1. Product Overview
The HOCO W46 Wireless Bluetooth 5.3 Headphone offers a comfortable and immersive audio experience with its 40mm speakers and surround sound design. Featuring Bluetooth 5.3 for stable connectivity, a foldable design for portability, and a long-lasting battery, it's suitable for various activities including sports and gaming.
2. Package Contents
Please check the package for the following items:
- HOCO W46 Wireless Bluetooth Headphone
- User Manual (this document)
- Charging Cable
- Detachable Audio Cable (3.5mm AUX)
3. Setup and First Use
3.1 Charging the Headphone
- Connect the provided charging cable to the Charging Port on the headphone.
- Connect the other end of the charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED Indicator will illuminate during charging.
- A full charge takes approximately 2 hours. The LED Indicator will change or turn off once charging is complete.
3.2 Powering On/Off
- Power On: Press and hold the Power Button until the LED Indicator lights up.
- Power Off: Press and hold the Power Button until the LED Indicator turns off.
3.3 Bluetooth Pairing
- Ensure the headphone is powered off.
- Press and hold the Power Button for a few seconds until the LED Indicator flashes, indicating it's in pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "HOCO W46" from the list of found devices.
- Once connected, the LED Indicator will typically show a steady light or flash slowly.
3.4 Adjusting the Headband
The headband features an 8-level retractable and adjustable mechanism. Gently slide the earcups up or down to find a comfortable fit that contours to your ears without pressing them.
4. Operating Instructions
4.1 Controls Overview
- Power Button: Power On/Off, Play/Pause (short press).
- Volume + / Next track: Short press for Volume Up, Long press for Next Track.
- Volume - / Previous track: Short press for Volume Down, Long press for Previous Track.
- Charging Port: For connecting the charging cable.
- AUX interface: For wired audio connection using the detachable audio cable.
- LED Indicator: Shows power, charging, and pairing status.
- Microphone: For hands-free calls.
4.2 Audio Modes
- Bluetooth Mode: After successful pairing, audio will stream wirelessly from your device.
- AUX Mode: Connect the detachable audio cable to the AUX interface on the headphone and to your audio source. The headphone will automatically switch to wired mode.
4.3 Changing Prompt Tone Language
In an unpaired state, double-click the Power Button to switch between English and Chinese prompt tones.
5. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
- Storage: When not in use, fold the headphones to save space and protect them. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headphones regularly, even if not used for extended periods.
- Water Resistance: These headphones are not waterproof. Avoid exposure to water or excessive moisture.
6. Troubleshooting
- Headphones won't turn on: Ensure the battery is charged. Connect the charging cable and try again after a few minutes.
- Cannot pair with device:
- Make sure the headphone is in pairing mode (LED flashing).
- Ensure Bluetooth is enabled on your device and it's within 10 meters of the headphone.
- Turn off and on Bluetooth on your device, then try searching again.
- If previously paired, try forgetting the device on your phone and re-pairing.
- No sound:
- Check the volume level on both the headphone and your connected device.
- Ensure the headphone is properly connected via Bluetooth or AUX cable.
- If using AUX, ensure the cable is fully inserted into both the headphone and the audio source.
- Poor sound quality:
- Move closer to your Bluetooth device to reduce interference.
- Ensure there are no obstructions between the headphone and your device.
- Try a different audio source or file to rule out source issues.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | W46 Charm BT Headset |
| Bluetooth Version | 5.3 |
| Battery Capacity | 200mAh |
| Use Time (Battery Life) | Up to 20 hours |
| Standby Time | Up to 180 hours |
| Charging Time | Approximately 2 hours |
| Speaker Diameter | 40mm |
| Frequency Response Range | 20 - 20000Hz |
| Impedance Range | Up to 32 Ω |
| Maximum Wireless Range | <10m |
| Material | Plastic |
| Net Weight | 109g |
| Dimensions (L*W*H) | 178*172*63mm |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Dynamic |
| Charging Method | Cable |
8. User Tips
- Wired Connection: For devices without Bluetooth or to conserve battery, use the included detachable audio cable for a direct wired connection.
- Comfortable Fit: Take advantage of the 8-level adjustable headband to ensure the earcups sit comfortably over your ears for extended listening sessions. The soft leather earpads are designed for comfort and to prevent pressure.
- Sound Immersion: The headphones are designed to provide a sense of space and surround sound, fitting comprehensively around the ears to enhance the original audio and prevent sound leakage.
9. Warranty and Support
HOCO products are manufactured to high-quality standards. For any issues or support inquiries, please refer to the seller or retailer from whom you purchased the product. Keep your proof of purchase for warranty claims.
