FLYSKY FS-SR12

Contents

FLYSKY FS-SR12 2.4G Receiver Instruction Manual

Model: FS-SR12

Brand: FLYSKY

1. Introduction

The FLYSKY FS-SR12 is a 12-channel 2.4G receiver designed for a wide array of RC models, including fixed-wing aircraft, helicopters, gliders, delta-wing airplanes, multicopters, construction vehicles, boats, robots, and cars. It operates using the ANT protocol and is equipped with dual antennas to ensure stable and robust signal reception. This receiver also integrates a 3-axis gyroscope and a 3-axis accelerometer sensor, alongside a basic Black-Box function, providing advanced control and data logging capabilities for enhanced model performance and analysis.

2. Product Overview

FLYSKY FS-SR12 Receiver with labels for ports and features
Figure 1: Front view of the FS-SR12 receiver, showing LED, SERVO, SENS, BVD/VCC, BIND, and PWM channels 1-12. Also highlights built-in 3-axis gyroscope and accelerometer, and Black-Box function.

The FS-SR12 receiver features a compact design for easy installation and user-friendly operation. Its key attributes include:

  • 12 PWM Channels: Provides extensive control options for various functions.
  • Dual Antennas: Ensures stable and strong signal reception, effective over distances greater than 1500m (air distance without interference).
  • Multiple Signal Outputs: Supports PWM, PPM, i-BUS, and S.BUS for broad compatibility with different devices and flight controllers.
  • Integrated Sensors: Features a built-in 3-axis gyroscope and 3-axis accelerometer for enhanced stability, attitude detection, and control.
  • Black-Box Function: Offers basic data logging capabilities for performance review.
  • ANT Protocol: Designed for compatibility with FLYSKY transmitters that use the ANT protocol, such as the FS-ST8.
Top-down view of FLYSKY FS-SR12 receiver showing port labels
Figure 2: Detailed top view of the FS-SR12 receiver, indicating the LED, SERVO, SENS, BVD/VCC, BIND button, and PWM output channels (1-12).

3. Setup and Installation

3.1. Connecting the Receiver

Refer to Figure 2 for a detailed identification of the ports on your FS-SR12 receiver:

  • LED: Status indicator light.
  • SERVO: PWM output ports for channels 2 through 12.
  • SENS: Dedicated sensor port.
  • BVD/VCC: Port for Battery Voltage Detection and main power input.
  • BIND: Button used to initiate the binding process with a transmitter.
  • S+-PPM/1: Multi-function port for Channel 1 PWM output or PPM signal output.

Connect your servos, Electronic Speed Controllers (ESCs), and other compatible devices to the appropriate PWM channels (2-12) and the S+-PPM/1 port for Channel 1 or PPM output. Always ensure correct polarity when connecting power and servos to prevent damage.

3.2. Power Supply

The FS-SR12 receiver requires an input power within the range of 3.5V to 9V DC. Verify that your power source, such as a Battery Eliminator Circuit (BEC) from an ESC or a dedicated receiver battery, supplies voltage strictly within this specified range.

3.3. Antenna Placement

FLYSKY FS-SR12 receiver with dual antennas extended
Figure 3: The FS-SR12 receiver with its dual antennas, illustrating optimal positioning for stable signal reception.

For optimal signal stability and range, the two antennas of the FS-SR12 should be positioned at a 90-degree angle to each other. Ensure they are mounted away from any carbon fiber, metal, or other conductive materials that could potentially shield or interfere with the radio signal. Avoid sharply bending or damaging the antennas during installation.

3.4. Binding Process

To establish a secure communication link between your FS-SR12 receiver and a compatible ANT protocol transmitter (e.g., FLYSKY FS-ST8), follow these steps:

  1. Place your transmitter into binding mode. Consult your specific transmitter's instruction manual for detailed steps on how to activate binding mode.
  2. While holding down the BIND button on the FS-SR12 receiver, power on the receiver.
  3. Observe the LED indicator on the receiver. It will typically flash rapidly during the binding process and then turn solid once a successful connection is established.
  4. Once the LED indicates a successful bind, release the BIND button. Power off and then power on both the receiver and the transmitter.
  5. After restarting, verify that the receiver is responding correctly to all control inputs from your transmitter.

4. Operation

4.1. Signal Output Modes

The FS-SR12 receiver offers versatility with multiple signal output types:

  • PWM (Pulse Width Modulation): Provides direct, individual control for servos connected to channels 1-12.
  • PPM (Pulse Position Modulation): A single wire carries all channel data, commonly used for connecting to flight controllers.
  • i-BUS: FLYSKY's proprietary serial bus protocol, offering a streamlined connection for multiple channels.
  • S.BUS: Futaba's widely adopted serial bus protocol, also used for connecting to flight controllers and other compatible devices with a single wire.

The desired output mode is typically configured through your compatible FLYSKY transmitter's settings or via the flight controller's software. Refer to your transmitter's manual for specific instructions on how to select and configure these output modes.

4.2. Integrated Sensors and Black-Box Function

The receiver's built-in 3-axis gyroscope and 3-axis accelerometer provide real-time data on the model's attitude and motion. This sensor data can be utilized by compatible flight controllers for advanced stabilization and flight control. Additionally, the basic Black-Box function allows for recording and later analysis of flight data, which can be invaluable for tuning and troubleshooting. Consult your flight controller's documentation for details on integrating and utilizing this sensor data.

4.3. Online Update

The FS-SR12 receiver supports online firmware updates, allowing you to keep your device current with the latest features, improvements, and bug fixes. Visit the official FLYSKY website for information on available firmware updates and detailed instructions on how to perform the update process.

5. Maintenance

Adhering to these maintenance guidelines will help ensure the long-term reliability and optimal performance of your FS-SR12 receiver:

  • Environmental Conditions: Always operate and store the receiver within its specified temperature range of -10℃ to +60℃ and humidity range of 20% to 95%. Avoid exposing the device to extreme temperatures, high humidity, or rapid temperature changes.
  • Cleaning: Keep the receiver clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Never use solvents, harsh chemicals, or abrasive materials, as these can damage the casing or internal components.
  • Physical Protection: Protect the receiver from physical shocks, impacts, and excessive vibrations. Ensure it is securely mounted within your model to prevent movement during operation.
  • Antenna Care: Regularly inspect both antennas for any signs of damage, such as kinks, cuts, or fraying. Damaged antennas can severely degrade signal range and reliability, potentially leading to loss of control. Replace damaged antennas immediately.

6. Troubleshooting

No Signal / Intermittent Signal:
  • Verify that the receiver is correctly bound to your transmitter. If unsure, re-perform the binding process as described in Section 3.4.
  • Ensure both the transmitter and receiver are powered on and within the effective operating range.
  • Inspect the antenna placement and condition. Confirm they are positioned correctly (90-degree angle, away from obstructions) and are not damaged.
  • Check that the input power to the receiver is stable and within the specified 3.5V-9V DC range.
  • Identify and eliminate potential sources of 2.4GHz interference in your operating environment (e.g., Wi-Fi routers, other RC systems).
Servos Not Responding:
  • Confirm that all servos are correctly plugged into their respective PWM channels with the correct polarity.
  • Check the signal output mode (PWM, PPM, i-BUS, S.BUS) configured on your transmitter and ensure it matches your receiver and flight controller setup.
  • Verify that your transmitter is sending control commands and is not in a failsafe or hold mode.
  • Ensure the servos themselves are functional by testing them independently if possible.
Receiver LED Status:

The LED on the receiver provides visual feedback on its operational status. Consult your FLYSKY transmitter's manual or the receiver's specific documentation for a detailed explanation of LED indications (e.g., solid light for a successful bind, rapid flashing for binding mode, slow flashing for no signal, off for no power).

7. Specifications

Feature Detail
Product Name FS-SR12
Compatible Transmitters Adapts transmitters with ANT protocol (e.g., FS-ST8)
Compatible Models Fixed-wing aircraft, helicopters, gliders, delta-wing airplanes, multicopters, construction vehicles, boats, robots, cars
PWM Channels 12
RF 2.4GHz ISM
Maximum Power < 20dBm (e.i.r.p.) (EU)
2.4G Protocol ANT
Resolution 4096
Antenna Two antennas
Distance > 1500m (Air distance without interference)
Input Power 3.5~9V/DC
Working Current 70mA/5V
Data Output PWM/PPM/i-BUS/S.BUS
Online Update Yes
Temperature Range -10℃ ~ +60℃
Humidity Range 20% ~ 95%
Dimensions 44.8*32*11.3mm
Weight 13g

8. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. For optimal performance and compatibility, always ensure your receiver's firmware is kept up to date.

9. Warranty and Support

For detailed warranty information, technical assistance, or service inquiries regarding your FLYSKY FS-SR12 receiver, please contact the manufacturer, FLYSKY, directly or reach out to your authorized dealer. It is recommended to retain your proof of purchase for any potential warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.