1. Introduction
The LEKATO CA-100 is a compact and rechargeable 20W electric guitar amplifier designed for desktop practice, recording, and live performance applications. Engineered with precision components, it delivers powerful, clear sound reproduction with rich tonal character and responsive dynamics. Its intuitive control layout allows for quick tone shaping, and multiple input options ensure compatibility with a wide range of gear. Housed in a durable cabinet with premium speakers, this unit provides consistent, reliable performance session after session.
This manual provides essential information for the safe and effective use of your LEKATO CA-100 amplifier. Please read it thoroughly before operation.
2. Safety & Warnings
WARNING: Read all instructions before use to ensure safety and prevent damage.
General Safety Advisory
This area, operation, or product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed.
Essential Precautions:
- Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
- Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
- Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
- Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.
Immediate Action Required:
- STOP if you are uncertain about the safety of any action.
- CONSULT the relevant official safety manuals or qualified personnel for guidance.
- DO NOT PROCEED without proper authorization and training for hazardous tasks.
Your safety and the safety of others is paramount. Neglecting warnings can lead to severe injury or fatal accidents.
Specific Cautions:
- Power Supply: Use only the specified voltage. Unplug the amplifier during thunderstorms or extended periods of non-use.
- Proper Ventilation: Ensure adequate airflow around the amplifier to prevent overheating; do not block cooling vents.
- Avoid Moisture: Keep away from water, drinks, and humid environments to prevent electrical damage.
- Speaker Connection: Verify that the speaker impedance matches the amplifier's output specification.
- Volume Caution: Start with volume low and gradually increase to avoid sudden loud bursts that may damage hearing or speakers.
- Children: Keep the device and its cord out of reach of children under 3 years old. In case of ingestion, seek medical attention immediately.
- Polarized/Grounding Plug: Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.
- Power Cord Protection: Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and where it exits the apparatus.
- Attachments/Accessories: Use only attachments/accessories specified by the manufacturer.
- Cart/Stand Use: If used with a cart, stand, tripod, bracket, or table, use caution when moving the combination to avoid injury from tip-over.
- Servicing: Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way (e.g., power supply cord/plug damaged, liquid spilled, objects fallen in, exposed to rain/moisture, abnormal operation, dropped).
- Earthing: The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Disconnect Device: Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CE Declaration of Conformity
The CE symbol indicates that this product conforms with all applicable European Union regulations. "Conformité Européenne" (CE) confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives. By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.
3. Setup
3.1. Powering On
Connect the provided 18V power adapter to the '18V IN' port on the amplifier. Ensure the power switch is in the 'OFF' position before connecting. Once connected, you can switch the 'POWER' toggle to 'ON'.

Figure 1: Jacks for Electrical Equipment (18V IN, AUX IN, Headphone Jack, Output Port)
3.2. Connecting Your Instrument
Plug your electric guitar into the 'IN' jack on the right side of the amplifier using a standard 1/4-inch instrument cable.
3.3. Connecting Pedals (Optional)
The CA-100 features three individual 9V (100mA) DC outputs to power your guitar pedals. Connect your pedals to these outputs using appropriate power cables.

Figure 2: 9V Pedal Power Supply Outputs
3.4. Bluetooth Connection (Optional)
To use the Bluetooth audio function, power on the amplifier. On your phone or iPad, navigate to the Bluetooth settings and find 'CA-100' in the list of available devices to pair.

Figure 3: Bluetooth Connection Setup
3.5. AUX Input (Optional)
Connect an external audio device (e.g., computer, phone) to the 'AUX IN' port using a 3.5mm audio cable. This allows you to play along with backing tracks or use the amp as a desktop monitor.
3.6. Headphone Connection (Optional)
For silent practice, plug your headphones into the 'OUT' headphone jack. This will mute the main speakers.
3.7. External Amplifier/Mixer Output (Optional)
The 'OUT' port can also be used to connect the CA-100 to another amplifier with larger speakers or a mixer. This turns the CA-100 into a preamp, allowing you to utilize its effects with greater volume and sound dynamics, or for recording purposes.
4. Operating Instructions
Familiarize yourself with the controls on the front panel of the LEKATO CA-100.

Figure 4: Amplifier Front Panel Controls
4.1. Basic Operation
- Ensure all connections are secure.
- Turn the 'MASTER' volume knob to its lowest setting.
- Flip the 'POWER' switch to 'ON'.
- Gradually increase the 'MASTER' volume to your desired listening level.
4.2. Distortion Effect
The amplifier includes a distortion module. Use the following knobs to shape your distorted tone:
- DIST. (Distortion Toggle): Activates or deactivates the distortion effect.
- VOL. (Volume): Adjusts the output volume of the distortion effect.
- TONE: Controls the tonal character of the distortion, from darker to brighter.
- GAIN: Adjusts the amount of distortion or overdrive.
4.3. Delay Effect
The amplifier includes an analog delay module. Use the following knobs to control the delay effect:
- DELAY (Delay Toggle): Activates or deactivates the delay effect.
- LEVEL: Adjusts the volume of the delayed signal.
- REPEATS: Controls the number of delay repetitions.
- TIME: Sets the duration between delay repetitions.
4.4. Master Volume
The 'MASTER' knob controls the overall output volume of the amplifier.
4.5. Battery Status Indicator
The amplifier features LED indicators for battery charge level (100%, 50%, 0%).

Figure 5: Battery Life Indicator
4.6. Charging
The internal 3000mAh rechargeable battery provides approximately 3 hours of playtime when fully charged (charging time is approximately 2 hours). It is recommended not to use the amplifier while it is charging to preserve battery health.
5. Maintenance
5.1. Cleaning
Wipe the exterior of the amplifier gently with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the finish.
5.2. Ventilation
Ensure that the amplifier has adequate airflow around it to prevent overheating. Do not block the cooling vents located on the top and back of the unit.
5.3. Storage
When not in use for extended periods, store the amplifier in a dry environment, away from direct sunlight and extreme temperatures. Unplug the power adapter.
5.4. Transport
When moving the amplifier, handle it carefully and use proper padding to prevent internal damage from impacts or drops.
5.5. Disposal
This product should not be disposed of with household waste. According to the WEEE Directive (2012/19/EU) and national law, this product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). Proper disposal contributes to the efficient use of natural resources and prevents potential negative impacts on the environment and human health.
6. Troubleshooting
If you encounter issues with your LEKATO CA-100 amplifier, please refer to the following common troubleshooting steps:
- No Sound: Check all cable connections (instrument, power, headphones/external amp). Ensure the amplifier is powered on and the 'MASTER' volume is turned up. Verify your instrument is working correctly.
- Distorted/Unclear Sound: Check the 'GAIN' and 'VOL.' knobs for the distortion effect. Ensure the 'TONE' knob is set appropriately. If using an external speaker, verify impedance matching.
- Bluetooth Connection Issues: Ensure the amplifier is powered on and within range of your device. Forget 'CA-100' from your device's Bluetooth list and try pairing again.
- Short Battery Life: Ensure the amplifier is fully charged (approx. 2 hours). Avoid using the amplifier while charging. Battery performance may degrade over time with extensive use.
- Overheating: Ensure cooling vents are not blocked and there is adequate airflow around the unit. Discontinue use if overheating occurs and allow it to cool down.
If the problem persists after following these steps, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | LEKATO |
| Model | CA-100 |
| Speaker | 2 x 4ohm 10W high quality speakers |
| Total Output Power | 20W |
| Effects | Distortion, Analog Delay |
| Distortion Controls | Volume, Tone, Gain |
| Delay Controls | Level, Repeats, Time |
| Bluetooth | CA-100 (device name) |
| Battery Capacity | 3000mAh Rechargeable Battery |
| Charging Time | Approx. 2 hours |
| Run Time | Approx. 3 hours |
| Pedal Power Output | 3 x 9V 100mA DC outputs |
| Interface | 3.5mm Headphone Jack, AUX IN, Output to Amp or Mixer, 18V IN |
| Weight | 1.23 kg |
| Size | 8.7 x 7.5 x 3.2 in / 22 x 19 x 8 cm |
8. User Tips
- Practice Quietly: Utilize the headphone jack for private practice sessions without disturbing others.
- Expand Your Sound: Connect the 'OUT' port to a larger amplifier or PA system to use the CA-100 as a preamp with its built-in effects for bigger venues or recording.
- Jam Along: Use the Bluetooth or AUX IN features to play along with your favorite songs or backing tracks, enhancing your practice experience.
- Pedal Power Convenience: The integrated 9V pedal power outputs are handy for powering your effects pedals, especially when practicing outdoors or in situations where a power strip isn't readily available.
- Optimal Charging: For best battery longevity, avoid using the amplifier while it is actively charging.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the official LEKATO website or contact the seller directly. Keep your purchase receipt as proof of purchase.
A digital version of the user manual (PDF) is available for download from the manufacturer's website or can be referenced via the provided link: LEKATO CA-100 User Manual (PDF).