1. Introduction
Thank you for choosing the ORIA Electric Screwdriver Set 33 in 1. This precision tool kit is designed for delicate electronic repairs, offering both electric and manual modes to handle a wide range of tasks. This manual provides essential information for the safe and efficient use of your new screwdriver set.
2. Safety Information
- Always use the correct bit size for the screw to prevent stripping.
- Keep the tool and accessories out of reach of children.
- Do not expose the screwdriver to water or excessive moisture.
- Avoid disassembling the screwdriver handle, as this may void the warranty and cause damage.
- Ensure the screwdriver is fully charged before use to maintain optimal performance.
- Do not apply excessive force in electric mode; switch to manual mode if higher torque is required.
3. Package Contents
Your ORIA Electric Screwdriver Set includes the following items:
- 1 x Electric Screwdriver Handle
- 24 x S2 Precision Bits (6pcs H4*38mm, 18pcs H4*28mm)
- 1 x Magnetizer
- 5 x Opening Picks (Prying Pieces)
- 1 x Magnetic Mat
- 1 x USB Charging Cable
- 1 x Storage Case
4. Product Overview
Familiarize yourself with the main components of the electric screwdriver:
- Charging Indicator: Shows charging status.
- LED Switch/Gear Adjust: Controls the LED light and switches between electric torque gears.
- Reverse Button: Rotates the bit counter-clockwise for loosening screws.
- Forward Button: Rotates the bit clockwise for tightening screws.
- LED Light: Illuminates the work area.
- Magnetic Bit Socket: Securely holds the screwdriver bits.
- Type-C Charging Port: For connecting the USB charging cable.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ORIA |
| Model Number | electric Screwdriver kit |
| Type | Magnetic Screwdriver |
| Power Source | DC |
| Rated Voltage | 3.7V (3.6v) |
| Rated Input Power | 7.4W |
| Battery Type | Lithium battery |
| Battery Capacity | 350mAh |
| Battery Size | 10440 |
| Charging Voltage | 4.5V-6.5V |
| Charging Current | 0.35A |
| Charging Time | >60 minutes (Red light on during charging, off when fully charged) |
| No-load Speed/Current | 200 RPM / 100mAh |
| Light Load Speed | 150 RPM / 150mAh-300mAh |
| Electric Torque Adjustment | 0.15-0.35 N.m |
| Manual Torque | >5 N.m |
| Lighting Method | 3LED |
| Battery Life | Continuous use for 90 minutes, standby for 60 days (usage dependent) |
| Weight | 348g |
| Certification | CE, FCC |
| Origin | Mainland China |
| Use | Home DIY |
6. Setup
6.1 Charging the Screwdriver
- Locate the Type-C charging port on the screwdriver handle.
- Connect the provided USB charging cable to the screwdriver and a compatible USB power source (e.g., computer, wall adapter).
- The charging indicator light will turn red during charging. It will turn off once the battery is fully charged. Charging typically takes over 60 minutes.
6.2 Installing Bits
- Select the appropriate precision bit for your task from the 24 included bits.
- Insert the bit firmly into the magnetic bit socket at the tip of the screwdriver. The magnetic design will hold it securely.
6.3 Using the Magnetizer
To enhance the magnetic properties of the bits for better screw retention, use the included magnetizer:
- To magnetize a bit, slide it through the '+' opening of the magnetizer several times.
- To demagnetize a bit, slide it through the '-' opening several times.
7. Operating Instructions
7.1 Electric Mode Operation
- To activate electric mode, press and hold the LED Switch/Gear Adjust button for 3 seconds.
- The screwdriver offers two electric torque gears: Low Gear (0.15 N.m) and High Gear (0.35 N.m). Use the LED Switch/Gear Adjust button to cycle between these gears as needed for different tasks.
- Press the Forward Button to tighten screws (clockwise rotation).
- Press the Reverse Button to loosen screws (counter-clockwise rotation).
- The idling speed in electric mode is 200 RPM.
7.2 Manual Mode Operation
For tasks requiring higher torque (greater than 5 N.m) or for initial loosening/final tightening of stubborn screws, the screwdriver can be used in manual mode. Simply apply manual force to turn the screwdriver as you would with a traditional screwdriver.
7.3 LED Working Light
The screwdriver is equipped with an LED light to illuminate dark work areas. This light automatically activates when the screwdriver is in operation, helping to align screws and improve visibility.
7.4 Product Demonstration Video
8. Maintenance
- Cleaning: Wipe the screwdriver handle and bits with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
- Storage: Store the screwdriver set in its provided storage case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery longevity, avoid completely draining the battery frequently. Charge the screwdriver regularly, even if not in constant use.
9. Troubleshooting
- Screwdriver not turning on: Ensure the battery is sufficiently charged. Connect the USB charging cable and allow it to charge for over 60 minutes.
- Bits not holding screws: Use the included magnetizer to re-magnetize the bit. Ensure the screw is ferrous (magnetic).
- Insufficient torque in electric mode: Switch to the higher electric gear (0.35 N.m) or use the screwdriver in manual mode for tasks requiring more than 0.35 N.m of torque.
- LED light not working: Check if the screwdriver is powered on. If the issue persists, ensure the battery is charged.
10. User Tips
- For very small or delicate screws, it is often best to start in manual mode to avoid overtightening and potential damage to the screw head or component.
- Always utilize the magnetic mat provided to organize and prevent the loss of tiny screws and components during disassembly and reassembly.
- Ensure you select the exact correct bit size for each screw to prevent stripping the screw head, which can make removal extremely difficult.
- When working on sensitive electronics, discharge any static electricity from your body before handling components.
11. Warranty and Support
For any questions, technical support, or warranty inquiries regarding your ORIA Electric Screwdriver Set, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for warranty claims.
