Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GMAIPOP 1080P WiFi Dual Camera Dash Cam. Please read this manual thoroughly before using the product to ensure proper function and safety.
Important Safety Information
- SD Card Insertion: The SD card can only be inserted from one direction. Ensure the correct orientation as shown in the figure before insertion.
- Battery & Charger: The built-in 150mAh battery is for maintaining settings only. The dash cam requires constant power from the car charger or USB. Always use the original car charger to prevent faults or incompatibility.
- High Temperature Cautions: Avoid leaving the product in temperatures exceeding 70°C (160°F) for extended periods. If using a sunshade, do not place the dash cam between the windshield and sunshade to prevent heat buildup and potential damage.
- Reset Procedure: If the dash cam freezes, gets stuck, or encounters a format error, use a tool to press the reset hole.
Product Overview
The GMAIPOP 1080P WiFi Dual Camera Dash Cam features a compact design with a front and interior camera, a display screen, and various control buttons and ports.


Components and Ports

- Power/OK Button
- Down Button (>)
- Up Button (<)
- Menu Button (M)
- RESET Hole
- AV-IN Port
- TF Card Slot
- Mini USB Power Interface
Setup
1. SD Card Insertion
Locate the TF Card Slot (7) on the dash cam. Insert a Class 10 or higher micro SD card (up to 64GB, not included) into the slot. Ensure the card is oriented correctly as shown in the product overview images. The card should click into place.
2. Dash Cam Installation
Step 1: Install Electrostatic Film
- Clean the windshield glass thoroughly using the provided accessories. It is crucial for the glass to be clean to ensure the bracket adheres properly.
- Peel off the cover marked "1" in red from the electrostatic film.
- Apply the electrostatic film to the desired location on your windshield.

Step 2: Install the Bracket
- After installing the electrostatic film, peel off the cover marked "2" in green.
- Remove the film from the bracket cover.
- Attach the bracket to the electrostatic film.
Step 3: Connect Car Charger and Wire Cable
Connect the car charger to the camera's Mini USB Power Interface (8). Route the cable according to one of the wiring diagrams below. Always use the original car charger to avoid compatibility issues.

Important Note: If your vehicle has side curtain airbags, exercise extreme caution when routing cables along your vehicle windows. Ensure cables do not interfere with airbag deployment.
Step 4: Install the Car Charger's Cable
- Hide the cable into the top panel of your car.
- Carefully break the side panel slightly and insert the cable. Be cautious if there is an airbag present.
- Insert the cable along the door's sealing tape.
- Connect the car charger to the cigarette lighter socket.

Ensure the cigarette lighter socket is clean for connection. Check if the car charger's red indicator light is on after connection.
Operation
Button Functions
| Button | Function |
|---|---|
| Power/OK | Long-Press (2-3s) to Turn ON/OFF the Camera. Short-Press once to Start/Stop video recording, Play/Pause current video in Playback Status, or Enter/Save settings in Menu. |
| Down (>) | Short-Press to scroll DOWN in Menu, switch display windows (front/cabin camera) in recording status, or scroll to next video files in Playback Status. Long-Press to turn on/off Dash Cam WiFi. |
| Up (<) | Short-Press to scroll UP in Menu, or mute Audio Recording. Long-Press to enter file management. |
| Menu (M) | Long-Press in NON-Recording Status to enter/exit Menu. Short-Press in Recording Status to lock the current video file. |
WiFi & App Usage
The dash cam features built-in WiFi for easy control and footage management via a smartphone app.
Step 1: Download the App
Search for "Viidure" in the Google Play Store or Apple App Store and download the free application.

Step 2: Turn on the Dash Cam's WiFi
There are two methods to activate WiFi:
- Method 1: Long-Press the UP (<) button while the dash cam is in working status.
- Method 2: Long-Press the MENU (M) button to enter the menu, then use the UP/DOWN buttons to find the "WiFi&APP" option and turn it on.
Step 3: Connect to WiFi
- On your mobile phone, go to WiFi settings.
- Search for the WiFi network named "D50******" (the exact name will be displayed on the dash cam screen).
- Enter the default password: 12345678.
Note: Ensure your phone is connecting via "WLAN" (WiFi) and not Bluetooth.
Step 4: Operate the App
Once connected, open the Viidure app to control the dash cam. You can view real-time footage, download recorded videos, take photos, and adjust various settings. When the dash cam is connected to the app via WiFi, its physical buttons cannot be operated.

Key Features and Functions
- Loop Recording: The dash cam automatically records in a loop, overwriting the oldest unlocked videos when the memory card is full. Supports Class 10 or higher micro SD cards.
- G-Sensor: In the event of a collision, the built-in G-sensor detects the impact and automatically locks the current video file, preventing it from being overwritten.
- 24-Hour Parking Monitor: When enabled (requires a hardwire kit, not included), the parking monitor continuously monitors your vehicle for sudden shakes or collisions while parked, automatically recording incidents.
- Night Vision: Equipped with industry-leading Night Vision and WDR technology, the dash cam enhances clarity in low-light conditions, ensuring clear footage day or night.
- Wide Angle: The front camera offers a 170° wide angle, covering three lanes simultaneously, while the inside camera provides a 140° view.
- Full HD 1080P Recording: Records high-quality video at 1080P resolution, capturing crystal clear details.



Video Playback
You can playback recorded videos using three methods:
- On a PC: Remove the SD card from the dash cam and insert it into a card reader connected to your computer. You can then view the video files directly.
- Via WiFi & App: Connect your smartphone to the dash cam's WiFi using the "Viidure" app. You can then view and download videos in real-time.
- On the Dash Cam:
- Long-press the DOWN (>) button to enter playback mode.
- Use the UP (<) and DOWN (>) buttons to scroll through and select video files.
- Long-press the MENU (M) button to delete or protect the current file.
- Short-press the DOWN (>) button to exit playback mode.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the dash cam's lens and screen. Avoid using abrasive cleaners or solvents.
- Temperature: Store and operate the dash cam within the specified working temperature range (-20°C to 65°C) to ensure longevity.
- SD Card: Regularly format your SD card (at least once a month) to maintain optimal recording performance and prevent data corruption. Back up important footage before formatting.
Troubleshooting
Common Issues and Solutions
- Dash Cam Freezes or Gets Stuck: Use a tool to press the RESET hole to restart the device.
- Format Error: If you encounter a format error, try resetting the device. If the issue persists, try formatting the SD card on a computer or replacing it.
- WiFi Keeps Disconnecting:
- Check your phone's settings to ensure it allows connections to the dash cam's WiFi.
- Some phones have "auto WiFi" features that may disconnect from the dash cam's network if it doesn't provide internet access (e.g., wireless CarPlay). Try disabling such features.
- Solution: Forget the dash cam's WiFi network on your phone and reconnect. Ensure your phone's WiFi settings are configured correctly. If there's a strong auto WiFi network, temporarily turn it off when using the dash cam's WiFi.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | GMAIPOP |
| Item Type | Car DVR |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | Generalplus |
| Frames Per Second | 30 |
| Camera Resolution | 1920x1080 |
| Video Code | H.264 |
| Video Format | AVI, MP4 |
| Number Of Lenses | 2 |
| Max External Memory | 64G |
| Memory Card Required Reading Speed | Class 10 |
| Imaging Sensor | Sony IMX307 |
| Pixels | 800Mega |
| View Angle | 150° |
| Aperture | F2.0 |
| Display Size | 3"-5" (IPS) |
| Built-in Screen | Yes |
| Touch Screen | No |
| Screen Ratio | 16:9 |
| Battery | Built-in (Lithium Battery-Polymer) |
| Is Batteries Included | Yes |
| Power Mode | Car Plug |
| Operating Voltage | ≤36V |
| Working Temperature | -20°C to 65°C |
| Special Features | G-Sensor, Motion Detection, SD/MMC Card, Anti Vibration, Real Time Surveillance, WiFi Function, Parking Monitor, NightShot Function, Loop-Cycle Recording Feature, Audio Recorded |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), English, French, German, Russia, Spanish |
| Weight | 0.4Kg |
| Cable Length | 6M |
| Certification | CE, FCC |

Warranty & Support
The GMAIPOP 1080P WiFi Dual Camera Dash Cam comes with a 1-year warranty. For further assistance or detailed information, please refer to the official user manual PDF available at User Manual (PDF).
User Tips
- WiFi Connection: If you have trouble connecting to WiFi, ensure you are searching for the network named "D50******" and using the password "12345678". Also, check your phone settings for any auto-disconnect features that might interfere.
- Recording Duration: The recording duration depends on the size of your SD card and the recording quality. A 64GB card will provide a significant amount of footage before loop recording overwrites older files.