1. Introduction
Congratulations on your purchase of the LYZRC L200 Pro MAX Drone. This professional-grade quadcopter is equipped with advanced features for an exceptional flight and photography experience. It boasts a 4K HD camera, 2-axis gimbal stabilization, GPS positioning, 5G WiFi FPV, and intelligent 360° laser obstacle avoidance.
Please note that the L200 Pro MAX model includes the obstacle avoidance device, while the L200 Pro model does not. This manual primarily focuses on the L200 Pro MAX features.
2. Safety Guidelines
⚠️ Important Safety Information:
- This product is intended for recreational use only.
- Illegal modification of drones/planes is strictly prohibited.
- Always adhere to the relevant laws and regulations regarding drone usage in your country or region to ensure legal operation.
- Maintain a clear line of sight with your drone during flight.
- Avoid flying near people, animals, or private property.
- Check weather conditions before flying; avoid strong winds or rain.
- Ensure the drone's battery and remote control battery are fully charged before each flight.
3. Package Contents
Verify that all items listed below are included in your package:

| Item | Quantity |
|---|---|
| Unmanned Aerial Vehicle (Drone) | 1 |
| Remote Controller | 1 |
| Mobile Phone Clip | 1 |
| Obstacle Avoider (for L200 Pro MAX) | 1 (optional) |
| Lens Cap | 1 |
| Body Battery (7.4V/1600mAh) | 1 (one battery included in the drone) |
| USB Charging Cable | 1 |
| Screwdriver | 1 |
| Spare Propeller Blades | 8 |
| Spare Screws | 8 |
| Instruction Manual | 1 |
| Receiving Bag | 1 |
4. Specifications
Below are the detailed technical specifications for the LYZRC L200 Pro MAX Drone:

| Feature | Specification (L200 Pro MAX) |
|---|---|
| Drone Model | L200 PRO MAX |
| Obstacle Avoidance Types | GPS-Based Avoidance, 360° Laser (25M range) |
| Motor Type | 1503 Brushless Motor |
| Camera Stabilization | Gimbal Image Stabilizer, Electronic Image Stabilization (EIS 2-Axis) |
| Video Maximum Resolution | 4K (4096*2160) |
| Front Camera Photo Resolution | 3840*2160P |
| Front Camera Video Resolution | 2660*1440P (SD Card) |
| Bottom Camera Photo Resolution | 1280*720P |
| Bottom Camera Video Resolution | 1280*720P |
| Video Format | MP4 |
| Frame Rate | 30 fps (60*fps) |
| Aircraft Operating Frequency | 2.4 GHz |
| Frequency | 5G |
| Max Flight Time | 25 minutes |
| Drone Battery Capacity | 7.4V/1600mAh Lithium Battery |
| Drone Weight | 216g (with battery) |
| Obstacle Avoidance Device Weight | 23.8g |
| Remote Control Distance | About 3000 Meters (No Interference, No Occlusion) |
| Image Transmission Distance | 1200 Meters (No Interference, No Occlusion) / 2.7km |
| Max Flight Altitude | 120M |
| Remote Control Battery | 3.7V/300mAh Lithium Battery |
| Control Channels | 4 channels |
| Gyro | 6-Axis |
| GPS | Yes |
| Optical Zoom | 50x |
| Sensor Size | 1/6.0 inches, 2/3 inches |
| Connectivity | APP Controller, Remote Control, WiFi |
| Recommended Age | 14+ |
| Integrated Propeller Guard | Included |
| Max Wind Speed Resistance | < 10 KM/H |
| Max Takeoff Weight | <1kg |
| Removable/Replaceable Battery | Yes |
| Built-in Display | No |
| Strobe | Yes |
| Spotlight | Yes |
| Loudspeaker | No |
| RTK Module | No |
| APP Supported Languages | English |
| Sensing Type | Complete Omnidirectional |
| Aerial Photography | Yes |
| Certification | CE |
| Unfolded Size | 260*220*85MM (26x22x8.5cm) |
| Folded Size | 130*75*85MM (13x7.5x8.5cm) |
| Motor Power | 9W |
| Electric Power Adjustment | 10A |
| Electric Adjustment Camera Angle | 80° |
| Camera Wide Angle | 100° |
5. Setup Guide
5.1. Charging the Batteries
Before first use, fully charge both the drone's body battery and the remote control battery.
- Drone Battery: Insert the 7.4V/1600mAh lithium battery into the drone. Connect the drone to the USB charging cable and plug it into a suitable USB power source. Charging time is approximately 4 hours.
- Remote Control Battery: The remote control has a built-in 3.7V/300mAh lithium battery. Connect the remote control to a USB power source using its charging port.
5.2. Propeller Installation
Attach the propellers to the drone's motors. Ensure that the correct propellers (marked A and B) are installed on the corresponding motor arms as indicated in the drone's manual or markings. Use the provided screwdriver and spare screws if needed.
5.3. Attaching the Obstacle Avoidance Device (L200 Pro MAX only)
If you have the L200 Pro MAX model, attach the 360° laser obstacle avoidance device to the designated slot on top of the drone. Ensure it is securely fastened.

5.4. App Installation
Download the official control application for your drone. The app is available on both the App Store (for iOS devices) and Google Play (for Android devices).

5.5. Pairing the Drone and Remote Control
Follow the instructions in the quick start guide (included in the package) to pair your drone with the remote control and connect to the app via WiFi.
6. Remote Control Overview
Familiarize yourself with the remote control layout and functions:

- Roller: Adjusts Camera Angle.
- Short press (Camera Button): Takes a photo.
- Long press (Camera Button): Starts/stops video recording.
- Speed Switch / Long press (Obstacle Avoidance Button): Toggles flight speed. Long press to switch the obstacle avoidance function on/off (off by default).
- Power Switch: Turns the remote control on/off.
- Left Joystick: Controls drone's ascent/descent and rotation (yaw).
- Right Joystick: Controls drone's forward/backward and left/right movement (pitch and roll).
- One-Click Return Button: Initiates automatic return to the takeoff point.
- Short press (GPS Switch): Activates headless mode.
- Long press (GPS Switch): Initiates one-touch take-off and landing.
- Turnaround Indicator: Shows drone's orientation.
- Power Indicator: Displays remote control battery level.
- Charging Indicator: Shows charging status.
- GPS Indicator: Displays GPS signal status.
7. Operating Instructions
7.1. Basic Flight
- Power On: Place the drone on a flat surface. Power on the drone, then power on the remote control.
- Calibration: Follow the app's instructions for geomagnetic calibration if prompted.
- Take-off: Long press the GPS Switch button for one-touch take-off, or use the joysticks for manual take-off.
- Landing: Long press the GPS Switch button for one-touch landing, or use the joysticks for manual landing.
7.2. Camera Operation
- Photo/Video: Use the dedicated camera button on the remote control (short press for photo, long press for video).
- Gesture Recognition: Within 1-3 meters of the aircraft, make a photo gesture (V-sign) or camera gesture (open palm) in front of the camera to trigger a photo or video recording.
- Camera Angle Adjustment: Use the roller on the remote control to adjust the camera's vertical angle (Horizontal 40°, Vertical 120°).
- Optical Zoom: The camera supports 50x optical zoom for detailed shots.



7.3. Intelligent Flight Modes
The L200 Pro MAX offers several intelligent flight modes for enhanced control and creative shots:
- GPS+Optical Flow Dual Mode: Accurately realizes hover mode of altitude and position for wind resistance and aerial stability.
- 360° Laser Obstacle Avoidance: The L200 Pro MAX is equipped with intelligent automatic obstacle avoidance, detecting obstacles within 25 meters in front, rear, left, and right directions, ensuring safer flight.
- GPS Intelligent Tracking: The drone will automatically follow a designated subject.
- Image Following: Identifies the shooting object and performs automatic following flight.
- Route Multi-Point Planning Flight: Plan a flight path on the app, and the aircraft will fly independently according to the pre-set route, allowing you to focus on shooting.
- Fixed Point Surround: Select a center point, then use the joystick to set the desired surround radius. The drone will orbit the point.
- GPS Positioning Return: The flight position is recorded in real-time through GPS. Intelligent return functions include one-click return to takeoff point, low battery return, and no signal return.
- Aircraft Retrieval Function: Continuously click on the GPS signal icon 3 times in the app to open the map interface, which displays the final distance, longitude, and latitude position of the aircraft.
- 5G Real-time High-Definition Image Transmission: Experience excellent image transmission quality with 5G technology, providing a clear FPV feed to your smartphone.





7.4. App Interface Analysis
The drone's companion app provides a comprehensive interface for flight control, camera settings, and intelligent features. Refer to the app interface diagram for a detailed overview:

7.5. Sharing Photos and Videos
Pictures can be shared with music and videos. You can choose to share photos with one or more options, and videos can only be shared individually at a time.

8. Maintenance
8.1. Battery Care
- Always fully charge batteries before use.
- Do not overcharge or over-discharge the batteries.
- Store batteries at approximately 50-60% charge if not used for extended periods.
- Avoid exposing batteries to extreme temperatures.

8.2. Cleaning
- Wipe the drone body and camera lens with a soft, dry cloth.
- Do not use harsh chemicals or solvents.
- Ensure no dust or debris obstructs the camera or sensors.
8.3. Propeller Inspection
- Before each flight, inspect all propellers for any signs of damage (cracks, bends, chips).
- Replace damaged propellers immediately using the provided spare blades and screwdriver.
9. Troubleshooting
- Drone not responding: Ensure both drone and remote control are powered on and fully charged. Re-pair if necessary.
- Poor image transmission: Check WiFi connection between your smartphone and the drone. Ensure no strong interference sources are nearby.
- Drone drifts during flight: Perform geomagnetic calibration as instructed in the app. Check for strong winds.
- Lost signal / Low battery: The drone is designed to automatically return to the takeoff point in these situations. If it doesn't, use the aircraft retrieval function in the app (click GPS signal icon 3 times) to locate its last known position.
- Obstacle avoidance not working: Ensure the obstacle avoidance device is correctly attached and enabled (long press the speed switch button on the remote).
- Flying multiple drones: While the remote operates on 2.4GHz, flying multiple drones in close proximity might lead to signal interference. It's generally recommended to fly one drone at a time or maintain significant distance between them to avoid signal crossing.
10. User Tips
- SD Card: The drone supports 32-128G SD cards. If your package did not include a 64G card, you will need to prepare your own for recording high-resolution video and photos.
- Model Differences: Remember that the L200 Pro MAX includes the 360° laser obstacle avoidance device, while the L200 Pro does not. Ensure you are aware of the features specific to your purchased model.
- Wind Resistance: The drone features strong wind resistance. However, for optimal flight stability and safety, always check local wind conditions before flying and avoid excessively windy environments.
- Pre-Flight Check: Always perform a quick pre-flight check of propellers, battery levels, and surroundings before launching.
11. Warranty and Support
For any technical issues, warranty claims, or further assistance, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.