1. Introduction
The HelloRadio V16 PRO is an advanced multi-protocol remote control designed for RC FPV Drones, offering a rich feature set including an EDGTX system, a responsive touch screen, intelligent voice assistant, and robust safety mechanisms. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance and safety.
Figure 1.1: HelloRadio V16 PRO Remote Control and Carrying Case
2. Key Features
- Comfortable Touch Panel Experience: Intuitive 4.3-inch IPS full-color touch display (480x272 resolution).
- Enhanced Debugging & Connectivity: SWD debugging port and headphone jack conveniently located at the bottom.
- Optimized Performance: LCD circuit design frees up memory and CPU resources.
- Expandable Connectivity: Supports ESP32-C3-MINI and XIAO ESP32-C3 Bluetooth modules.
- Versatile RF Module Support: Hardware dual serial port with reverse control circuit for external RF modules.
- Customizable Controls: 6-mode switch with programmable functions and multi-color LED indicators.
- Advanced Battery Protection: Automatic overvoltage detection during charging and reverse-polarity protection.
- Integrated Motion Sensing: Equipped with 6-axis gyroscopes for future application possibilities.
- Programmable Gimbal LEDs: Customizable colorful gimbal LEDs via simple programming.
- Intelligent Voice Interaction: Customizable voice commands for human-machine interaction.
- Real-time Monitoring: Three voltage and current measurement units (±0.1% accuracy) for real-time monitoring of battery cells, charging, and overall system/RF module performance, with alarm functions.
- Durable Construction: Features metal roller and metal panels.
- Remote Control Security Guard: Integrated security features.
Figure 2.1: V16 PRO Key Features Overview
3. Specifications
Figure 3.1: EdgeTX Logo and Specifications
| Feature | Description |
|---|---|
| Dimensions | 286 x 128 x 182 mm |
| Weight | 750g (without battery) |
| Transmission Frequency | 2.400GHz - 2.480GHz |
| Transmitter Module | 4-in-1 multi-protocol internal module OR ExpressLRS internal module |
| Working Current | 450mA |
| Working Voltage | 6.6-8.4V DC |
| Radio Firmware | EdgeTX |
| Channels | More than 16 (receiver dependent) |
| Display | 4.3-inch TFT full-color touch display (480 x 272 resolution) |
| Gimbal Type | Non-contact 3D vector Hall gimbal |
| Module Bay | Compatible with micro JR bay modules (Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, TBS Tracer, etc.) |
| Upgrade Method | USB-C online / SD card offline |
| Material | Metal |
| Battery | Button Battery (not included) |
| Recommended Age | 14+ years |
4. Product Overview
Familiarize yourself with the components and controls of your HelloRadio V16 PRO.
Figure 4.1: Radio Overview and Touch Panel
Key Controls and Ports:
- Gimbals: Left and Right Gimbals for primary control.
- Trims: T1-T6 Trim Buttons for fine adjustments.
- Switches: SF, SE, SG, SA, SH (Momentary) for various functions.
- Dials/Pots: SI, S2 Dials, LS Slider Pot, RS Slider Pot.
- Buttons: SYS, RTN, PAGE<, PAGE>, TELE, Power Button, MDL Button, 6 POS Button.
- Audio: Speaker, Microphone, Earphone Jack (3.5mm).
- Connectivity: USB Data Port, TRS 3.5mm Trainer Port, Charge Port, UART Port, SD Card Slot, External Module Bay.
- Display: 4.3-inch Touchscreen.
Figure 4.2: Connectivity Ports and Ergonomic Design
5. Setup and Configuration
5.1 Initial Setup
- Battery Installation: Ensure compatible button batteries are installed correctly. The device does not include batteries.
- Power On: Press and hold the Power Button to turn on the remote control.
- Firmware Check: The V16 PRO runs on EdgeTX firmware. Check the display for firmware version.
5.2 Firmware Updates
The V16 PRO supports firmware updates via two methods:
- USB-C Online Upgrade: Connect the remote control to a computer using a USB-C cable and follow the EdgeTX update instructions.
- SD Card Offline Upgrade: Download the firmware to an SD card, insert it into the SD card slot, and follow the on-screen instructions for offline update.
5.3 Gimbal Adjustment
The Hall gimbals are adjustable. Refer to the diagram below for adjustment points. Fine-tune the gimbal tension and throw to your preference using appropriate tools.
Figure 5.1: Adjustable Hall Gimbals
5.4 External Module Bay
The external module bay is compatible with various micro JR bay modules. Insert your desired module (e.g., Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, TBS Tracer) into the bay and configure it through the EdgeTX system settings.
6. Operation
6.1 Motion Control
The remote control is equipped with a 3-axis accelerometer and 3-axis gyroscope. With future EdgeTX software updates, this hardware enables advanced functions such as motion control and radio attitude perception.
Figure 6.1: Motion Control Gyroscope Diagram
6.2 Intelligent Voice Assistant
The V16 PRO features an AI voice recognition unit for human-machine interaction through customized voice entries. To activate, say "Hello Radio" to the remote control. The voice assistant will recognize and respond to subsequent control commands. If no valid voice is detected within 8 seconds, it enters sleep mode.
Example Voice Commands:
Figure 6.2: AI Voice Assistant Commands
6.3 Programmable Gimbal LED
The gimbal features a 16-color LED circle. These LEDs can be programmed using a simple Lua program to customize their colors and patterns, allowing for visual indication of flight modes or personal preference.
Figure 6.3: Programmable Gimbal LED Examples
7. Safety Features
The HelloRadio V16 PRO incorporates several safety features to protect the device and ensure reliable operation:
- Reverse-Polarity Protection: Prevents damage from incorrect power supply connection.
- Circuit Protection: Safeguards internal components from electrical faults.
- Module Protection: Ensures external RF modules operate safely.
- Voltage Auto-Calibration: Automatically calibrates voltage readings for accuracy.
- Battery Overvoltage Protection: The charging circuit automatically stops charging if overvoltage is detected in battery cells.
- Real-time Voltage & Current Monitoring: Three independent measurement units monitor the voltage of individual battery cells, charging voltage/current, and overall system/RF module working voltage/current in real-time. The system will alarm or shut down if abnormal voltage or current is detected.
Figure 7.1: Radio Safeguard Features
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the remote control. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the remote control in its protective case in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: While the device has built-in battery protection, always use recommended charging practices. Do not leave batteries charging unattended for extended periods.
- Firmware Updates: Regularly check for and install the latest EdgeTX firmware updates to ensure optimal performance, new features, and bug fixes.
- Gimbal Inspection: Periodically check gimbals for smooth operation and any signs of wear.
9. Troubleshooting
9.1 Power Issues
- Remote control does not power on: Ensure batteries are correctly installed and charged. Check for any physical damage to the battery compartment or power button.
- Short battery life: Ensure batteries are fully charged. Consider replacing old batteries if performance degrades significantly.
9.2 Connection Issues
- No signal to receiver: Verify that the internal or external RF module is correctly installed and configured. Ensure the receiver is properly bound to the transmitter. Check antenna connection.
- Intermittent signal: Ensure no obstructions are between the transmitter and receiver. Check for local interference.
9.3 Display Issues
- Touchscreen unresponsive: Gently clean the screen. If the issue persists, a firmware reflash might be necessary.
- Screen flickering or distorted: Ensure firmware is up to date. Contact support if the problem continues.
9.4 Gimbal Problems
- Gimbals not centered or erratic: Perform a gimbal calibration through the EdgeTX system menu. Check for any physical debris obstructing gimbal movement.
10. User Tips
- Leverage Programmable LEDs: Assign different LED colors to various flight modes for quick visual identification during operation.
- Customize Voice Commands: Personalize your voice assistant commands to suit your workflow and preferences for a more intuitive control experience.
- Stay Updated: Regularly visit the official EdgeTX website for the latest firmware releases and community support to unlock new features and improve performance.
- Backup Settings: Before any major firmware update or configuration change, always back up your model settings to the SD card.
11. Warranty and Support
For detailed warranty information, please refer to the manufacturer's official website or the documentation provided at the time of purchase. If you encounter any issues not covered in this manual or require technical assistance, please contact the manufacturer's customer support.
