HOCO EQ17 ANC Mini Stereo Earbuds User Manual

1. Introduction

Thank you for choosing the HOCO EQ17 ANC Mini Stereo Earbuds. These wireless earbuds are designed to provide a high-fidelity audio experience with active noise cancellation, low latency, and comfortable wear. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

2. Package Contents

• HOCO EQ17 ANC Mini Stereo Earbuds (Left and Right)
• Charging Case
• USB Type-C Charging Cable
• Silicone Ear Caps (Multiple Sizes)
• User Manual (This document)

3. Setup

3.1 Charging the Earbuds and Case

Before first use, ensure both the earbuds and the charging case are fully charged. Place the earbuds into the charging case. Connect the USB Type-C charging cable to the charging port on the case and plug the other end into a compatible USB power source. The indicator light on the case will show charging status and turn off or change color when fully charged.

3.2 Selecting the Right Ear Caps

For optimal sound quality and comfort, choose the silicone ear caps that best fit your ears. A proper seal is essential for effective noise cancellation and bass response. Experiment with the different sizes provided to find the most comfortable and secure fit.

3.3 Initial Pairing

1. Open the charging case. The earbuds will automatically power on and enter pairing mode.
2. On your mobile device, enable Bluetooth and search for available devices.
3. Select "HOCO EQ17" from the list of devices.
4. Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.

The earbuds feature Bluetooth 5.4 technology for a stable and efficient connection. After the initial pairing, they will automatically connect to your device when removed from the case, provided Bluetooth is enabled on your device.

4. Operating Instructions

4.1 Power On/Off

• Power On: Open the charging case, and the earbuds will automatically power on.
• Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.

4.2 Smart Touch Controls

The HOCO EQ17 earbuds feature intuitive touch controls on each earbud. The functions are as follows:

4.3 Active Noise Cancellation (ANC) and Transparency Mode

The earbuds support Active Noise Cancellation (ANC) to reduce ambient noise, allowing you to enjoy your music without distractions. They also feature an external human voice reception function, often referred to as Transparency Mode, which allows you to hear your surroundings without removing the earbuds. The method to switch between ANC and Transparency Mode is typically a long press or multiple taps on one of the earbuds, though specific instructions are not provided. Please refer to the product packaging or manufacturer's website for detailed control gestures if not covered here.

5. Maintenance

• Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials. Remove ear caps and clean them separately with mild soap and water if necessary, ensuring they are completely dry before reattaching.
• Storage: When not in use, always store the earbuds in their charging case to protect them and keep them charged.
• Water Resistance: The earbuds are waterproof. However, avoid prolonged exposure to water or submersion. Dry them thoroughly before placing them back in the charging case.
• Battery Care: To prolong battery life, avoid fully discharging the earbuds and charging case frequently. Charge them regularly, even if not in constant use.

6. Troubleshooting

• Earbuds not pairing:
  • Ensure both earbuds are charged.
  • Place them back in the case, close the lid, wait a few seconds, then open it again to re-enter pairing mode.
  • Turn off and on Bluetooth on your device.
  • Forget "HOCO EQ17" from your device's Bluetooth settings and try pairing again.
• Only one earbud working:
  • Ensure both earbuds are charged.
  • Try placing both earbuds back in the case, closing the lid, and then taking them out again.
  • Perform a factory reset if available (refer to manufacturer's website if not specified here).
• Poor sound quality or low volume:
  • Ensure the ear caps provide a good seal in your ear canal.
  • Clean any debris from the earbud nozzles.
  • Check the volume levels on both your device and the earbuds.
  • Ensure there are no obstructions between your device and the earbuds.
• Earbuds not charging:
  • Ensure the charging cable is securely connected to both the case and the power source.
  • Check if the charging port is clean and free of debris.
  • Try a different USB cable or power adapter.
  • Ensure the earbuds are correctly seated in the charging case.

7. Specifications

8. User Tips

• Optimal Fit: Always ensure you're using the correct size ear tips for a snug fit. This significantly impacts sound quality, bass, and ANC performance.
• Low Latency Advantage: The low latency feature makes these earbuds ideal for watching videos or mobile gaming, minimizing audio-visual sync issues.
• Voice Assistant: Utilize the voice assistant feature for hands-free control of your device, making tasks like calling, sending messages, or getting directions more convenient.
• ANC in Noisy Environments: Activate Active Noise Cancellation in loud environments like public transport or busy offices to fully immerse yourself in your audio.
• Transparency Mode for Awareness: Use Transparency Mode when you need to be aware of your surroundings, such as walking in a city or listening for announcements.

9. Warranty & Support

For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.