4G GPS Tracker T3 User Manual

Preface

Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specifications and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

1. Summary

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

2. Main functions

• GSM quad-band frequency;
• Real time tracking by SMS/GPRS
• Low battery alarm;
• Geo-fence alarm ;
• Move alarm
• Add Smart sleep save power Mode
• Add AGPS function, receive GPS signals faster
• Add waterproof and dust proof
• Patented product
• Add Roll call positioning
• Add app set

3. Notices:

1. GPS tracking can be worked outdoor. Must have mobile phone GSM signal and have GPS signal. It can block GPS satellite signal when there are metal or building above the GPS tracker.
2. Please make sure 4G SIM card or compatibility 4G GSM network SIM card, supports making calls, sending messages, GPRS network, has money, and the PIN code is canceled.

SIM Card Types: Normal SIM ❌, Micro SIM ❌, Nano SIM ✔️

3.1 Quick using

Accessories Name:

A GPS tracker device and a SIM card are shown.

3.3 Use mobile phone call the device and hang up or sending message

Send SMS "smslink123456" to the SIM card in the tracker, and respond to a real-time latitude and longitude information as following:

GPS!
Lat:N22.691745
Long:E113.956781
Speed:0.0 Bat:15%
Time:06/28/18 03:58 101894586
http://maps.google.com/maps?q=N22.691745,E113.956781

Picture (1) have gps signal

sMcc:460 sMnc:0
sLac:9786 Cellid:3552
Time:06/01/15 00:01
Bat:85%
[IMEI]:353603310000037

Picture (2) no gps signal

4. Initialization

Send SMS "begin+password" to the unit, it will reply "begin OK" and initialize all the settings to default factory settings. (default password: 123456)

For example: send SMS "begin123456", it will reply "begin ok". (no quotation marks when sending all the SMS)

5 Change Password

5.1 Send SMS "password+old password+space+new password" to the unit to change the password. For example: send SMS "password123456 888888" to the unit. If succeeded, "password OK” will reply to your cell phone from the device tracker.

5.2 Be sure to keep the new password in mind; you have to upload the software to restore the original setting in case of losing the new password.

5.3 Attention: Make sure the new password is in 6 digits, or else the tracker cannot recognize the password.

6. Device Resetting

Send SMS "reboot123456" to the tracker device to reset the GSM module and GPS module of the tracker device, it will reply "reboot ok". (default password: 123456)

7. Authorization

There are 3 numbers to be allowed to authorize in the tracker at most.

7.1 Send SMS "admin+password+space+cell phone number" to set up an authorized number. The other authorized numbers should be set by the first authorized number. If the number is authorized, the unit will reply "admin OK" by SMS.

7.2 Delete authorization: Send SMS "noadmin+password+space+authorized number" to delete the authorized number.

8. Successive Locating Automatically

Send SMS "upload123456 10" to the tracker device, it will reply the geo-info continuously at 10 seconds intervals. (Set upload interval, Range (10-60), the set value must be a multiple of 5.) The unit will reply "upload ok" by SMS.

9. Monitor

In this mode, the user can dial up the tracker device to monitor the voice. Send SMS command "JT#" to the tracker device of vehicle terminal, it will reply "JT ok" and use mobile phone call the device, and can monitor.

Switch to positioning mode: the command: tracker123456 (Switch to tracking mode, you will get the geographic information)

10. Alarms

10.1 OVERSPEED ALARM

Set up: Send SMS "speed1233456 080" to the unit (suppose the speed is 80km/h), and it will reply "speed OK!".

Cancel: Send SMS "nospeed+password" to deactivate the overspeed alarm. Remark: It is recommended that the speed alarm is set at not less than 30km/h. For below that rate, it may cause the excursion of the GPS signal influenced by clouds etc.

10.2 MOVEMENT ALARM

Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS "move+password" to the tracker device. It will reply "move OK". In case of such a movement (the default distance is 500m), it will send SMS "Move123456" along with a Geo-info to the authorized numbers; it will alarm in 3-minute interval.

Cancel: Send SMS “nomove+password” to deactivate the movement alarm.

10.3 LOWBATTERY ALARM

SMS format: LOWBATSMS123456 on (or off)

Command: LOWBATSMS123456 off (cancel lowbattery)

LOWBATSMS123456 on (lowbattery ok)

10.4 Vibration alarm

SMS format: "shock+password" send the command to the tracker: "shock123456", the unit will reply "shock ok" by SMS.

Cancel: Send SMS "noshock+password" example: noshock123456, the tracker will reply "noshock ok".

11. Check the Vehicle State.

Send SMS command "check+password" to the tracker device in the vehicle. For example: Send SMS "check123456" to the tracker, device in the vehicle, It will reply following SMS.

IMEI:356803210265445
Bat:85%
GPS:SLEEP
GSM Signal:22
Monitor FF
APN:cmnet
IP: www.smartgpshome.com/7700

12 Time Setting

12.1 Send SMS command "time+space+zone123456+space++time" to the tracker unit, If succeed, It will reply "time OK"

12.2 For example: Send SMS "time zone123456 +8", +8 is Chinese time zone, If your country time zone is minus, send SMS "time zone123456 -8".

13. Set APN

13.1 APN standards for Access Point Name and differs from country to country. For more information about your local APN, please inquire with your local GPRS network operator.

13.2 Text the tracker a SMS "APN123456 + Space + your local APN" via a cell phone and if succeeded, the tracker will return the message "APN OK”.

13.3 E.g. Send SMS command "APN123456 CMNET". If succeeded, "APN OK” is returned by the tracker in SMS.

Notes: 123456 refer to password of tracker and CMNET is the APN of one of china GPRS Network Operator (China mobile).

14. IP and Port Setup

14.1. Send SMS as below via a cell phone: adminip + 123456 + Space + IP Address + Space + Port Number. If succeeded, "adminip OK" is returned by the device in SMS.

14.2 E.g. Send SMS command "adminip123456 B.GPS903.NET 7700" to the tracker device, If succeeded, "adminip OK" is returned by the device in SMS.

(123456 is default password, B.GPS903.NET is IP, 7700 is port).

15. Support Website tracking and APP tracking

15.1 android version: scan below QR code

15.2 ios version: search “gpsone" in app store

Online Tracking

Note: Must set the APN first.

Platform: http://www.gps903.net
IMEI No. : on the back side of the unit
Password: 123456

15.3 APP for Android/iOS

Search "gpsone" in the Apple App Store/Google Play Store to install the applications on your device.

Select "Log in by IMEI"

Server: www.gps903.net
IMEI: On the back side of the unit
Password: 123456

16. Command

NOTE:
1) Device default password:123456)
2) use of mobile phone APP or send message to the tracker about all set command

FAQ