TODIMART S9 Electric Scooter User Manual

1. Introduction

Thank you for choosing the TODIMART S9 Electric Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your scooter. Please read it thoroughly before your first ride to ensure optimal performance and safety.

2. Safety Guidelines

Always prioritize safety when operating your electric scooter. Failure to follow these guidelines may result in injury or damage to the scooter.

• Wear a helmet and appropriate protective gear (knee pads, elbow pads) at all times.
• Ensure all screws and quick-release mechanisms are securely fastened before each ride.
• Do not ride in heavy rain, on icy surfaces, or through deep puddles.
• Adhere to local traffic laws and regulations for electric scooters.
• Avoid riding under the influence of alcohol or drugs.
• Maintain a safe distance from other vehicles and pedestrians.
• The maximum load capacity is 130 kg. Do not exceed this limit.

3. Setup and Assembly

3.1 Unfolding the Scooter

1. Place the scooter on a flat surface.
2. Locate the folding mechanism near the base of the steering column.
3. Release the locking latch and carefully lift the steering column until it clicks into place.
4. Ensure the locking mechanism is fully engaged and secure.

3.2 Initial Charging

Before your first ride, fully charge the scooter's battery.

1. Locate the charging port, typically on the side of the deck.
2. Connect the charger to the scooter, then plug it into a power outlet.
3. The charging indicator on the charger will show the charging status (e.g., red for charging, green for fully charged).
4. A full charge takes approximately 8-10 hours.

3.3 Tire Check

The S9 is equipped with 10-inch all-terrain tubeless tires. Before each ride, visually inspect the tires for any damage or punctures. Ensure they have stable air pressure for optimal performance and safety.

4. Operating Instructions

4.1 Powering On/Off

Press and hold the power button on the intelligent LCD display to turn the scooter on or off.

4.2 Using the LCD Display and Controls

The multifunctional HD LED display provides real-time driving information:

• Instant Speed: Shows your current speed.
• Current Speed Mode: Indicates the selected speed gear (the scooter features 3 adjustable speeds).
• Battery Life: Displays the remaining battery charge.
• Lighting Status: Shows if headlights and rear lights are active.
• Odometer: Tracks total distance traveled.

Handlebar controls include:

• Speed Regulator: Adjusts acceleration.
• Turn Signals: Left and right indicators for signaling turns.
• Headlight Button: Activates the front LED headlight.
• Horn Button: For alerting others.

4.3 Riding

• Acceleration: Use the speed regulator to gradually increase speed.
• Braking: Apply the brake levers. The rear stop light automatically illuminates when braking for enhanced safety.
• Lighting: Activate LED headlights and rear lights, including left and right direction indicators, especially when riding at night or in low visibility conditions.
• Terrain: The 10-inch all-terrain tires are designed for various road conditions, including dirt, gravel, sand, and grass.
• Climbing: The 1000W motor provides efficient power for climbing slopes up to 30 degrees.

5. Maintenance

5.1 Battery Care

• Charge the battery fully after each use, especially if it will be stored for an extended period.
• Avoid completely draining the battery, as this can reduce its lifespan.
• Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.

5.2 Tire Maintenance

• Regularly inspect tires for wear, cuts, or embedded objects.
• Maintain stable air pressure in the tubeless tires to ensure optimal performance and prevent punctures.

5.3 General Cleaning

• Wipe down the scooter with a damp cloth after use.
• Avoid using high-pressure water jets directly on electronic components.
• Do not use abrasive cleaners or solvents that could damage the finish.

5.4 Suspension System

The S9 features double front and rear shock absorbers for a comfortable ride. Periodically check the suspension components for any signs of wear or damage.

6. Troubleshooting

If you encounter issues with your TODIMART S9 scooter, please refer to the following common problems and solutions:

• Scooter does not power on: Ensure the battery is charged. Check all connections.
• Reduced range or power: Fully charge the battery. Check tire pressure.
• Unusual noises: Inspect for loose components or debris.
• Brakes not responding: Check brake cable tension and brake pad wear.

For persistent issues or problems not listed here, please contact customer support.

7. Specifications

8. Warranty and Support

The TODIMART S9 Electric Scooter comes with a warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your seller. If you experience any problems with your electric scooter, the seller's after-sales service team is available to assist you.

9. User Tips

• Check Local Regulations: Before riding, familiarize yourself with local laws regarding electric scooter usage, including speed limits and areas where they are permitted.
• Regular Inspections: A quick check of tire pressure, brake function, and overall scooter stability before each ride can prevent many issues.
• Battery Management: For optimal battery longevity, avoid frequent deep discharges and try to keep the charge level between 20% and 80% during regular use.