LEKATO Tank-G

Contents

LEKATO Tank-G Multi Effects Guitar Pedal User Manual

Model: Tank-G | Brand: LEKATO

1. Introduction

The LEKATO Tank-G is a versatile multi-effects guitar pedal designed to elevate your guitar playing experience. It integrates 36 editable presets and 4 modules, including Amp, Chorus, Delay, Reverb, IR CAB, Tuner, Bluetooth connectivity, and music recording capabilities. This manual provides essential information for safe and effective use of your Tank-G pedal.

2. Safety Information

General Safety Advisory

Always assume potential hazards are present until proper safety verification is completed. Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.

Essential Precautions

  • Assess the Environment: Look for and identify potential dangers such as electrical sources and trip hazards.
  • Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves) as required for specific tasks or environments.
  • Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
  • Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required

  • STOP if you are uncertain about the safety of any action.
  • CONSULT the relevant official safety manuals or qualified personnel for guidance.
  • DO NOT PROCEED without proper authorization and training for hazardous tasks.

Cautions

  • Do not disassemble or repair this product yourself. Refer all servicing to qualified service personnel.
  • Do not use or store it near heat sources, in damp or dusty areas. Avoid violent vibrations or shock.
  • Do not drop this product; it may malfunction.
  • Do not use alcohol or other cleaning fluids to clean this product. Clean only with a dry cloth.
  • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  • Unplug this apparatus during lightning storms or when unused for long periods of time.
  • The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
  • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  • Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.

Correct Disposal of this Product

This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). Mishandling of this type of waste could have a negative impact on the environment and human health due to potentially hazardous substances. For more information, contact your local city office or household waste collection service.

3. Product Overview

The LEKATO Tank-G is an all-in-one guitar effects processor designed for both live performance and studio recording. It features a compact design with intuitive controls and a robust set of effects.

Key Features:

  • 36 Presets: Factory presets and user-editable slots.
  • 9 Effect Modules: NOISE GATE, 9 AMP models, 3 MOD effects (Chorus, Phaser, Tremolo), 3 DELAY effects (Analog, Tape, Dual), 3 REVERB effects (Room, Spring, Cloud), 8 IR CAB simulations.
  • Tone Editing & Save: Customize and save your preferred tones.
  • App Control: Edit, exchange, share, import, export presets, and manage IRs via PC or phone app.
  • Rich Interfaces: Headphone jack, Audio Output & Phone Recording, USB (Charge/Data/PC Recording), XLR Output.
  • Bluetooth Connection: Play backing tracks wirelessly.
  • Long Working Time: Built-in 3000mAh battery provides up to 12 hours of playtime.
  • Compact & Portable: Ideal for practice, travel, and gigs.

Component Identification

Angled top view of the LEKATO Tank-G pedal, highlighting the controls and footswitches.
Figure 3.1: Top view of the LEKATO Tank-G Multi Effects Guitar Pedal with controls and footswitches labeled.
Top and rear view of the LEKATO Tank-G pedal, showing input/output jacks and power switch.
Figure 3.2: Rear panel of the LEKATO Tank-G pedal showing input/output ports and power switch.
Effectors Chain Diagram showing signal flow and connections.
Figure 3.3: Effectors Chain Diagram illustrating the signal flow through the pedal's modules and external connections.

4. Setup

4.1 Initial Charging

Before first use, ensure the pedal is fully charged. Connect the pedal to a 5V USB power source using the provided USB cable. The built-in 3000mAh lithium battery provides up to 12 hours of playtime when fully charged.

Image indicating 12 hours playtime with a 3000mAh battery.
Figure 4.1: The pedal features a 3000mAh battery for extended playtime.

4.2 Connecting Your Instrument and Amplifier

Use standard 1/4-inch instrument cables to connect your guitar to the MONO Input jack and your amplifier or audio interface to the MONO Output jack.

4.3 Headphone Connection

For silent practice, connect your headphones to the 3.5mm Earphone jack.

Person using headphones connected to the pedal while playing guitar.
Figure 4.2: Using the 3.5mm headphone jack for private practice.

4.4 USB Connection

The USB port serves multiple functions:

  • Charging: Connect to a 5V power adapter for charging.
  • Data Transmission: Transfer data to/from a computer.
  • PC Recording: Use the pedal as an external sound card for recording to your computer.
Diagram of the pedal's rich interfaces: MONO Input, AUX IN PHONE RECORD, Earphone, MONO Output, Charge 5V Data Trans Record (USB).
Figure 4.3: Overview of the pedal's various input and output interfaces.

4.5 Bluetooth Connection

To connect via Bluetooth for backing tracks:

  1. Turn on the pedal.
  2. Press and hold the footswitch labeled 'BT' (usually indicated by a symbol or text near the footswitch).
  3. On your smartphone or Bluetooth device, search for available devices and select

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.