1. Introduction
This manual provides detailed instructions for the KRAKEN Iron-On Football Badges, Model 2024. These high-quality, customizable polyester patches are designed for easy application to various fabrics, allowing you to personalize your apparel and accessories with durable, printed designs. Please read these instructions carefully before application to ensure optimal results and longevity of your patch.
2. Product Overview
The KRAKEN Iron-On Football Badges are meticulously crafted, handmade patches featuring printed designs. They are made from durable polyester material and are designed for easy heat application. These badges are customizable, allowing for unique personalization.
Key Features:
- Material: High-quality POLYESTER for durability.
- Technics: PRINTED designs for clear and vibrant imagery.
- Style: Iron-On for convenient and secure application.
- Feature: HANDMADE craftsmanship ensures attention to detail.
- Customization: Yes, these patches are customizable.
3. Specifications
| Attribute | Detail |
|---|---|
| Product Type | Patches |
| Model Number | 2024 |
| Material | POLYESTER |
| Technics | PRINTED |
| Style | Iron-On |
| Feature | HANDMADE |
| Size | Approximately 10 x 9 cm |
| Origin | Mainland China |
| Package Weight | 0.01 kg |
| Package Dimensions (L x W x H) | 20 cm x 15 cm x 1 cm |
4. Setup and Application Instructions
To ensure proper adhesion and longevity of your iron-on badge, follow these steps carefully:
Materials Needed:
- Iron-On Badge
- Garment or fabric item
- Iron (household iron or heat press)
- Thin pressing cloth (e.g., pillowcase, thin towel)
- Hard, flat, heat-resistant surface (e.g., ironing board)
Application Steps:
- Prepare the Garment: Ensure the garment is clean, dry, and wrinkle-free. Iron the area where the patch will be applied to pre-heat the fabric.
- Preheat the Iron: Set your iron to the highest heat setting that your fabric can tolerate (usually Cotton or Linen setting). Ensure the steam function is turned OFF. Allow the iron to heat up completely.
- Position the Patch: Place the badge on the desired location of your garment, adhesive side down.
- Cover the Patch: Place a thin pressing cloth over the badge. This protects the badge and the fabric from direct heat.
- Apply Heat and Pressure: Press the hot iron firmly over the covered badge for approximately 20-30 seconds. Apply consistent, even pressure. Do not move the iron back and forth; hold it steady.
- Flip and Repeat: Turn the garment inside out and repeat step 5, pressing the iron firmly on the back of the patch area for another 20-30 seconds. This ensures the adhesive melts thoroughly into the fabric fibers.
- Cool Down: Allow the patch and garment to cool completely before handling. This is crucial for the adhesive to set properly.
- Check Adhesion: Gently lift the edge of the patch to check if it has adhered securely. If not, repeat steps 5-7.
5. Maintenance
To maintain the quality and adhesion of your KRAKEN Iron-On Football Badge, follow these care instructions:
- Washing: Wash garments with patches inside out in cold water on a gentle cycle.
- Detergent: Use a mild detergent. Avoid harsh chemicals or bleach.
- Drying: Air dry or tumble dry on a low heat setting. High heat can reactivate the adhesive and cause the patch to peel.
- Ironing: If ironing the garment, avoid direct contact with the patch. Iron around it or place a pressing cloth over the patch.
6. Troubleshooting
Common Issues and Solutions:
- Patch Not Sticking Properly:
- Ensure your iron is hot enough and steam is off.
- Apply firm, even pressure for the recommended time (20-30 seconds per side).
- Verify the fabric is suitable for iron-on application (e.g., cotton, denim, polyester blends). Avoid heat-sensitive materials like nylon or rayon.
- Edges of Patch Lifting:
- Re-apply heat and pressure to the lifting areas, ensuring the pressing cloth is in place.
- Allow sufficient cooling time after re-application.
- For extra security, especially on frequently washed items, consider sewing the edges of the patch.
- Patch Appears Damaged After Ironing:
- Ensure you used a pressing cloth to protect the patch from direct iron heat.
- Avoid moving the iron back and forth, as this can distort the patch.
7. User Tips
- For best results, always use a thin pressing cloth between the iron and the patch to prevent scorching and ensure even heat distribution.
- Allow the patch to cool completely after application before testing adhesion or moving the garment. This allows the adhesive to cure properly.
- If applying to a thick fabric, you may need to increase the pressing time slightly, but always monitor to avoid burning the fabric.
- For items that will undergo frequent washing or heavy use, consider adding a few stitches around the perimeter of the patch for enhanced durability.
8. Frequently Asked Questions (FAQ)
- Q: Can these patches be sewn on?
- A: Yes, while designed for iron-on application, these patches can also be sewn on for additional security and durability, especially on items that are frequently washed or subject to wear and tear.
- Q: What types of fabric are suitable for these iron-on patches?
- A: These patches work best on fabrics that can withstand high heat, such as cotton, denim, and polyester blends. Avoid applying to heat-sensitive materials like nylon, rayon, or leather, as the heat from the iron can damage them.
- Q: How long do iron-on patches typically last?
- A: With proper application and care, KRAKEN iron-on patches are designed to be durable. Their lifespan can vary depending on the fabric, frequency of washing, and how the item is used. Following the maintenance guidelines will help maximize their longevity.
- Q: Can I remove an iron-on patch?
- A: Removing an iron-on patch can be difficult and may leave adhesive residue or damage the fabric. It is generally not recommended. Ensure precise placement before application.
9. Warranty and Support
For any questions, concerns, or support regarding your KRAKEN Iron-On Football Badges, please contact the seller directly through the platform where you made your purchase. Please retain your purchase receipt for any inquiries.
