1. Introduction
The DAKWIT TK600 is a powerful, compact, and versatile GPS locator designed for real-time tracking of vehicles, pets, children, and personal items. Featuring a 1500mAh battery for extended standby, strong magnetic adsorption for easy installation, and a suite of advanced tracking and alarm functions, the TK600 provides reliable location monitoring and security.
2. Product Features
- Real-time Tracking: Continuous monitoring of location.
- Multiple Positioning Technologies: Utilizes GPS and AGPS for fast and accurate positioning, even in blind spots with data upload.
- Long Standby Battery: Equipped with a 1500mAh battery, offering up to 30 days of standby time.
- Smart Positioning Modes: Switch between power-saving and real-time tracking modes as needed.
- Strong Magnetic Adsorption: Allows for free and easy installation without complex wiring.
- Comprehensive Alarm Functions: Includes speeding, low power, movement, Geo-fence (entry/exit), vibration, anti-demolition, and anti-collision alarms.
- APP GPRS Commands: Configure device settings and send commands directly via the mobile application, eliminating the need for SMS commands.
- Waterproof and Dustproof Design: Ensures durability and reliable performance in various environments.
- Built-in Storage Memory: Stores location data when out of GSM signal range and uploads it once connectivity is restored.
- SOS Alarm: For emergency situations.
3. Specifications
| Feature | Specification |
|---|---|
| Model Name | TK600 |
| GPS Type | GPS Tracker |
| GPS Module | Yes |
| Item Size | 6.4 x 4.6 x 1.7 cm |
| GPS Chip | UBLOX chip |
| Number of Channels | 20 channels in parallel |
| Sensitivity | -159dBm |
| Accuracy | 5 meters |
| Positioning Time (Cold Start) | 35 seconds |
| Positioning Time (Hot Start) | 1 second |
| Battery Capacity | 1500mAh |
| Standby Time | Up to 30 days |
| Environmental Protection | Waterproof and Dustproof |
| Installation | Strong Magnetic Adsorption (Free Installation) |
4. Package Contents
Upon opening your DAKWIT TK600 package, please ensure all items are present and in good condition:
- DAKWIT TK600 GPS Tracker
- USB Charging Cable
- User Manual (this document)
5. Setup Instructions
5.1 Initial Charging
Before first use, fully charge the TK600 tracker for more than 6 hours using the provided USB cable and a compatible charger. Ensure the device is powered off during charging.
5.2 SIM Card Preparation and Insertion
The TK600 requires a GSM mobile phone card (not included) for GPRS data transmission and communication. Please ensure the SIM card meets the following requirements:
- It must support calling, text messaging, and GPRS internet access.
- Ensure there is sufficient balance on the SIM card.
- Caller ID must be enabled.
- Call forwarding must be turned off.
Carefully insert the prepared GSM mobile phone card into the designated SIM card slot on the tracker. Refer to the device diagram for the correct orientation.
5.3 APP Download and Installation
To manage and track your device, download the "dagps" application on your smartphone:
- Scan the QR code provided in Figure 4 using your phone's camera or a QR code scanner app.
- Open the link in your browser.
- Choose the appropriate version for your device (Android or iPhone).
- Download and install the application.
- For iOS users, you can also search for "dagps" directly in the App Store and install it.
5.4 Device Placement
The DAKWIT TK600 features strong magnetic adsorption, allowing for flexible and easy installation without permanent fixtures. For optimal GPS signal reception, place the device in an area with a clear view of the sky. Common placement locations include:
- Underneath a vehicle (ensure it's securely attached to a metal surface).
- Inside a backpack or luggage.
- Attached to a pet's collar (if suitable for the pet's size and comfort).
6. Operating Instructions
6.1 Powering On/Off
Specific power on/off instructions are not detailed in the provided information. Typically, GPS trackers have a power button or power on automatically upon SIM card insertion and charging. Please refer to the device itself for any physical buttons or indicators.
6.2 Real-time Tracking
Once the device is powered on and connected to the network, open the "dagps" application on your smartphone. You can view the real-time location of your tracker on the map interface. The device utilizes both GPS and AGPS for fast and accurate positioning.
6.3 Positioning Modes
The TK600 supports various positioning modes to optimize battery life and tracking frequency:
- Roll-call Positioning: In this power-saving mode, the device remains on standby. You can manually trigger a location update via the APP to get the current position.
- Continuous Positioning: For constant monitoring, the device will continuously report its location. This mode consumes more battery.
You can switch between these modes at any time through the "dagps" application settings. The device is designed to be online even when static, allowing the APP to activate positioning.
6.4 Setting Alarms
The "dagps" APP allows you to configure various alarms:
- Low Battery Alarm: Receive notifications when the device's battery is low.
- Movement Alarm: Get alerts if the device moves from a stationary position.
- Geo-fence Alarm: Set virtual boundaries on the map. Receive alerts when the device enters or exits these predefined areas.
- Vibration Alarm: Notifies you if the device detects significant vibration.
- Anti-demolition/Anti-collision Alarm: Alerts for tampering or impact.
- SOS Alarm: If configured, pressing the SOS button (if present) will send an emergency alert to pre-set contacts.
All alarm settings and notifications are managed through the "dagps" application.
7. Maintenance
- Charging: Always use the original USB cable and a compatible charger to prevent damage to the device and battery.
- Cleaning: Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Disassembly: Do not attempt to disassemble or modify the device. Unauthorized disassembly will void the warranty and may cause damage.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No GPS signal / Inaccurate positioning | Device is indoors or in an area with poor satellite reception (e.g., dense urban areas, underground). | Move the device to an open outdoor area with a clear view of the sky. GPS signals are only available outdoors. |
| Device not reporting location / No communication | SIM card issues (no call/SMS/GPRS, insufficient balance, caller ID disabled, call forwarding enabled). |
|
| Unexpected positioning behavior (e.g., not continuous when expected) | Incorrect positioning mode selected. | Check the "dagps" APP settings. "Time sleep" is a single positioning mode, while "vibration sleep" and "shutdown sleep" are continuous positioning modes. Adjust as needed. |
| Device not turning on | Low battery or charging issue. | Charge the device for at least 6 hours. Ensure the charger and cable are working correctly. |
9. User Tips
- Optimal Signal: For the best GPS accuracy, always try to place the tracker in a location with an unobstructed view of the sky.
- Battery Management: Utilize the power-saving "Roll-call Positioning" mode when continuous real-time tracking is not critical to extend battery life.
- SIM Card Monitoring: Regularly check your SIM card's data and balance to ensure uninterrupted tracking service.
- Geo-fence for Safety: Set up Geo-fences around important areas (e.g., home, school, workplace) to receive immediate alerts if the tracker enters or leaves these zones.
10. Warranty and Support
The DAKWIT TK600 GPS Tracker is designed for reliability and performance. For any technical issues, warranty claims, or support inquiries, please contact the seller or manufacturer directly through your purchase platform. Please have your purchase details and product model (TK600) ready when contacting support.
