1. Product Overview
The QCY HT10 Ailybuds Pro are truly wireless in-ear earphones designed to deliver high-quality audio with advanced noise cancellation. Featuring Bluetooth 5.3 connectivity, these earbuds offer a stable connection and a comfortable listening experience. They are equipped with multiple microphones for clear calls and support the LDAC codec for superior sound.
Package Contents
- QCY HT10 Ailybuds Pro Earphones
- Charging Case
- USB-C Charging Cable
- Ear Tips (various sizes)
- User Manual

Image: Black QCY HT10 Ailybuds Pro earphones in their charging case.

Image: White QCY HT10 Ailybuds Pro earphones in their charging case.
2. Setup and Pairing
Initial Charging
Before first use, ensure the earphones and charging case are fully charged. Important: Some new earphones may have a protective film on the charging contacts. Please remove this film from both earbuds before placing them in the charging case for the first time.

Image: Notice highlighting the importance of removing the protective film from earbud charging contacts before use.
Bluetooth Pairing
- Open the charging case lid. The earbuds will automatically enter pairing mode, and the indicator light on the case will flash white.
- On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
- Select "QCY HT10" from the list of available devices to connect.
- Once connected, the indicator light on the case will turn off.
For subsequent use, the earphones will automatically connect to the last paired device when taken out of the case.
QCY App Connection
For full customization and access to advanced features, download the official QCY app from your device's app store. Follow the in-app instructions to connect your HT10 Ailybuds Pro.

Image: Visual guide for initial pairing and touch control functions.
3. Operating Instructions
Touch Controls
The QCY HT10 Ailybuds Pro feature intuitive touch controls on each earbud. The default functions are as follows:
- Single Tap (L/R): Play/Pause music, Answer/End a phone call.
- Double Tap (L/R): Next Track.
- Triple Tap (L): Activate Voice Assistant.
- Triple Tap (R): Toggle Game Mode.
- Long Press (L/R, 1.5s): Cycle through ANC modes (ANC On, Transparency Mode, ANC Off).
These controls can be customized further using the QCY app.
Active Noise Cancellation (ANC)
The earphones offer up to 43dB of noise cancellation with four distinct modes:
- Indoor Mode: Optimized for quiet environments.
- Commuting Mode: Reduces ambient noise in public transport.
- Outdoor Mode: Effective against wind and general outdoor sounds.
- Transparency Mode: Allows you to hear your surroundings without removing the earbuds.
Cycle through these modes by long-pressing either earbud for 1.5 seconds, or select your preferred mode via the QCY app.
Game Mode
Activate Game Mode for ultra-low latency audio, providing a more synchronized experience for gaming and video playback. Game mode is off by default when set in the app to conserve battery.
4. Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Use a cotton swab lightly dampened with isopropyl alcohol to clean the charging contacts on both the earbuds and the case. Ensure they are completely dry before charging.
- Remove ear tips and clean them with water and mild soap if necessary. Allow them to dry completely before reattaching.
Charging
- Charge the case using the provided USB-C cable connected to a standard USB power adapter (not included).
- The indicator light on the case will show charging status.
- Store the earbuds in the charging case when not in use to protect them and keep them charged.
Firmware Updates
QCY regularly releases firmware updates to improve performance and add new features. It is recommended to keep your earphones updated to the latest firmware version for optimal experience.

Image: Firmware update notice for QCY HT10 Ailybuds Pro, detailing improvements such as optimized ANC and improved sound quality.
Recent Firmware Improvements (Version 4.1.0.9 for HT10 Ailybuds Pro):
- Added FB noise reduction and optimized adaptive ANC noise reduction for improved depth and effect.
- Functionality added to maintain AEQ parameters after download, enhancing sound quality.
- Adjusted FB's EC parameters to resolve sound quality degradation when ANC is active during music playback.
- Game mode is now off by default when set in the app, contributing to reduced battery consumption.
5. Troubleshooting
Earbuds Not Charging
- Ensure the protective film has been removed from the charging contacts on both earbuds.
- Clean the charging contacts on both the earbuds and inside the charging case with a dry cotton swab.
- Make sure the charging cable is securely connected to the case and the power source.
- Check if the charging case itself has sufficient battery.
Earbuds Not Pairing/Connecting
- Ensure Bluetooth is enabled on your device and the earbuds are within range.
- Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid and try pairing again.
- If the issue persists, try resetting the earbuds (refer to the QCY app or manufacturer's support for specific reset instructions).
- Ensure your device's operating system (Android/iOS) is compatible. Compatibility with PCs, laptops, gaming devices, or TVs is not guaranteed.
Sound Quality Issues
- Ensure the ear tips provide a good seal in your ear canal. Try different sizes if needed.
- Check for any obstructions in the earbud nozzles.
- Update the earbud firmware via the QCY app, as updates often include sound quality improvements.
- If experiencing sound degradation with ANC on, ensure your firmware is updated to address potential EC parameter issues.
One Earbud Not Working
- Place both earbuds back in the case, close the lid, and then take them out again.
- Check if both earbuds are charged.
- Try resetting the earbuds.
6. Specifications

Image: Detailed technical specifications and battery performance.
| Feature | Detail |
|---|---|
| Brand Name | QCY |
| Model | HT10 Ailybuds Pro |
| Material | ABS |
| Wireless Type | Bluetooth |
| Bluetooth Version | 5.3 |
| Supported Profiles | HFP/A2DP/AVRCP |
| Maximum Wireless Range | <10m |
| Sound Isolating | Yes |
| Active Noise Cancellation (ANC) | Up to 43dB, 4 modes (Indoor, Commuting, Outdoor, Transparency) |
| Driver Size | 10mm Bio-diaphragm Dynamic Driver |
| Audio Codec Support | LDAC, AAC, SBC |
| Microphones | 6 microphones for clear calls |
| Waterproof Rating | IPX5 |
| Volume Control | Yes |
| Control Button | Yes (Touch Controls) |
| Earbud Battery Capacity | 40mAh (each) |
| Charging Case Battery Capacity | 350mAh |
| Charging Port | USB-C |
| Earbud Charging Time | Approx. 1.5 hours |
| Case Charging Time | Approx. 2 hours |
| Music Playtime (Earbuds) | Approx. 7 hours |
| Total Playtime (with Case) | Approx. 30 hours |
| Origin | Mainland China |
7. Warranty and Support
For warranty information, please refer to the specific terms provided by your retailer or the official QCY website. If you encounter any issues or require technical assistance, please contact the seller or QCY customer support directly.
8. User Tips
- Optimal Fit: Experiment with the different ear tip sizes provided to find the best fit for your ears. A good seal is crucial for effective noise cancellation and sound quality.
- Regular Updates: Keep the QCY app installed and regularly check for firmware updates for your HT10 Ailybuds Pro. Updates often bring performance enhancements and bug fixes.
- Clean Contacts: If you experience charging issues, always check and clean the charging contacts on both the earbuds and the case.
- App Customization: Utilize the QCY app to personalize your listening experience, including adjusting EQ settings and customizing touch controls to your preference.
- Compatibility Check: While compatible with Android and iOS, if you plan to use the earbuds with other devices like PCs or TVs, verify compatibility with the device manufacturer or QCY support.