1. Introduction
Thank you for choosing the MAIWO 10Gbps M.2 NVMe SSD Adapter. This compact and portable device allows you to quickly access your M.2 NVMe SSDs, offering high-speed data transfer up to 10Gbps through its USB 3.2 Gen 2 Type-C interface. Its tool-free, semi-open design ensures easy installation and efficient heat dissipation. This manual provides essential information for the proper setup, operation, and maintenance of your adapter.
2. Safety Information
- Keep the device dry and away from moisture, water, or corrosive liquids.
- Avoid exposing the device to extreme temperatures (hot or cold).
- Handle the M.2 SSD by its edges to prevent damage to components or static discharge.
- Do not attempt to disassemble or modify the adapter. Unauthorized modifications may void the warranty and pose safety risks.
- Ensure proper ventilation during operation to prevent overheating.
3. Package Contents
Please check the package for the following items:
- 1 x MAIWO M.2 NVMe SSD Adapter (Model: MAIWO-K1696) with integrated USB-C cable
Note: M.2 SSD is NOT included and must be purchased separately.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Maiwo |
| Model Number | MAIWO-K1696 |
| Item | M2 SSD Enclosure |
| External Interface | USB (Type-C) |
| Transmission Speed | 10Gbps (NVMe) |
| NVMe Model Support | NVMe PCIE M2 SSD (M Key) |
| SATA Model Support | Not supported (This model is for NVMe only) |
| Compatible SSD Size | 2230/2242/2260/2280/22110mm |
| Supporting Hard Drive Capacity | Up to 4TB |
| Case Material | Aluminum |
| Size (approx.) | 1.8" (0.47 inch height, 1.45 inch width, 6.81 inch length including cable) |
| Feature 1 | Tool Free Installation |
5. Setup
5.1 Compatibility Notes
- This specific model (MAIWO-K1696) supports M-key M.2 NVMe SSDs only.
- It is NOT compatible with NGFF SATA M.2 SSDs or mSATA SSDs.
- Ensure your M.2 NVMe SSD does not have a heatsink, as this adapter does not support SSDs with heatsinks.
- Supported M.2 NVMe SSD sizes include 2230, 2242, 2260, 2280, and 22110mm.
5.2 SSD Installation Steps (Tool-Free)
- Prepare your M.2 NVMe SSD: Ensure your SSD is compatible with the adapter (M-key NVMe, no heatsink, supported size).
- Insert the SSD: Gently slide your M.2 NVMe SSD into the adapter's slot. The semi-open design allows for easy insertion. Push until it is fully seated. No tools are required for this step.
- New SSD Partitioning (if applicable): If you are using a brand new, unused SSD, it will need to be initialized and partitioned before it can be recognized by your operating system. This process is typically done through your computer's Disk Management (Windows) or Disk Utility (Mac OS).
6. Operating Instructions
6.1 Connecting to Devices
The adapter features an integrated USB-C cable for direct connection to various devices. Simply plug the USB-C connector into a compatible port on your device.
6.2 Supported Devices and Systems
The MAIWO M.2 NVMe SSD Adapter is widely compatible with:
- Operating Systems: Windows, Mac OS, Linux, Android
- Devices: Laptops, Desktop Computers, Mobile Phones (with OTG function), Smart TVs, PS4/PS5 gaming consoles.
6.3 Data Transfer
The USB 3.2 Gen 2 Type-C interface provides a high-speed transmission rate of up to 10Gbps, allowing you to transfer large files quickly and efficiently. You can transfer a 1GB file in approximately one second.
6.4 Mobile Phone Usage
When connected to a mobile phone, the adapter supports read and write functions for your M.2 NVMe SSD, with a maximum capacity of 2TB. Please ensure your mobile phone supports the OTG (On-The-Go) function for this feature to work.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the adapter. Avoid using liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place. Its small and portable design makes it convenient to carry around, ideally in a protective pouch or case to prevent physical damage.
- Handling: Avoid dropping or subjecting the adapter to strong impacts.
8. Troubleshooting
8.1 SSD Not Recognized
- Check SSD Seating: Ensure the M.2 NVMe SSD is fully and correctly inserted into the adapter's slot.
- New SSD Partitioning: If it's a new SSD, it must be initialized and partitioned through your operating system's disk management tools (e.g., Disk Management in Windows, Disk Utility in Mac OS) before it can be used.
- Protocol Compatibility: Verify that your SSD is an M-key NVMe SSD. This adapter does not support SATA M.2 SSDs.
- Device Compatibility: Ensure your computer or mobile device supports the adapter. For mobile phones, confirm OTG functionality is enabled.
- Try Another Port/Device: Test the adapter with a different USB-C port or another compatible device to rule out port or device issues.
8.2 Slow Data Transfer Speed
- USB Port Type: Ensure the adapter is connected to a USB 3.2 Gen 2 (10Gbps) compatible port on your host device for optimal performance. Connecting to a USB 2.0 port will result in significantly lower speeds (up to 480Mbps).
- SSD Performance: The actual transfer speed is also limited by the performance of your M.2 NVMe SSD.
- System Load: High CPU usage or other background processes on your computer can affect transfer speeds.
9. User Tips
- Always safely eject the drive from your operating system before physically disconnecting the adapter to prevent data corruption.
- For maximum portability and protection, consider storing the adapter in a small, dedicated case when traveling.
- If using with a mobile phone, ensure the phone's settings have OTG (USB On-The-Go) enabled if it's not automatically detected.
10. Warranty and Support
This product comes with a 1-year warranty from the store. For any inquiries or support needs, please contact the seller directly. All emails will be answered within 24 hours.
