Feyree EV Charger Type1 User Manual

1. Introduction

Thank you for choosing the Feyree EV Charger Type1. This portable and wall-mountable EV charging station is designed to provide efficient and safe charging for your electric vehicle. It features adjustable current settings, smart app control, and multiple safety protections. This manual provides essential information for the safe and effective use of your charger.

2. Safety Information

Please read all safety instructions carefully before use to prevent injury or damage.

• RCD Protection: The charger is equipped with RCD Type B leakage protection (AC30mA + DC6mA) to ensure electrical safety.
• Multi-Protections: Features include over-voltage, under-voltage, lightning, over-current, overheat, ground, and overload protection.
• Temperature Control: An intelligent temperature control chip prevents excessive temperature during prolonged charging. The system will automatically cut off power if the temperature exceeds 85°C within 0.2 seconds. Current will be reduced if the temperature is above 70°C but below 85°C, and charging will resume automatically below 65°C.
• Current Adjustment: Always disconnect the Type1 plug from your car before adjusting the current setting.
• Power Off Before Disconnecting: Ensure the charging station is powered off before pulling out the charging plug from your vehicle.
• Environmental Conditions: The charger has an IP66 rating for water and dust resistance, making it suitable for various outdoor conditions.

3. Product Overview

The Feyree EV Charger Type1 is a versatile charging solution for electric vehicles, offering both portable and wall-mounted functionality.

Key Features:

• High-Strength Materials: Constructed with PC+ASA high-quality material (3.5mm thickness) for enhanced durability and safety.
• High Compatibility: Compatible with all electric vehicles featuring a Type1 (SAE J1772) charging port and supporting single-phase power.
• Faster Charging: Supports up to 12KW charging, providing a fast charging experience.
• 2-in-1 Design: Functions as both a portable charger and a wallbox. Includes a charging box bracket and plug holder for wall mounting.
• Real-Time Data Display: A large LCD screen displays charging status, voltage, current, temperature, and other vital information, aiding in immediate error detection.
• Long Service Life: Utilizes ePTFE Waterproof Breathable Membrane for improved heat dissipation and extended product lifespan.
• IP66 Rating: Provides excellent protection against dust and water ingress.
• Wi-Fi Smart APP: Control and monitor your charging sessions via a dedicated smartphone application.
• Premium Components: Features 99.95% pure copper cable for stable current, durable and flexible TPU insulation, 5μ silver-plated charging pins for better conductivity, and a 100% NO TIN PCB compliant with environmental standards.

4. Specifications

5. Setup

5.1 Wall-Mounted Installation

The charger comes with a charging box bracket and a charging plug holder, allowing for a convenient wall-mounted setup similar to a dedicated wallbox. Use the provided screws and anchors for secure installation.

1. Choose a suitable location for installation, ensuring it is near your vehicle's parking spot and a power outlet.
2. Mount the charging box bracket securely to the wall using the provided hardware.
3. Attach the charging plug holder to the wall at a convenient height to store the charging cable and connector when not in use.
4. Place the charger unit onto the mounted bracket.

5.2 App Connection (Wi-Fi Smart APP)

To utilize the smart features, connect your phone to the charger via the dedicated app.

1. Download the Feyree Smart APP from your device's app store.
2. For the initial connection, connect your phone to the charger's hotspot.
3. Once connected via hotspot, you can control the charger via Bluetooth within 10 meters. (Note: Requires your phone's SIM card to have a signal for initial setup/hotspot functionality).

6. Operating Instructions

6.1 Basic Charging

1. Adjust Current (if needed): If you wish to adjust the charging current (8A-50A), press the 'A' button on the charger. Ensure the Type1 plug is disconnected from your car before making adjustments.
2. Connect to Vehicle: Plug the Type1 connector into your electric vehicle's charging port.
3. Start Charging: The charger will automatically begin charging or you can initiate it via the app.
4. Monitor Charging: The LCD screen displays real-time charging data (voltage, current, temperature, etc.).
5. Stop Charging: To stop charging, press the emergency stop button on the charger or use the app. Always power off the station before disconnecting the charging plug from your vehicle.

6.2 Scheduled Charging

The charger allows you to schedule charging sessions to take advantage of off-peak electricity rates.

1. Delay Charging: Use the 'D' button or the app to delay charging from 1 to 15 hours.
2. Set Charging Time: Use the 'T' button or the app to set the duration of the charging session from 1 to 15 hours.
3. App Scheduling: The Wi-Fi Smart APP allows for advanced weekly charging plans, similar to setting an alarm clock.

6.3 Emergency Stop

In case of an emergency, press the dedicated emergency stop button on the charger to immediately halt the charging process.

7. Maintenance

• Cleaning: Regularly wipe the charger's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cable Inspection: Periodically inspect the charging cable and connector for any signs of wear, damage, or fraying. If any damage is found, discontinue use immediately and contact support.
• Storage: When not in use, store the charging cable neatly using the provided holder to prevent kinks or damage.
• Environmental Protection: The IP66 rating ensures protection against dust and water, but avoid submerging the unit or exposing it to extreme conditions beyond its operating temperature range.

8. Troubleshooting

• Error Message "err:reset": If you encounter an "err:reset" message on the screen after installation, press the main button on the wallbox to restart it. This should resolve the issue.
• Charging Not Starting:
  1. Ensure the charger is properly plugged into the power source.
  2. Verify the Type1 connector is securely plugged into your vehicle.
  3. Check the LCD screen for any error messages.
  4. If adjusting current, ensure the car side Type1 plug was disconnected during adjustment.
• App Connectivity Issues:
  1. Ensure your phone's Bluetooth is enabled and within 10 meters of the charger.
  2. For initial setup, confirm your phone's SIM card has a signal for hotspot connection.
  3. Try restarting the app and the charger.
• Overheat Protection Triggered: The charger will automatically reduce current or cut off power if it detects overheating. Ensure the charger is in a well-ventilated area and not exposed to direct sunlight during charging, especially in hot climates.
• Other Errors: The real-time data display is designed to warn of possible errors. Note any error codes or messages displayed and refer to the app or contact customer support for further assistance.

9. User Tips

• Optimize Charging Costs: Utilize the scheduled charging feature via the app to charge your EV during off-peak electricity hours, which can significantly reduce your energy costs.
• Portable Use: Take advantage of the portable design for charging at different locations, ensuring you always have a charging solution available.
• Monitor Display: Regularly check the LCD display for real-time charging information and any potential warnings to ensure optimal performance and safety.

10. Warranty and Support

The Feyree EV Charger Type1 comes with a 2-Year Warranty from the date of purchase.

For technical support, warranty claims, or any questions regarding your product, please contact Feyree customer service through the official channels provided at the point of purchase or on the Feyree official website.

Please retain your proof of purchase for warranty purposes.