VGR V-733 6-in-1 Professional Hair Removal Tool

Introduction

Thank you for choosing the VGR V-733 6-in-1 Professional Hair Removal Tool. This versatile device is designed to provide a comprehensive personal care experience, offering epilation, shaving, callus removal, facial cleaning, massage, and facial hair trimming functions. With its IPX7 waterproof rating, two-speed settings, and convenient USB charging, the V-733 ensures efficient and comfortable use. Please read this manual carefully before first use to ensure safe and optimal performance.

Safety Information

• Keep the device away from children.
• Do not use the device if it is damaged or malfunctioning.
• Ensure the charging port is dry before connecting the USB cable.
• Do not immerse the charging cable or adapter in water.
• Avoid using the epilator on irritated, sunburned, or broken skin.
• Consult a doctor if you have any skin conditions or concerns before using the device.

Product Overview

The VGR V-733 is a multi-functional device with interchangeable heads for various grooming needs. Below is an illustration of the main unit and its components, followed by a list of included accessories.

Included Components:

• 1 x Hair Remover Main Unit
• 1 x Epilator Head
• 1 x Callus Remover Head
• 1 x Shaver Head
• 1 x Facial Cleaning Head
• 1 x Massage Head
• 1 x Facial Hair Trimmer Head
• 1 x USB Charging Cable
• 1 x Cleaning Brush
• 1 x Instruction Manual

Setup

1. Charging the Device

Before first use, fully charge the device. The LED display will show the battery level. A full charge takes approximately 1.5 hours and provides up to 90 minutes of operating time.

1. Ensure the device is turned off.
2. Connect the USB charging cable to the USB charging port on the bottom of the device.
3. Plug the other end of the USB cable into a compatible USB power source (e.g., computer, laptop, USB adapter, power bank).
4. The LED display will indicate charging status. Once fully charged, disconnect the cable.

2. Attaching/Detaching Heads

1. To attach a head: Align the desired head with the main unit and press it down until it clicks into place.
2. To detach a head: Press the head release button (refer to Figure 1) and gently pull the head upwards to remove it.

Operating Instructions

The VGR V-733 features two-speed settings for a customized experience. Press the ON/OFF button to turn on the device. Press it again to switch between speeds. The LED display shows the current battery level.

1. Epilator Head (No. 1)

For effective hair removal from legs, arms, underarms, and bikini area.

1. Ensure skin is clean and dry, or use in the shower/bath (IPX7 waterproof).
2. Hold the device at a 90-degree angle to the skin, moving it slowly against the direction of hair growth.
3. Stretch the skin taut with your free hand to help the epilator glide smoothly.

2. Callus Remover Head (No. 2)

For smoothing rough skin on feet.

1. Use on dry or wet feet.
2. Gently move the callus remover over rough areas, applying light pressure.
3. Do not apply excessive pressure or stay in one area for too long.

3. Shaver Head (No. 3)

For a close and precise shave on various body parts.

1. Can be used wet or dry.
2. Glide the shaver head gently over the skin, moving against the direction of hair growth for best results.

4. Facial Cleaning Head (No. 4)

For deep cleansing of facial skin.

1. Apply your preferred facial cleanser to your face or the brush head.
2. Gently move the brush in circular motions across your face.
3. Rinse your face and the brush head after use.

5. Massage Head (No. 5)

For relaxing facial or body massage.

1. Apply a small amount of massage oil or cream if desired.
2. Gently glide the massage head over the desired area.

6. Facial Hair Trimmer Head (No. 6)

For precise trimming of delicate facial hair.

1. Use on clean, dry skin.
2. Carefully trim unwanted facial hair.

Wet Use Demonstration:

Maintenance

Cleaning

Regular cleaning ensures optimal performance and hygiene.

1. Turn off and detach the head after each use.
2. Use the provided cleaning brush to remove any trapped hairs or debris from the head.
3. For thorough cleaning, the device is IPX7 waterproof and can be rinsed under running water. Ensure the main unit's charging port is covered or dry before rinsing.
4. Allow all parts to air dry completely before reattaching or storing.

Storage

• Store the device and its accessories in a cool, dry place, away from direct sunlight.
• Keep the protective caps on the heads when not in use.

Troubleshooting

Specifications

User Tips

• For best epilation results, exfoliate your skin a day before to prevent ingrown hairs.
• When using the epilator, hold your skin taut to minimize discomfort and ensure efficient hair removal.
• Always start with the lowest speed setting, especially if you are new to epilation or have sensitive skin, and gradually increase if comfortable.
• After wet use, always detach the head and rinse both the head and the main unit thoroughly, then allow them to air dry completely to prevent mildew and maintain hygiene.
• Regularly clean all attachment heads to ensure optimal performance and longevity of the device.

Warranty and Support

Warranty

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

Support

If you encounter any issues with your VGR V-733 device, please refer to the troubleshooting section of this manual. If the problem persists, contact the retailer or the VGR customer support for assistance. Please ensure the item remains in its original condition when reporting damage or issues.