1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your KERUI 120db Tuya Smart WiFi Loudly Speaker Alarm System. This system is designed to enhance your home security by providing loud audible alarms and smart notifications through the Tuya Smart APP, compatible with Google Home and Amazon Alexa.
Important Tip:
The siren unit cannot function independently. It must be used in conjunction with remote controls and wireless accessories such as door/window sensors or PIR motion detectors.
2. Safety Information
- Ensure the power supply is correctly connected according to specifications.
- Do not expose the device to extreme temperatures or humidity.
- Keep the device away from water and direct sunlight.
- Handle all components with care to prevent damage.
- For optimal performance, ensure your Wi-Fi network is stable and operates on 2.4GHz.
3. Package Contents
The KERUI 120db Tuya Smart WiFi Loudly Speaker Alarm System is available in various kits. Please refer to your specific kit for exact contents:
- Speaker Alarm KIT 1:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- Speaker Alarm KIT 2:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 1x Motion Sensor
- 2x Door Sensor
- 2x Remote Control
- Speaker Alarm KIT 3:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 2x Motion Sensor
- 2x Door Sensor
- 2x Remote Control
- Speaker Alarm KIT 4:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 2x Motion Sensor
- 5x Door Sensor
- 2x Remote Control
- Speaker Alarm KIT 5:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 1x Motion Sensor
- 1x Door Sensor
- 1x Remote Control
- Speaker Alarm KIT 6:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 3x Motion Sensor
- 5x Door Sensor
- 3x Remote Control
- Speaker Alarm KIT 7:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 3x Motion Sensor
- 4x Door Sensor
- 3x Remote Control
- 1x F15 Doorbell Button (white)
- Speaker Alarm KIT 8:
- 1x Speaker Alarm
- 1x DC 9V 1A Power Supply
- 5x Motion Sensor
- 7x Door Sensor
- 3x Remote Control
4. Product Overview
The KERUI Smart WiFi Loudly Speaker Alarm System is a comprehensive home security solution. It features a loud siren, smart app control via Tuya Smart, and compatibility with various wireless sensors and remote controls. The system supports real-time notifications and integration with voice assistants like Amazon Alexa and Google Assistant.
Key Features:
- 120db Loud Siren: Deters intruders with a powerful alarm sound.
- Tuya Smart APP Control: Easy setup and management via mobile application.
- WiFi Connectivity (2.4GHz): Ensures stable and reliable alarm performance with APP push notifications.
- Expandable System: Supports up to 30 wireless detectors and 20 remote controllers/doorbell buttons.
- Customizable Accessories: Name accessories and set specific zone modes (e.g., 24-hour for smoke sensors).
- Real-time Notifications: Receive instant alerts on your phone when an event occurs.
- Voice Assistant Integration: Compatible with Amazon Alexa and Google Assistant.
- Weatherproof Design: The siren features a weatherproof cover for outdoor use.
5. Setup
5.1 Download and Install Tuya Smart APP
- For Android smartphones: Download "Tuya Smart" from the Google Play Store.
- For Apple smartphones: Download "Tuya Smart" from the App Store.
- Register and log in to your Tuya Smart account.
5.2 Host Networking (Connecting to Wi-Fi)
- Ensure your phone is connected to a 2.4G Wi-Fi network and Bluetooth is enabled.
- Long press the [SET Key] on the Wi-Fi horn for 3 seconds. The host will sound and enter network distribution mode.
- Open the Tuya Smart APP, click "Add Device". The app will automatically search for nearby devices.
- Once the device is found, click "Add" and enter your Wi-Fi password to connect.
- After successful addition, you can operate and configure the device via the APP.
5.3 Adding Accessories (Sensors and Remote Controls)
The system supports up to 30 wireless detectors and 20 remote controllers or doorbell buttons.
- Via SET Key on the Horn: Press the SET button on the horn. Then, trigger the detector (e.g., open a door for a door sensor, wave hand in front of PIR). The horn will ring once, indicating successful pairing.
- Via Tuya Smart APP: Click on "Accessories" in the APP, then click the "+" sign in the upper right corner. Trigger the detector to add it.
5.4 Setting Accessory Properties
You can customize the properties of each detector according to your needs:
- Name: Assign a custom name (e.g., "Front Door", "Living Room PIR").
- Zone Mode: Select from options like:
- Normal: Standard arming/disarming behavior.
- 24 Hours: Always active, triggers alarm regardless of system arming status (e.g., for smoke or gas detectors).
- Delay: Triggers alarm after a set delay.
- 24 Hours Silent: Always active, but triggers a silent alarm (notification only).
- Home with delay: Active in Home Arm mode with a delay.
- Type: Specify the sensor type (e.g., Motion PIR, Door Contact, Smoke, Gas, Carbon Monoxide, Water Immersion, Vibration).
6. Operating Instructions
6.1 Arming and Disarming Modes
- Away Arm: When you leave, the host enters an alert state. If any detector is triggered, the host will immediately sound the alarm.
- Home Arm: When you are at home, the host responds only to designated entrance or exit detectors, allowing free movement within other areas.
- Disarmed: The host stops any ongoing alarm. In this mode, general defense areas will not trigger an alarm (except for emergency alarms or 24-hour zone sensors).
6.2 Delay Settings
- Deployment Delay: A set period after arming to allow users to exit the premises without triggering the alarm.
- Alarm Delay (Entry Delay): A set period after a detector is triggered (e.g., entering through a door) to allow the user to disarm the system before the alarm sounds. This can be set from 1-199 seconds.
- Alarm Duration: The length of time the siren will sound, typically configurable from 1-4 minutes.
6.3 Panic Function
When the panic function is activated, the system will:
- Generate an audible and visual alarm on-site.
- Send an alarm message to your preset mobile phone.
- Dial the preset user phone number.
- Push the alarm content to the mobile phone app.
6.4 Real-time Notifications
The system sends instant push notifications to your phone when a sensor is triggered, ensuring you are aware of any events even when away from home.
6.5 Setup Arm/Disarm Timer
You can schedule specific times for the system to arm or disarm automatically:
- Enter "SETTINGS" in the Tuya Smart app.
- Navigate to "TIMER" to set your desired arm/disarm schedule.
6.6 Voice Assistant Integration
The system is compatible with Amazon Alexa and Google Assistant, allowing for voice control of your alarm system. For detailed connection instructions, please refer to the YouTube link: https://youtu.be/YS7EyJZ3Nq8
7. Specifications
7.1 Main Host (Siren) Specifications
| Feature | Specification |
|---|---|
| Input Voltage | DC 9V-12V |
| Working Current | <200mA |
| Standby Current | <80mA |
| Alarm Output | <500mA |
| Wireless Frequency | 433MHz |
| Wireless Code | eV1527 |
| Wi-Fi Standard | IEEE802.11b/G/N wireless (2.4GHz only) |
| Operating Temperature | -10℃ ~ 55℃ |
| Relative Humidity | <80% (no condensation) |
| Power Cable Length | Approx. 92cm / 3ft (extendable) |
7.2 Remote Control Specifications
- Wireless Frequency: 433MHz
- Wireless Code: 1527
- Transmission Distance: 100 meters (barrier-free)
- Power Supply: 1 x 23A 12V battery
- Operating Current: ≤15mA
7.3 PIR Motion Sensor Specifications
- Wireless Frequency: 433MHz
- Wireless Code: 1527
- Wireless Distance: 100 meters (open space)
- Power Supply: 1 x 9V 6F22 battery
- Detection Range: Vertical 60°, Horizontal 110°
- Detection Distance: 0-8M
- Quiescent Current: 30-45uA
- Working Current: 30-120mA
7.4 Wireless Door Sensor Detector Specifications
- Wireless Frequency: 433MHz
- Wireless Code: 1527
- Wireless Distance: 100 meters (open space)
- Power Supply: 1 x 23A 12V battery
8. Troubleshooting (Q&A)
- Q1: Do I need to order an alarm panel (control center) for this siren?
- A1: No, this siren functions as an alarm system itself. It can work directly with wireless sensors to protect your house.
- Q2: Does this siren system support adding extra sensors or remote controllers? How many?
- A2: Yes! This siren alarm system can work with up to 20 remote controllers (including doorbell buttons) and up to 30 wireless sensors. Supported sensor types include gas detectors, smoke detectors, CO carbon detectors, door/window sensors, PIR motion detectors, water leakage sensors, vibration sensors, and glass break detectors.
- Q3: Can I control 2 or more sirens by using 1 remote controller or more? For example, if I have 6 rooms and want to install 6 sirens and control all of them with 2 or more controllers?
- A3: Yes! You can use one remote controller to control multiple siren systems. Alternatively, a single sensor can be programmed to trigger multiple sirens simultaneously.
9. Maintenance
- Regularly check battery levels of wireless sensors and remote controls and replace them as needed.
- Keep the siren and sensors clean and free from dust or obstructions.
- Test the alarm system periodically to ensure all components are functioning correctly.
- Ensure the Wi-Fi connection is stable for continuous monitoring and notifications.
- Avoid painting over sensors or the siren, as this may affect performance.
10. Warranty and Support
For warranty information and technical support, please refer to the official KERUI website or contact your retailer. A user manual in PDF format is available for download, which may contain additional details: User manual (PDF).