Magnetic Charging Cable for Smartwatches

Introduction

This manual provides instructions for the safe and effective use of your new magnetic charging cable. This universal cable is designed for children's smartwatches that utilize a 7.62mm magnetic charging interface, available in both 2-pin and 4-pin configurations. Please read this manual thoroughly before use.

Product Overview

The magnetic charging cable features a standard USB-A connector on one end and a magnetic pogo pin connector on the other. The magnetic connector is designed to securely attach to your smartwatch's charging port, ensuring a stable connection for efficient charging.

Setup Instructions

1. Verify Compatibility: Before connecting, ensure your smartwatch requires a magnetic charging cable with a 7.62mm pin spacing. This cable supports both 2-pin and 4-pin configurations. Refer to your smartwatch's original manual for exact specifications.
2. Connect to Power Source: Insert the USB-A end of the charging cable into a compatible USB power adapter (e.g., a wall charger, computer USB port, or power bank). Ensure the power source provides stable power.
3. Attach to Smartwatch: Align the magnetic connector of the cable with the charging contacts on your smartwatch. The magnets will help snap the connector into place. Ensure the pins on the cable align correctly with the contacts on the watch.
4. Confirm Charging: Once connected, your smartwatch should indicate that it is charging (e.g., a battery icon or charging animation on the screen).

Operating Instructions

The charging cable operates automatically once connected correctly. Simply plug the USB end into a power source and attach the magnetic end to your smartwatch. The device will begin charging. Monitor your smartwatch's display for charging status. Charging times may vary depending on your smartwatch model and battery capacity.

Maintenance

• Keep Clean: Regularly inspect the magnetic pins and charging contacts on your smartwatch for dust, dirt, or debris. Use a soft, dry cloth or cotton swab to gently clean them.
• Keep Dry: Avoid exposing the cable and connectors to moisture. If they become wet, ensure they are completely dry before use.
• Handle with Care: Do not bend, twist, or pull the cable excessively, especially near the connectors, to prevent internal damage.
• Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures.

Troubleshooting

• Smartwatch is not charging:
  • Ensure the USB-A connector is fully inserted into a working power source.
  • Check that the magnetic connector is securely attached and properly aligned with the charging contacts on your smartwatch. The magnets should hold it firmly.
  • Verify that the pin spacing (7.62mm) and pin count (2-pin or 4-pin) of the cable match your smartwatch's requirements. This cable is universal only for devices with the same charging distance and pin configuration.
  • Clean the charging pins on both the cable and the smartwatch to remove any obstructions.
  • Try a different USB power source or USB port.
• Slow charging:
  • Ensure your USB power source provides adequate output (e.g., 5V/1A).
  • Avoid charging through unpowered USB hubs or very long extension cables, which can reduce power delivery.

Specifications

User Tips

• Always Double-Check Compatibility: The term "universal" for this cable refers to its ability to work with various devices that share the exact 7.62mm pin spacing and either 2-pin or 4-pin configuration. It does not mean it will charge all smartwatches. Always confirm your watch's specific charging requirements.
• Optimal Connection: Ensure the magnetic connector snaps firmly into place without any gaps. A loose connection can prevent charging or lead to intermittent power.

Warranty and Support

For any issues or questions regarding your magnetic charging cable, please contact the seller or retailer from whom you purchased the product. They will be able to provide assistance and information regarding warranty claims or technical support.