MN Model MN168

Contents

MN168 1:12 Full Scale RC Car Instruction Manual

Model: MN168

1. Introduction

Thank you for purchasing the MN168 1:12 Full Scale RC Car. This remote control vehicle is designed for off-road enthusiasts, featuring 4WD, proportional control, and a durable design. Please read this manual thoroughly before operating the product to ensure safe and optimal performance.

2. Safety Information

  • WARNING: Not suitable for children under 36 months due to small parts. Adult supervision is required for all users, especially children.
  • Battery Safety:
    • The 7.4V 1200mAh Lithium Battery must be charged with the standard charger provided.
    • Always use the battery under adult supervision.
    • Turn off or remove the battery from the RC car when not in use to prevent discharge or damage.
    • Do not short-circuit, disassemble, or expose batteries to extreme temperatures.
  • Keep hands, hair, and loose clothing away from moving parts (wheels, motor).
  • Do not operate the RC car in public streets, near people, or in wet conditions unless specified as waterproof.
  • Avoid operating in extreme weather conditions (heavy rain, snow, strong winds).
Battery warning label for 7.4V 1200mAh battery
Figure 2.1: Battery Warning Label

3. Package Contents

Ensure all items are present in the package:

  • 1 x MN168 RC Car
  • 1 x 2.4G Remote Control
  • 1 x USB Charger
  • 1 x 7.4V 1200mAh Lithium Battery (pre-installed or separate)
  • Sticker Sheet (for customization)
MN168 RC Car, remote control, battery, and stickers
Figure 3.1: Package Contents Overview

4. Specifications

FeatureDetail
Model NumberMN-168
Scale1:12
MaterialABS, Metal, Plastic
Product Dimensions (L x W x H)36.7 x 16 x 17.5 cm
Body Battery7.4V 1200mAh Lithium Battery
Charging Voltage5V
Charging TimeApprox. 3 hours
Motor280 Motor
Servo17g Waterproof Servo
Remote Control2.4G Full-ratio Proportional Control
Remote Control Battery2 x 1.5V AA Batteries (not included)
Play TimeApprox. 30-40 minutes
Remote Control DistanceApprox. 100 meters
State of AssemblyReady-to-Go
FeaturesFront lights, Rear lights, Turn signals, Proportional control, Low speed linearity, Fine steering control, Waterproof treatment (servo), Metal adjustable shock absorbers, New portal axle structure, Sealed tires.
Ground Clearance3.5 cm (portal axle), 5.5 cm (chassis)
Approach Angle70°
Departure Angle47°
Wheelbase21.5 cm
Available ColorsBlue, Yellow, Deep Blue
Package Weight2.1 kg
Package Dimensions46 x 22 x 25 cm
Product data table and remote control diagram
Figure 4.1: Product Data and Remote Control Layout
RC car dimensions including approach and departure angles
Figure 4.2: RC Car Dimensions and Angles

5. Setup

5.1. Charging the Body Battery

  1. Connect the provided USB charger to a compatible USB power source (e.g., computer USB port, USB wall adapter).
  2. Connect the 7.4V 1200mAh Lithium Battery to the USB charger.
  3. The charging indicator on the USB charger will show the charging status (refer to charger's specific light indications).
  4. Charging typically takes approximately 3 hours. Do not overcharge.

5.2. Installing the Body Battery

  1. Open the engine hood of the RC car to access the battery compartment.
  2. Carefully insert the charged 7.4V 1200mAh Lithium Battery into the compartment.
  3. Connect the battery connector to the car's power connector.
  4. Close the engine hood securely.
Accessing the battery compartment under the hood
Figure 5.1: Battery Installation in RC Car

5.3. Installing Remote Control Batteries

  1. Locate the battery compartment on the bottom of the remote control.
  2. Open the battery cover.
  3. Insert 2 x 1.5V AA batteries, ensuring correct polarity (+/-).
  4. Close the battery cover.

5.4. Power On and Pairing

  1. Turn on the RC car using its power switch.
  2. Turn on the remote control using its power switch.
  3. The remote control and RC car should automatically pair. An indicator light on the remote control will confirm successful pairing.

6. Operating Instructions

6.1. Remote Control Functions

Refer to Figure 4.1 for the layout of the remote control.

  • Proportional Throttle: Control forward and backward speed by pulling or pushing the trigger.
  • Proportional Steering: Control left and right turns by rotating the steering wheel.
  • Speed Fast/Slow Switch: Adjust the overall speed limit of the car.
  • Steering Fine-tuning: Adjust the steering trim to ensure the car drives straight when the steering wheel is centered.
  • Light Control: Toggle the headlights and other lights on/off.
  • Remote Control Light: Indicator for remote control status.

6.2. Driving Tips

  • The MN168 is designed for off-road performance, capable of handling various terrains like rocks, gravel, sand, puddles, and mud.
  • Utilize the proportional throttle and steering for precise control, especially in challenging environments.
  • The car features a 70° approach angle and 47° departure angle, along with 3.5cm portal axle ground clearance, allowing it to climb over obstacles effectively.
  • The super soft tires with realistic texture provide enhanced grip for off-road climbing.
  • The controllable headlights and linkage turn signals add to the realistic driving experience.
RC car driving on various terrains
Figure 6.1: MN168 on Diverse Terrains
RC car with headlights and turn signals activated
Figure 6.2: Functional Lights

7. Maintenance

7.1. General Cleaning

  • After each use, especially in dirty or dusty conditions, clean the RC car with a soft brush or cloth.
  • Avoid using water directly on electronic components, although the servo is waterproof.
  • Ensure no debris is lodged in the wheels, suspension, or chassis.

7.2. Battery Care

  • Always disconnect the battery from the car when not in use.
  • Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not store fully charged or fully discharged batteries for extended periods. Aim for a storage charge of around 50%.

7.3. Tire and Wheel Maintenance

  • The tires are sealed to prevent water/mud ingress, reducing maintenance.
  • Check tire pressure and tread for wear and tear. Replace if necessary.
  • Ensure anti-loosening nuts are secure to prevent tires from falling off.
Diagram showing the sealed tire structure
Figure 7.1: Sealed Tire Structure

7.4. Chassis and Electronics

  • The independent ESC/receiver unit has undergone waterproof treatment, but avoid full submersion.
  • Regularly inspect the chassis, motor, and servo for any loose connections or damage.
  • The metal adjustable shock absorbers can be tuned for optimal performance.
Diagram of the MN168 chassis structure
Figure 7.2: Chassis Structure Overview
Detailed view of the independent ESC/receiver, motor, and servo
Figure 7.3: Electronic Components

8. Troubleshooting

  • Car not responding:
    • Check if both the car and remote control are powered on.
    • Ensure the car's battery is charged and correctly connected.
    • Replace the batteries in the remote control.
    • Re-pair the remote control and car.
  • Car drives crooked:
    • Use the steering fine-tuning knob on the remote control to adjust the steering trim.
    • Check for any obstructions or damage to the steering mechanism.
  • Short play time:
    • Ensure the battery is fully charged before use.
    • Battery performance can decrease over time; consider replacing the battery if it's old or damaged.
  • Loss of range or interference:
    • Avoid operating near other 2.4Ghz devices or strong electromagnetic interference sources.
    • Ensure the remote control batteries are fresh.

9. User Tips

No specific user tips from reviews or Q&A were available at the time of manual creation. However, general tips for RC car enthusiasts include:

  • Experiment with different terrains to discover the MN168's full capabilities.
  • Consider purchasing additional batteries for extended play sessions.
  • Regularly check and tighten screws, especially after rough off-road use.
  • Explore optional accessories like roof racks or recovery boards to enhance the scale realism and functionality.
RC car with optional outdoor equipment and accessories
Figure 9.1: Optional Accessories for Enhanced Play

10. Warranty and Support

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

© 2023 MN Model. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.