1. Introduction
Thank you for choosing the Baseus Bowie MZ10 True Wireless Earphones. These earphones are designed to provide a superior audio experience with advanced features such as Active Noise Cancellation (ANC), a 4-mic Environmental Noise Cancellation (ENC) system for clear calls, and ultra-low latency for gaming. This manual will guide you through the setup, operation, and maintenance of your new earphones.
2. Package Contents
Please check the package for the following items:
- Baseus Bowie MZ10 True Wireless Earphones (Left and Right)
- Charging Case
- USB-C Charging Cable
- Multiple sizes of Ear Tips

3. Product Overview
The Baseus Bowie MZ10 earphones feature an in-ear design with advanced audio technology for comfort and performance.

Key Features:
- Wireless 5.2: For a faster transmission rate and improved anti-interference.
- 4-mic ENC System: Filters out background noise for clear calls.
- 0.06s Ultra-Low Latency (DCLL): Provides perfect audio-visual synchronization, especially for gaming.
- Active Noise Reduction (ANC): Up to 25dB noise reduction using reverse sound waves.
- 10mm Composite Diaphragm: Delivers deep bass and clear vocals.
- Baseus Smart-Connect: Seamlessly switch between two paired devices.
- Baseus Rapid Charge (BRC): Fast charging technology.
- In-ear Detection: Automatically plays/pauses audio when earphones are inserted/removed.
- Hall Switch: Auto-connects to the device when the charging case lid is opened (after initial pairing).



4. Setup
4.1 Initial Charging
Before first use, fully charge the earphones and the charging case. Connect the USB-C charging cable to the charging port on the case and a power source. The charging case supports Baseus Rapid Charge (BRC) technology for quick charging.

4.2 Pairing with a Device
- Open the lid of the charging case. The earphones will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "Baseus Bowie MZ10" in the list of available Bluetooth devices and select it to connect.
- Once paired, the earphones will automatically connect to your device when you open the charging case lid.

4.3 Baseus App Installation
For enhanced features and customization, download the official Baseus App. Scan the QR code provided in the original user manual or search for "Baseus" in your device's app store. Ensure Bluetooth and GPS are enabled on your phone when pairing with the app.

5. Operating Instructions
5.1 Touch Controls
The earphones feature touch-sensitive areas for various functions. Refer to the diagram below for specific gestures:

- Play/Pause: Single tap (L or R) or put on/remove earbuds.
- Previous Track: Tap & Hold 1.5s (L).
- Next Track: Tap & Hold 1.5s (R).
- Decline Call: Tap & Hold 1.5s (L or R).
- Answer/Hangup Call: Single tap (L or R).
- Voice Assistant: Double tap (L or R).
- Noise Cancellation Cycle: Double tap (L or R) to cycle through Noise Cancellation (default) > Normal > Transparency.
5.2 Noise Control Modes
The Baseus Bowie MZ10 offers different modes to control ambient sound:
- Noise Reduction Mode: Filters out external sounds like keyboard noise and fan noise.
- Transparency Mode: Allows you to hear your surroundings clearly while wearing the earphones.
- Normal Mode: Standard audio playback without active noise cancellation or transparency.

5.3 Baseus Smart-Connect
This technology allows you to connect your earphones to two Bluetooth devices simultaneously and seamlessly switch between them. For example, you can be connected to your laptop for music and automatically switch to your phone when a call comes in.

5.4 Baseus App Functions
The Baseus App unlocks additional features:
- Low-latency gaming (On/Off): Optimize for gaming performance.
- Real-time display of battery: Check battery levels of earphones and charging case.
- Location maps: Search for an earphone if lost (requires Bluetooth and GPS).
- Button customization: Customize your own control commands.
- Adaptive EQ tuning: Choose from 12 sound effects.
- Spatial effects: Switch between Normal, Music Mode, and Theater Mode.
- Noise cancellation level customization: Choose between 3 presets or 1-10 personal presets.
6. Maintenance
- Keep the earphones and charging case clean and dry.
- Use a soft, dry cloth to wipe the surfaces. Do not use harsh chemicals or abrasive materials.
- Clean the ear tips regularly with a damp cloth and mild soap, then dry thoroughly before reattaching.
- Avoid extreme temperatures and direct sunlight.
- Store the earphones in their charging case when not in use to protect them and keep them charged.
7. Troubleshooting
- Earphones not pairing or connecting:
- Ensure both earphones are in the charging case and the lid is open. Check if Bluetooth is enabled on your device. Try forgetting the device in your Bluetooth settings and re-pairing. Ensure earphones are charged.
- Only one earphone working:
- Place both earphones back into the charging case, close the lid, wait a few seconds, then open it again. This often re-syncs them. Check battery levels for both earphones.
- Poor sound quality or dropped connection:
- Ensure your device is within the 10m communication range. Check for interference from other wireless devices. Try restarting your device and re-pairing the earphones.
- Active Noise Cancellation not effective:
- Ensure the ear tips provide a good seal in your ear canal. Try different sized ear tips for a better fit. Ensure ANC mode is activated via touch control or the Baseus App.
- Earphones not charging:
- Check if the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earphones and inside the case are clean and free of debris. Try a different charging cable or power adapter.
8. Specifications
| Feature | Specification |
|---|---|
| Model No. | Baseus Bowie MZ10 |
| Name | Baseus True Wireless Earphones |
| Color | White/Black |
| Material | ABS+PC |
| Weight | ≈40.8g |
| Bluetooth Version | V5.2 |
| Communication Distance | 10m |
| Playtime (Earphones) | 4.5 hours (at 70% volume) |
| Battery Capacity (Earphones) | 35 mAh / 0.135 Wh |
| Battery Capacity (Charging Case) | 400 mAh / 1.48 Wh |
| Charge Interface | Type-C |
| Charging Time | About 1.5 hours |
| Total Playtime (with case) | 20 hours |
| Frequency Response Range | 20Hz-20kHz |
| Active Noise Cancellation | Up to 25dB |
| Environmental Noise Cancellation | 4-mic system |
| Low Latency | 0.06s (DCLL Technology) |
| Product Code (Black) | NGTW340001 |
| Product Code (White) | NGTW340102 |


9. User Tips
- Optimize for Gaming: If you're a gamer, remember to activate the 0.06s ultra-low latency mode via the Baseus App for the best audio-visual sync.
- Customize Your Sound: Experiment with the 12 adaptive EQ tuning options in the Baseus App to find your preferred sound profile.
- Seamless Device Switching: Take advantage of Baseus Smart-Connect to effortlessly switch between your phone and other devices without manual re-pairing.
- Find Your Fit: Use the included ear tips to find the best fit for your ears. A good seal is crucial for optimal sound quality and effective noise cancellation.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Baseus website or contact your retailer. Keep your proof of purchase for any warranty claims.