Introduction
Thank you for choosing the Baseus Car Inverter. This device converts your vehicle's 12V DC power into 220V AC power, along with USB and Type-C outputs, allowing you to power and charge various electronic devices on the go. Please read this manual carefully before use to ensure safe and optimal performance.

Image: Baseus 150W Car Inverter with digital display showing input voltage.
Setup and Installation
- Connecting to Vehicle Power:
For models up to 150W, connect the inverter directly to your car's cigarette lighter socket. For higher wattage models (e.g., 300W or 500W), it is recommended to connect directly to the car battery using the provided battery clamp cables for optimal performance and to avoid overloading the cigarette lighter circuit. Ensure the connection is secure to prevent accidental disconnections. - Initial Power-On:
Once connected, the inverter's digital display will show the current input voltage. - AC Output Activation:
To use the AC power outlets, you must long-press the independent switch button on the side of the inverter until the AC indicator light turns on. This protects your equipment and car battery. - USB and Type-C Output:
The USB and Type-C ports are active once the inverter is connected to the cigarette lighter or battery, without needing to activate the AC switch.

Image: Independent switch for AC power supply, requiring a long press to activate.

Image: Intelligent Digital Display showing normal voltage ranges (11.6V-14.8V after start-up, 11.6V-12.8V before started) and low voltage warning (Below 11.6V).
Video: Product demonstration showing connection and use in a car, charging various devices.
Operation
The Baseus Car Inverter offers multiple output ports to meet your charging needs:
- AC Port: Provides up to 150W (or 300W/500W depending on model) of AC power for devices like laptops, small printers, and car refrigerators. Remember to activate the AC output via the side switch.
- USB Port: Delivers up to 30W for fast charging compatible USB devices.
- Type-C Port: Delivers up to 30W for fast charging compatible Type-C devices.
- Simultaneous USB + Type-C Output: When both USB and Type-C ports are used simultaneously, the combined output is up to 25W.
The inverter features an intelligent control chip that automatically identifies the required voltage for different devices, ensuring safe and efficient charging.

Image: The inverter's 2 AC outlets, USB, and Type-C ports simultaneously charging a laptop, smartphone, and earbuds.
Compatible Devices
The inverter is designed to power a wide range of devices. Refer to the table below for general compatibility and power limits:

Image: Compatibility chart showing devices supported by cigarette lighter (<=150W) and battery clamp (<=300W) connections. Examples include laptops, mobile phones, tablets, drones, car refrigerators, speakers, small electric rice cookers, and electric lunch boxes.
Devices Not Supported
Avoid connecting high-power appliances that exceed the inverter's wattage or are listed as unsupported. These include, but are not limited to:
- Electric rice cookers
- Microwave ovens
- Hair dryers
- Electric kettles
- Heating equipment
- Washing machines
- Household air conditioning units
Maintenance
To ensure the longevity and optimal performance of your Baseus Car Inverter, follow these maintenance guidelines:
- Cleaning: Keep the inverter clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Ventilation: Ensure the inverter's ventilation openings are not blocked. The built-in powerful fan requires clear airflow for effective heat dissipation.
- Storage: When not in use, store the inverter in a cool, dry place away from direct sunlight and extreme temperatures.
- Connection Check: Periodically check all connections (cigarette lighter or battery clamps) to ensure they are secure and free from corrosion.

Image: Close-up of the inverter's powerful fan, illustrating airflow for heat dissipation.
Troubleshooting
If you encounter issues with your inverter, refer to the following common problems and solutions:
- Inverter Not Powering On / No Output:
- Check the car's 12V power source (cigarette lighter or battery). Ensure the car engine is running for stable power.
- Verify the inverter's connection is secure. Loose connections can prevent operation.
- For AC output, ensure you have long-pressed the side switch until the AC indicator is on.
- Check the car battery voltage on the inverter's digital display. If it's below 11.6V (low voltage), the inverter may not operate or may shut down to protect the battery. Start the car engine to increase voltage.
- Device Not Charging / Power Cut Off:
- Ensure the device's power requirement does not exceed the inverter's output capacity (e.g., 150W for AC, 30W for USB/Type-C).
- Some high-power devices (e.g., 166W laptop) might cause the inverter to cut off power after extended use if the inverter's internal components are stressed. Consider using a higher wattage inverter model (e.g., 300W or 500W) for such devices, especially if connected directly to the car battery.
- Verify that the device is compatible with the inverter's output type (AC, USB, Type-C).
- Cigarette Lighter Connection Feels Loose:
- Ensure the cigarette lighter plug is fully inserted and securely seated in the car's socket.
- Avoid excessive movement of the inverter or connected cables that could dislodge the plug.
Specifications
| Feature | Detail |
|---|---|
| Input Voltage | DC 12V |
| Output Voltage | AC 220V±10% (EU Version) |
| AC Port Output | 150W Max (Model dependent: 300W, 500W options available) |
| USB Port Output | 30W Max |
| Type-C Port Output | 30W Max |
| USB + Type-C Simultaneous Output | 25W Max |
| Socket Type | Europe (Other versions available for US/JP) |
| Certifications | CE, FCC, RoHS, UL, pse |
| Dimensions (L x W x H) | 21 cm x 19 cm x 5 cm |
| Weight | 0.882 kg |

Image: Detailed comparison table of 150W, 300W, and 500W inverter models, outlining power, waveform, input voltage, and applicable devices.
Safety Protections
The inverter is equipped with 9 safety protections to ensure safe operation:
- Overcharge Protection
- Short-circuit Protection
- Shutdown Protection
- Overload Protection
- Overvoltage Protection
- Undervoltage Protection
- Protection Against Electric Shock
- High Temperature Protection
- Impact Protection

Image: Icons illustrating the 9 safety protections integrated into the inverter.

Image: Display of international certifications including CE, FCC, RoHS, UL, and pse.
User Tips
- For optimal performance with higher wattage devices, consider models above 150W and connect them directly to your car battery using battery clamps, rather than the cigarette lighter.
- Ensure all connections are firm and secure to prevent interruptions in power supply.
- The inverter works well for charging laptops and devices via USB-C fast charging, making it ideal for road trips.
- Always check the power requirements of your devices against the inverter's output capacity to avoid overloading.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.