1. Introduction
This NOKLEAD Digital Projection Alarm Clock (Model 3200) is designed to enhance your bedroom experience with its innovative features. It projects the time onto your ceiling, offers a customizable display, includes an FM radio, and provides convenient alarm functions with snooze and weekend modes. It also features a temperature monitor and a USB port for charging your devices.
2. Setup
2.1 Power Supply
To power on your alarm clock, connect the provided USB cable to the clock's power input port (located on the back). Plug the other end into a suitable USB power adapter (not included) or a powered USB port. The clock will automatically power on and display the time.
3. Operating Instructions
3.1 Screen Display and Brightness
- Switching Display Color (Blue/White): Long press the 'SNOOZE / LIGHT' button to toggle between blue and white display colors.
- Adjusting Screen Brightness: Short press the 'SNOOZE / LIGHT' button to cycle through 4 brightness levels: Off, Low, Medium, High.
3.2 Projection Function
- Adjusting Projection Brightness: Short press the projection button (usually located on the side or back) to adjust the projection brightness (Off-Dim-Medium-Bright).
- Rotating Projection Image: Long press the projection button to flip the projected image 180 degrees for optimal viewing on different surfaces.
3.3 Setting Time and Date
- Setting Year: Long press the 'WEEKEND' button until the year flashes. Use the '+ / -' buttons to adjust the year. Press 'WEEKEND' again to confirm.
- Setting Month/Day: After setting the year, the month/day will flash. Use the '+ / -' buttons to adjust. Press 'WEEKEND' again to confirm.
- Setting Time (Minute): Long press the '12/24' button until the time display starts flashing. Use the '+ / -' buttons to adjust the minute. Press '12/24' again to confirm.
- 12/24 Hour Format: Short press the '12/24' button to switch between 12-hour and 24-hour formats.
3.4 Setting Alarm
- Setting Alarm Time: Long press the 'ON/OFF' button until the time display starts flashing. Use the '+ / -' buttons to adjust the alarm minute. Press 'ON/OFF' again to confirm.
- Activating/Deactivating Alarm: Short press the 'ON/OFF' button to turn the alarm on or off. The bell icon will light up when the alarm is active.
- Snooze Function: When the alarm sounds, press the 'SNOOZE / LIGHT' button to activate snooze for an additional 9 minutes.
- Weekend Mode: The clock features a weekend mode where alarms will not sound on Saturdays and Sundays. Refer to the full manual for specific instructions on activating/deactivating this mode.
3.5 FM Radio
- Turning On/Off Radio: Press the 'FM/MEM' button to turn on the radio.
- Searching Stations: Use the '<< / >>' buttons to search for radio stations.
- Adjusting Volume: Use the '+ / -' buttons to adjust the volume.
- Preset Stations: The clock can save up to 15 radio stations. Consult the full manual for instructions on saving presets.
- Sleep Timer: Set the auto-off function for up to 90 minutes to fall asleep to the radio.
3.6 USB Charging Port
The clock is equipped with a USB port. Plug a charging cable into this port to power or charge mobile phones and other compatible devices.
4. Maintenance
To ensure the longevity and proper functioning of your NOKLEAD Digital Projection Alarm Clock, follow these maintenance guidelines:
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
- Keep the device away from water, excessive humidity, and extreme temperatures.
- Avoid dropping the clock or subjecting it to strong impacts.
- If the clock is not in use for an extended period, disconnect it from the power source. The built-in battery will retain time and alarm settings during power outages.
5. Troubleshooting
- No Display/Power: Ensure the USB cable is securely connected to the clock and a working power source. Check if the power adapter is functioning correctly.
- Projection Not Clear: Adjust the focus ring on the projection lens. Ensure the projection surface is within the recommended 5m/16.4ft distance.
- Alarm Not Sounding: Verify the alarm is activated (bell icon lit on the display). Check the alarm volume. Ensure weekend mode is not active if you need the alarm to sound on weekends.
- Radio Reception Poor: Extend the antenna fully. Try repositioning the clock to improve signal reception.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | NOKLEAD |
| Model Number | 3200 |
| Type | Alarm Clocks |
| Motivity Type | Digital |
| Display Type | DIGITAL |
| Screen Type | LED |
| Function | Projection |
| Features | Calendars, LUMINOVA |
| Material | Plastic |
| Style | Modern Style |
| Form | Single Face |
| Length | 191mm |
| Width | 96mm |
| Weight | 400g |
| Input | 5V 1.5A |
| Projection Distance | Up to 5m / 16.4ft |
| Radio Presets | 15 stations |
| Sleep Timer | 5-90 minutes |
| Brightness Levels | 4 levels (Off, Low, Medium, High) |
| Battery Included | No (for main operation, built-in for settings retention) |
| Is Smart Device | No |
| Origin | Mainland China |
7. User Tips
- The alarm typically defaults to a tone. If you wish to wake up to the radio, consult the full manual for specific settings, as this model primarily features a tone alarm.
- Experiment with the projection brightness and rotation to find the most comfortable viewing angle and intensity for your room.
8. Warranty and Support
For warranty information or technical support, please contact your retailer or visit the official NOKLEAD website. Keep your purchase receipt as proof of purchase.
