ZOYI ZT-N1 Smart Soldering Iron User Manual

Introduction

Thank you for choosing the ZOYI ZT-N1 Smart Soldering Iron. This high-powered, portable soldering iron features 96W power, fast heating, auto-sleep, temperature regulation, PD/QC protocol support, sleep protection, and an OLED display for efficient and precise soldering tasks. This manual provides essential information for safe and effective use.

Safety Information

• Always use the soldering iron in a well-ventilated area.
• The soldering tip can reach very high temperatures (up to 450°C / 842°F). Avoid direct contact with skin or flammable materials.
• Use appropriate personal protective equipment, such as safety glasses and heat-resistant gloves.
• Ensure the soldering iron is placed securely on its stand when not in use.
• Unplug the device when not in use or before performing any maintenance.
• Keep out of reach of children.
• Do not use the device if the power cord or soldering tip is damaged.

Package Contents

Upon opening the package, please verify that all items are present and in good condition:

• ZOYI ZT-N1 Smart Soldering Iron
• USB Type-C Cable
• Soldering Iron Stand
• Aluminum Pen Cap
• User Manual (this document)

Product Overview

The ZOYI ZT-N1 is a high-performance smart soldering iron designed for precision repair and general soldering tasks. It features an internal heating element for rapid temperature achievement and an OLED display for clear information.

Setup

1. **Unpacking**: Carefully remove all components from the packaging.
2. **Tip Installation**: Ensure the T12 soldering tip is securely inserted into the heating element. The tip is designed for easy replacement.
3. **Power Connection**: Connect the soldering iron to a compatible power source using the provided USB Type-C cable. The device supports PD (Power Delivery) and QC (Quick Charge) protocols for flexible power options, including plug-in charging or power bank charging.
4. **Placement**: Place the soldering iron on its designated stand when not actively held for soldering to prevent accidental burns or damage.

Operating Instructions

1. **Power On/Off**:
   • To turn on the device, press and hold the power button (labeled with a power symbol and "OK") for 2 seconds.
   • To turn off the device, press and hold the power button for 2 seconds again.
2. **Navigation and Adjustment**:
   • In the main interface, briefly press the power button to move the menu selection to the right.
   • In the main interface, briefly press the 'Up' or 'Down' arrow buttons to move the menu selection to the left or right, respectively.
   • In the usage or settings interface, press the 'Up' or 'Down' arrow buttons to increase or decrease the setting parameters (e.g., temperature).
   • In the usage or settings interface, briefly press the power button to confirm a selection or return to the main interface.
3. **Temperature Setting**:
   • Once powered on, the OLED display will show the current temperature and set temperature.
   • Use the 'Up' and 'Down' arrow buttons to adjust the desired soldering temperature within the range of 100°C to 450°C (212°F to 842°F).
   • The device features PID temperature control for rapid and stable heating.
4. **Auto Sleep Mode**:
   • The soldering iron is equipped with an adjustable sleep mode with automatic sensing.
   • If the device is not in use for a set period (default 5-20 minutes, adjustable), it will automatically enter sleep mode to prevent dry burning and extend tip lifespan.
   • When picked up, the device automatically heats up to the set temperature.

   

5. **Soldering**:
   • Allow the iron to reach the set temperature. The OLED display will indicate when it's ready.
   • Apply solder to the joint, touching both the component lead and the PCB pad with the hot tip.
   • Remove the solder, then remove the iron.

   

Maintenance

• **Tip Cleaning**: Regularly clean the soldering tip using a damp sponge or brass wool to remove excess solder and oxidation. This ensures efficient heat transfer and extends tip life.
• **Tip Tinning**: After cleaning and before storage, tin the tip with a small amount of fresh solder to prevent oxidation.
• **Tip Replacement**: If the soldering tip becomes worn or damaged, replace it with a new T12 compatible tip. Ensure the iron is cool and unplugged before replacing the tip.
• **Device Cleaning**: Wipe the body of the soldering iron with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• **Storage**: Store the soldering iron in a dry, safe place, preferably with the aluminum pen cap covering the tip, when not in use.

Troubleshooting

• **Iron Not Heating**:
  • Check if the power cable is securely connected to both the iron and the power source.
  • Ensure the power source (adapter or power bank) is functioning correctly and provides sufficient power (PD/QC compatible).
  • Verify the iron is powered on (hold the power button for 2 seconds).
  • If the tip is old or heavily oxidized, it might not heat efficiently. Try cleaning or replacing the tip.
• **OLED Display Not Working**:
  • Ensure the device is powered on.
  • If the display remains blank after power-on, try disconnecting and reconnecting the power. If the issue persists, contact customer support.
• **Temperature Fluctuations**:
  • Ensure the soldering tip is properly seated and making good contact with the heating element.
  • Avoid using the iron in excessively drafty environments, which can affect temperature stability.
• **Auto Sleep Not Activating/Deactivating**:
  • Check the sleep mode settings in the device menu to ensure it's enabled and the duration is set correctly.
  • Ensure the iron is placed on a stable surface when not in use for the motion sensor to detect inactivity.

Specifications

User Tips

• **Optimal Temperature**: For most common soldering tasks, a temperature between 300°C and 380°C is usually sufficient. Adjust as needed for different solder types and components.
• **Pre-tinning Wires**: Always pre-tin wires before connecting them to components or PCBs for stronger, more reliable joints.
• **Proper Ventilation**: Even with lead-free solder, fumes can be harmful. Ensure good ventilation or use a fume extractor.
• **Power Source**: For best performance, use a power adapter or power bank that supports PD (Power Delivery) or QC (Quick Charge) protocols to utilize the full 96W heating capability.
• **Portability**: The compact design makes it ideal for on-the-go repairs. Remember to use the aluminum pen cap for safe transport.

Warranty and Support

The ZOYI ZT-N1 Smart Soldering Iron is manufactured by ZOYI Electrical Measuring Instruments Store. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made.

Please refer to your purchase documentation for specific warranty terms and conditions.