BASEUS BS-CM013

Contents

Baseus Auto Restorable Car Phone Holder

Model: BS-CM013

Introduction

The Baseus Auto Restorable Car Phone Holder is designed for convenient and secure mounting of your smartphone in your vehicle. Featuring a gravity expansion mechanism, it allows for easy one-handed operation. The silicone stand provides a firm grip, and its air vent mounting design ensures hassle-free installation and removal. This holder is compatible with a wide range of smartphones and is engineered for stability on various road conditions.

Baseus car phone holder installed in a car air vent

Image: Baseus car phone holder securely mounted in a vehicle's air vent.

Setup Instructions

1. Tail Hook Assembly

  1. Unscrew the nut from the tail hook component.

    Step 1: Unscrew the nut from the tail hook component

    Image: Hands unscrewing the nut from the tail hook component.

  2. Install the unscrewed nut onto the ball joint, then place the ball joint into the groove of the main holder unit. Fasten the nut securely.

    Step 2: Place ball joint into groove and fasten nut

    Image: Hands placing the ball joint into the holder's groove and fastening the nut.

2. Mount Installation to Air Vent

  1. Unscrew the nut on the assembled tail hook unit.

    Step 1: Unscrew the nut on the tail hook unit

    Image: Hands unscrewing the nut on the tail hook unit before mounting.

  2. Identify a suitable location on your car's air vent. The holder is compatible with grid-type A/C outlets and should be installed vertically. It is not suitable for round or uniquely-shaped air vents.

    Step 2: Find an apt spot on the air vent

    Image: Identifying a suitable vertical air vent slat for installation.

  3. Hook the tail clip onto the air vent grille and then securely fasten the nut to lock the holder in place.

    Step 3: Hook the tail clip and fasten the nut

    Image: Hands hooking the tail clip onto the air vent and tightening the nut.

Diagram showing compatible and incompatible air vent types

Image: Visual guide for compatible (grid type) and incompatible (round) air vent designs.

Operating Instructions

Placing and Removing Your Phone

  • Placing Phone: Simply place your phone into the holder. The gravity expansion mechanism will automatically fasten the clamps around your device, securing it in place.

  • Removing Phone: Lift your phone upwards. The clamps will automatically restore to their original open position, allowing for smooth removal without snagging.

Diagram showing how to place and remove a phone from the holder

Image: Illustration of placing a phone (automatically fastens) and taking it out (restores to original position).

Adjusting Viewing Angle

The holder features an omnidirectional ball joint, allowing you to adjust your phone to various viewing angles for optimal visibility while driving.

Omnidirectional ball joint for adjusting viewing angles

Image: Close-up of the omnidirectional ball joint, highlighting its rotational capability.

Maintenance

To ensure optimal performance and longevity of your car phone holder, follow these simple maintenance guidelines:

  • Cleaning: Wipe the holder regularly with a soft, dry cloth to remove dust and grime. Avoid using harsh chemicals or abrasive materials that could damage the surface.
  • Inspection: Periodically check the nuts and clips to ensure they remain securely fastened to the air vent.
  • Storage: If not in use for an extended period, store the holder in a cool, dry place away from direct sunlight.

Troubleshooting

  • Holder is Squeaking: The holder is designed with an optimized structure and tighter gear bite to prevent squeaking. If you experience squeaking, ensure all nuts are tightly fastened and the holder is correctly installed on the air vent.
  • Phone is Not Held Securely / Falls Out:
    • Verify that your phone's size is within the compatible range of 5.4-6.7 inches.
    • Ensure your phone case thickness does not exceed 12mm, as extended clamp expansion is designed for this limit.
    • Confirm the holder is firmly attached to the air vent and the tail clip is properly hooked.
    • The Y-shaped gravitational structure provides a tight grasp; ensure your phone is centered and fully engaged with the clamps.
  • Holder is Loose / Wobbling: Re-check the installation steps, especially fastening the nut and hooking the tail clip to the air vent grille. Ensure the air vent slats are sturdy enough to support the holder and phone weight.
Internal structure of the holder showing springs for tight clamping

Image: Internal mechanism of the holder, illustrating the springs and optimized structure for tight, silent clamping.

Specifications

Feature Detail
Product Name Baseus Stable Series Gravitational Car Mount Air (Air Vent Version)
Model No. BS-CM013
Color Black, Creamy White
Material ABS+PC
Product Size 42mm (W) * 87mm (H) * 80mm (D)
Compatible Phone Size 5.4 - 6.7 inches
Compatible Air Vents Strip air vents (not for round or uniquely-shaped air vents)
Max Phone Case Thickness 12mm
Product Weight 0.117 kg
Package Dimensions 13cm (L) x 8cm (W) x 6cm (H)

Note: The above parameters are measured manually. It is normal for errors of 3-5mm to occur.

Compatible phone sizes from 5.4 to 6.7 inches

Image: Visual representation of compatible phone sizes (5.4" to 6.7").

Product dimensions diagram

Image: Diagram illustrating the product dimensions (42mm, 87mm, 80mm).

User Tips

  • Air Vent Direction: If your air vent can be adjusted, setting it to a neutral or slightly upward angle can help achieve an optimal viewing angle for your phone.
  • Vertical Fins: This holder has been noted to work well with vertical air vent fins, in addition to horizontal ones, provided they are of the strip-type design.
  • Secure Installation: Always ensure the holder is firmly installed and the nut is tightened to prevent wobbling, especially on uneven roads.
  • Phone Case Compatibility: The extended clamps accommodate phone cases up to 12mm thick. For thicker cases, the holder might not provide optimal grip.
  • Foldable Phones: For foldable phones like the Samsung Fold series, verify that the phone's dimensions when unfolded or folded (depending on how you intend to mount it) fall within the 5.4-6.7 inch compatibility range.

Warranty and Support

For any warranty claims, technical support, or inquiries regarding your Baseus Auto Restorable Car Phone Holder, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.