Roborock A10 UltraE/A10 Ultra

Contents

Roborock 2-in-1 Crevice and Flat Vacuum Cleaner Attachment User Manual

Model: A10 UltraE/A10 Ultra (Compatible with various Roborock and Xiaomi models)

1. Product Overview

This 2-in-1 attachment is designed to enhance the cleaning capabilities of your compatible Roborock or Xiaomi vacuum cleaner. It combines a crevice tool and a long flat brush, allowing for versatile cleaning in tight spaces, corners, and delicate surfaces.

Roborock 2-in-1 Crevice and Flat Vacuum Cleaner Attachment

Figure 1: Roborock 2-in-1 Crevice and Flat Vacuum Cleaner Attachment (Overall View)

2. Setup and Installation

Follow these steps to attach the 2-in-1 tool to your vacuum cleaner:

  1. Ensure your vacuum cleaner is turned off and unplugged (if applicable) before attaching or detaching accessories.
  2. Locate the accessory port on your vacuum cleaner.
  3. Align the attachment's connector with the vacuum cleaner's port. The attachment features a red release button, indicating the connection mechanism.
  4. Push the attachment firmly into the port until it clicks securely into place. You may need to press the red button during insertion or removal.
  5. To remove, press the red release button and pull the attachment away from the vacuum cleaner.
Side view of the attachment showing the red release button

Figure 2: Side view of the attachment, highlighting the red release button for secure connection.

3. Operating Instructions

This 2-in-1 tool offers two primary cleaning functions:

3.1. Crevice Tool Mode

Use this mode for reaching into narrow gaps and tight spaces. The pointed end is ideal for:

  • Between sofa cushions
  • Along baseboards and wall edges
  • Inside car interiors
  • Around radiators and vents
Crevice tool mode of the attachment

Figure 3: The attachment configured as a crevice tool.

3.2. Flat Brush Mode

Engage the brush for cleaning delicate surfaces or to agitate stubborn dirt. The brush is suitable for:

  • Upholstery and curtains
  • Keyboards and electronics (ensure vacuum is on low suction)
  • Dusting shelves and intricate objects
  • Carpeted stairs (for light cleaning)

To switch between modes, the brush component can be slid or rotated into position, as indicated by the design. The images show the brush integrated into the flat nozzle, suggesting it can be extended or retracted.

Flat brush mode of the attachment

Figure 4: The attachment showing the integrated brush for flat surface cleaning.

4. Maintenance

Regular maintenance ensures optimal performance and extends the life of your attachment.

  • Cleaning the Nozzle: After each use, inspect the nozzle for any trapped debris, lint, or hair. Remove any obstructions manually.
  • Cleaning the Brush: If using the brush mode, periodically remove any tangled hair or fibers from the bristles. A small pair of scissors can be used carefully to cut through tangled material.
  • Washing: The attachment can be rinsed under lukewarm water. Ensure it is completely dry before reattaching it to the vacuum cleaner or storing it. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the attachment in a clean, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your 2-in-1 attachment, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Poor suction through the attachment
  • Attachment not securely connected
  • Blockage in the nozzle or vacuum hose
  • Vacuum cleaner dustbin is full or filter is clogged
  • Ensure the attachment is firmly clicked into place.
  • Inspect the attachment and vacuum hose for any obstructions and remove them.
  • Empty the vacuum cleaner's dustbin and clean/replace the filter as per your vacuum's manual.
Brush not effective
  • Bristles are matted or dirty
  • Brush is not fully extended/engaged
  • Clean the brush bristles as described in the Maintenance section.
  • Ensure the brush mechanism is correctly positioned for use.

6. Specifications

FeatureDetail
Product TypeVacuum Cleaner Parts (2-in-1 Crevice and Flat Brush)
BrandRoborock
Model NumberA10 UltraE/A10 Ultra (Attachment for these models)
Compatible Vacuum ModelsRoborock A10 UltraE, A10 Ultra, H6, H6 Mace plus, H7, H7 plus, H7 Pure, Mace plu, Xiaomi SCWXCQ01R
MaterialPlastic
Vacuum Part TypeBRUSHES (includes crevice function)
OriginMainland China
Approximate Package Dimensions (L x W x H)10 cm x 10 cm x 10 cm
Approximate Package Weight0.2 kg

7. Warranty and Support

This product is covered by the standard warranty provided by the seller. For specific warranty terms, please refer to your purchase documentation or contact the seller directly.

  • Free Returns: Enjoy free returns within 90 days of purchase. Please check the seller's return policy for details.
  • Customer Support: For any questions, technical assistance, or warranty claims, please contact the "roborock-xiaomi Store" through the platform where you made your purchase.
  • Security & Privacy: Your personal details are protected and not shared with third parties without consent.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.