1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Zemismart Matter Over WiFi Smart Slide Curtain Motor. This smart curtain motor is designed to integrate seamlessly with various smart home ecosystems, offering convenient control over your curtains via app, voice commands, or remote control. It supports Matter, enabling compatibility with platforms such as Apple Home, Amazon Alexa, Google Home, and SmartThings.
2. Safety Information
- Ensure the power supply voltage matches the product's specifications (110-240V).
- Do not expose the motor or electrical components to water or excessive moisture.
- Keep hands and loose clothing clear of the curtain track and motor during operation.
- Installation should be performed by a qualified individual if you are unsure about electrical wiring.
- Disconnect power before performing any maintenance or troubleshooting.
- This device is for indoor use only.
3. Package Contents
The package includes the following items:
| No. | Product | Quantity |
|---|---|---|
| 1 | Curtain motor | 1 PCS |
| 2 | Master track | 1 PCS |
| 3 | Sub driver | 1 PCS |
| 4 | Track | Various lengths (e.g., 100cm, 50cm, 20cm, 10cm) |
| 5 | Adjustment screw | 1 PCS |
| 6 | Sub-drive box end cover | 1 PCS |
| 7 | Extended hook | 1 PCS/SET |
| 8 | Wheel Runner | 10 PCS/meter |
| 9 | Ceiling bracket | 0.5 meter/PCS |
| 10 | Side bracket | 0.5 meter/PCS (optional) |
| 11 | Connector | Various types, 2 kinds of size |
| 12 | End hook | 1 PCS |
| 13 | Remote control | 1 PCS |
| 14 | Fastening clip | 1 PCS |
| 15 | Power cable | 1 PCS (Length: 1.5m) |
Note: The remote control requires a CR2450 button cell, which is not included in the product list.
4. Product Overview
The Zemismart Matter Over WiFi Smart Slide Curtain Motor offers a range of features for modern smart homes:
- Matter Control: Supports Matter-certified ecosystems for broad compatibility.
- Voice Control: Compatible with Siri, Alexa, Google Home, and Bixby for hands-free operation.
- RF Remote Control: Includes a dedicated remote for direct control, usable handheld or wall-mounted.
- Power Off Manual Function: Curtains can be opened and closed manually during power outages.
- Easy Installation: Splicing design allows for quick and simple track assembly without special tools.
- Super Silent Design: Operates quietly.
- Automatic Limit Setting: Automatically sets open and close limits.
- Wireless Remote Control and Receiver: Integrated wireless control.
- Resistance and Stop Function: Stops if an obstruction is detected.
- Hand Light Touch-Start Function: Gently pull the curtain to initiate movement.
- Fabric Rebound Journey Correction: Adjusts for fabric movement.
- Long Service Life: Durable construction.
- Speed Adjustable: Customize curtain movement speed.
- Variety of Control Methods: Strong compatibility with different control systems.
Note: This product only supports opening or closing the curtain from the middle, not from one side.
5. Specifications
| Parameter | Value |
|---|---|
| Product Name | Smart Electric Curtain |
| Max Power | 55W |
| Torsion | 1.5Nm |
| RPM | 100RPM |
| Running Speed | 128mm/s |
| Receive Frequency | 433.92MHz |
| Rated Voltage | AC100-240V |
| Operating Temperature | -10~65°C, RH<80% |
| Rated Frequency | 50/60Hz |
| Receive Sensitivity | -110dBm |
| Max Current | 0.25A |
| IP Class | IP20 |
| Model Number | ZM02-Y |
| Certification | CE |
Available Track Lengths:
| No. | Size | Track QTY (100cm) | Expansion Track (50cm) | Expansion Track (20cm) | Expansion Track (10cm) | Connector (20cm) | Connector (10cm) | Applied in |
|---|---|---|---|---|---|---|---|---|
| 1 | 315cm | 2 | 1 | 2 | 1 | 1 | 3 | 115cm~320cm |
| 2 | 515cm | 3 | 1 | 2 | 1 | 1 | 5 | 115cm~520cm |
6. Setup and Installation
The track can be assembled quickly with the following steps:
- Step 1: Assembly track. Connect the track segments as needed for your desired length.
- Step 2: Loose the latches. Release the latches on the track components.
- Step 3: Drag the buckle to sub gear box. Position the buckle correctly into the sub gear box.
- Step 4: Adjust knob. Turn the knob to secure the components.
- Step 5: Insert the latches. Secure the latches to lock the track segments. Pull the belt tightly outward, then press down the carrier lock buckle.
- Step 6: Cut the belt. Trim any excess belt, leaving approximately 2 cm.
7. Operation
7.1 APP Control
The Zemismart Smart Slide Curtain Motor supports Matter, allowing control through various Matter-certified smart home apps such as Apple Home, Amazon Alexa, Google Home, and SmartThings. Ensure you have a Matter-enabled hub (Matter Controller) to add this device to your preferred app.
7.2 Voice Control
Control your curtains using voice commands through compatible smart speakers. The motor supports Siri, Alexa, Google Home, and Bixby voice control. A corresponding voice speaker is required for this functionality.
7.3 Remote Control
The included RF remote control allows for direct operation of the curtain motor. It is powered by a CR2450 button cell (not included). The remote features:
- Indicator light: Shows remote status.
- Up/Open button: Opens the curtains.
- Stop button: Stops the curtains at their current position.
- Down/Close button: Closes the curtains.
- Set key: Used for pairing with the motor.
7.4 Power Off Manual Function
In the event of a power outage or if the motor is not connected to the power supply, the curtains can still be opened and closed manually by gently pulling them.
8. Pairing Instructions
8.1 Connecting to a Smart Home App (Matter)
To add your device to a Matter-compatible smart home app (e.g., Apple Home, Alexa, Google Home, SmartThings), you will need a Matter-compatible smart home hub (Matter Controller). Your Wi-Fi network and Matter-enabled hub must be on the same local area network (LAN).
- Reset Motor: Press the "Set key" on the motor 3 times quickly. The blue indicator light will flash rapidly, indicating it has entered pairing mode.
- Turn on WiFi: Ensure WiFi is enabled on your phone or tablet.
- Select Smart Home App: Open your preferred smart home app (e.g., Apple Home, Google Home, Amazon Alexa, SmartThings).
- Scan Matter QR Code: Follow the prompts in the app to scan the Matter QR code located on the motor.
8.2 Pairing Motor to Remote Control
These operations only work when the remote control is within the effective control distance and the motor is powered on.
- Step 1: Press the motor's "Set key" once. The motor light will flash.
- Step 2: Within 5 seconds, press the "Up key" on the remote control once.
- Step 3: The motor light will flash rapidly, indicating successful pairing.
9. Troubleshooting
- Motor not responding: Check if the motor is properly connected to power. Ensure the remote control battery is not depleted. If using app control, verify Wi-Fi connectivity and Matter hub status.
- Curtains not moving smoothly: Inspect the track for any obstructions or debris. Ensure the belt is properly tensioned and not damaged.
- Pairing issues: Make sure the motor is in pairing mode (blue light flashing rapidly). Ensure your Matter hub and phone are on the same local network. Try resetting the motor and repeating the pairing process.
- Voice control not working: Confirm that the motor is successfully paired with your smart home app and linked to the voice assistant. Check the voice assistant's settings and network connection.
- Remote control not working: Replace the CR2450 battery. Ensure you are within the effective control range of the motor.
10. User Tips
- For optimal performance and seamless integration, ensure your Matter-enabled hub is always powered on and connected to your home network.
- When using Alexa for control, ensure the track length is installed to be more than 2 meters for proper functionality.
- Regularly check the curtain track for any dust or small objects that might impede smooth operation.
- Utilize the 'Hand Light Touch-Start' feature for quick manual adjustments without needing the remote or app.
- Explore automation routines within your smart home app to schedule curtain movements based on time of day, sunrise/sunset, or other smart home triggers.
11. Maintenance
- Keep the motor and track clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Do not use abrasive cleaners or solvents, as they may damage the product.
- Periodically check the track and belt for any signs of wear or damage.
- Ensure all mounting brackets and screws are securely fastened.
12. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please contact the seller or Zemismart customer service directly. Please retain your proof of purchase for warranty claims.
13. Compliance
This device is CE certified, indicating compliance with European health, safety, and environmental protection standards.
