1. Product Overview
The Kemei KM-1071 is a versatile electric hair clipper designed for professional trimming, dry-shaving, and creating sharp edges. It features a powerful high-torque rotary motor, durable stainless steel T-blades, and a long-lasting battery, making it suitable for various grooming needs including hair, beard, sideburns, and mustache trimming.
Figure 1: Kemei KM-1071 Electric Hair Clipper with included accessories (6 guide combs, cleaning brush, USB charging cable).
Package Contents:
- Kemei KM-1071 Electric Hair Clipper
- 6 Guide Combs (3mm, 6mm, 10mm, 13mm, 16mm, 19mm)
- USB Charging Cable
- Cleaning Brush
- User Manual
Video 1: Unboxing and basic overview of the Kemei KM-1071 hair clipper and its components.
2. Setup and Charging
2.1 Initial Charge
Before first use, fully charge the hair clipper. The device operates on both mains power and battery.
- Connect the USB charging cable to the clipper's charging port.
- Plug the other end of the USB cable into a compatible USB power adapter (not included) or a USB port.
- The multi-function indicator light will turn red, indicating that the clipper is charging.
- A full charge takes approximately 3 hours. Once fully charged, the indicator light will turn green.
Figure 2: Multi-function indicator light displaying red during charging and green when charging is complete.
2.2 Attaching Guide Combs
The Kemei KM-1071 comes with 6 guide combs for various cutting lengths.
- Ensure the clipper is turned off.
- Select the desired guide comb (3mm, 6mm, 10mm, 13mm, 16mm, or 19mm).
- Align the comb with the clipper blade and push it firmly until it clicks into place.
- To remove, gently pull the comb away from the blade.
Figure 3: The Kemei KM-1071 clipper shown with its six included guide combs for various cutting lengths.
3. Operating Instructions
3.1 Powering On/Off
Locate the power switch on the side of the clipper. Slide it up to turn the clipper ON and down to turn it OFF.
Figure 4: Key features of the clipper, including the power switch, regulator, charge indicator, and hook buckle.
3.2 Adjusting Cutting Length
The clipper offers two methods for adjusting cutting length:
- Guide Combs: For lengths from 3mm to 19mm, attach the appropriate guide comb as described in Section 2.2.
- Moving Knife Adjustment: For fine-tuning and shorter lengths (less than 0.5mm), use the lever on the side of the clipper. This allows for four gear adjustments: 0.6mm, 0.4mm, 0.3mm, and 0.2mm. Turn the adjusting rod counterclockwise to reduce the tooth distance of the tool head for more subtle variations.
Figure 5: The four-gear adjustment mechanism for the moving knife, allowing precise control over cutting length from 0.2mm to 0.6mm.
3.3 Trimming Techniques
The Kemei KM-1071 is designed for both wet and dry haircuts, as well as beard and mustache trimming.
- General Haircut: Start with a longer guide comb and gradually switch to shorter ones until the desired length is achieved. Move the clipper against the direction of hair growth.
- Beard and Mustache Trimming: Use appropriate guide combs for desired beard length. For shaping and detailing, remove the guide comb and use the adjustable blade for precise lines.
- Dry Shaving & Edging: The T-blades provide a super-close, clean shave without causing razor bumps or irritation. Use without a guide comb for crisp lines and sharp edges.
- Safety Feature: The R-type fillet teeth design ensures safe contact with skin, preventing nicks and cuts.
Figure 6: Close-up view of the R-type fillet teeth, designed for safe and comfortable skin contact.
Figure 7: Examples of intricate carved pattern hairstyles that can be achieved with the precision of the Kemei KM-1071 clipper.
4. Maintenance
4.1 Cleaning the Blades
Regular cleaning ensures optimal performance and longevity of your clipper.
- Turn off the clipper and disconnect it from any power source.
- Remove the guide comb.
- Use the provided cleaning brush to remove any loose hairs from the blades and the clipper body.
- For a more thorough clean, the blades can be carefully detached (refer to specific instructions if provided in the physical manual for your model, as detachment methods can vary).
- Wipe the clipper body with a dry cloth. Do not rinse the entire clipper under water unless explicitly stated as waterproof in your specific model's documentation.
4.2 Lubrication
To maintain blade sharpness and smooth operation, it is recommended to lubricate the blades regularly.
- Apply a few drops of clipper oil (not included due to air shipping limitations) to the blades after each cleaning or every few uses.
- Turn the clipper on for a few seconds to distribute the oil evenly.
- Wipe off any excess oil.
5. Troubleshooting
5.1 Clipper Not Turning On
- Ensure the battery is charged. Connect the clipper to the charger and check if the indicator light turns red.
- Verify the power switch is fully in the 'ON' position.
5.2 Poor Cutting Performance
- Check if the blades are clean and free of hair buildup. Clean them thoroughly with the brush.
- Ensure the blades are properly lubricated.
- Verify that the guide comb is correctly attached and not damaged.
- The blades may be dull. If performance does not improve after cleaning and oiling, consider professional sharpening or blade replacement if available.
5.3 Charging Indicator Issues
- If the indicator light does not turn on when charging, ensure the USB cable and power source are working correctly. Try a different cable or adapter.
- If the light remains red after 3 hours of charging, the battery may not be holding a charge, or there might be an issue with the charging circuit.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Kemei |
| Model Number | KM-1071 |
| Item Type | Hair Trimmer |
| Power | 5W |
| Voltage | <20V |
| Battery Type | 1500mAh |
| Battery Charging Time | 3 hours |
| Battery Life (Using Time) | 240 minutes |
| Is Batteries Included | Yes |
| Power Type | Mains and battery operation |
| Blade Material | Stainless steel (Carbon steel broadsheet) |
| Minimum Cutting Length | less than 0.5mm (adjustable to 0.2mm) |
| Maximum Cutting Length | over 20 mm (with guide combs up to 19mm) |
| Length Adjustment Method | Change of nozzles (guide combs) and moving knife adjustment |
| Number of Nozzles | 6 pieces (3mm, 6mm, 10mm, 13mm, 16mm, 19mm) |
| Purpose | For beard and mustache, For the head |
| Function | Wet haircut, Dry haircut, Fast Charging |
| Material | ABS |
| Motor Type | Vibratory |
| Commodity Quality Certification | CE |
| High-concerned chemical | None |
| Origin | Mainland China |
7. User Tips
- For best results, ensure hair is clean and dry before trimming, especially for precision work.
- When using guide combs, always start with a longer comb than you think you need, and gradually work your way down to shorter lengths.
- Move the clipper slowly and steadily against the direction of hair growth for an even cut.
- Clean and oil the blades regularly to prevent snagging and maintain cutting efficiency.
- Store the clipper and its accessories in a dry, safe place away from direct sunlight and moisture.
8. Warranty and Support
For any issues, questions, or warranty claims regarding your Kemei KM-1071 Electric Hair Clipper, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase.
