Introduction
The easyover ICS006 Digital Water Flow Meter is designed to accurately measure water usage and flow rate in various outdoor applications, such as garden watering, RV tank filling, and pool filling. This manual provides detailed instructions for the proper setup, operation, and maintenance of your water flow meter to ensure optimal performance and longevity.
Package Contents
- 1x Digital Water Flow Meter (ICS006)
- 1x User Manual
- 1x CR2032 Battery (pre-installed or included)
Setup and Installation
Follow these steps to properly set up and install your water flow meter:
- Battery Installation: The device typically comes with a CR2032 battery pre-installed. If not, open the replaceable battery compartment and insert one CR2032 battery, ensuring correct polarity.
- Connection: The water flow meter is designed for simple and fast connection to standard 3/4" garden hoses, faucets, sprinklers, and nozzles using the included quick connectors.
- Orientation: Ensure the water flow direction icon on the meter aligns with the direction of water flow. This is crucial for accurate measurement.
- Secure Connections: Firmly tighten and lock all hose quick connectors to prevent any leakage during operation.
Operating Instructions
The water flow meter features a high-precision LCD display and a single button for easy control. It offers four measurement modes:
- Flow Mode: Displays the real-time water flow rate (e.g., L/min or GPM).
- Consumption Mode: Shows the water consumption of the current watering session.
- Avg Mode: Displays the daily average water consumption for the last 7 days.
- Total Mode: Shows the accumulative total water consumption.
Button Functions:
- Switching Modes: Briefly press the button to cycle through the four display modes (Flow, Consumption, Avg, Total).
- Switching Units (GAL/L): In Flow Mode, hold the button pressed for 2 seconds to switch between Gallons (GAL) and Liters (L).
- Reset to Zero: Hold the button pressed for 2 seconds to reset the current measurement to zero.
The device will automatically enter standby mode without display after 1 minute of no operation to conserve battery life.
Video 1: Product demonstration showcasing the water flow meter in various applications.
Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the display or casing.
- Waterproof Rating: The device is IPX6 waterproof, meaning it can withstand powerful water jets. However, it is not designed for submersion.
- Battery Replacement: When the display becomes dim or unresponsive, replace the CR2032 battery. Refer to the "Setup and Installation" section for battery compartment access.
- Storage: Store the water flow meter in a dry, cool place when not in use, especially during freezing temperatures, to prevent damage.
Troubleshooting
- No Display/Dim Display:
- Check the CR2032 battery. Replace if necessary.
- Ensure the device is not in standby mode (activate by pressing the button).
- Inaccurate Readings:
- Ensure water flows fully through the digital flowmeter. Partial flow can lead to inaccuracies.
- Verify the water flow direction icon aligns with the actual flow.
- Reset the measurement by holding the button for 2 seconds.
- Water Leakage:
- Ensure all quick connectors are firmly tightened and locked.
- Check the rubber rings within the quick connectors for proper seating and damage.
If you encounter persistent issues not covered here, please contact customer support for assistance.
Specifications
| Feature | Specification |
|---|---|
| Model Number | ICS006 |
| Brand Name | easyover |
| Waterproof Rating | IPX6 |
| Joint Pipe Bore Size | 3/4" |
| Coupling Type | Male BSPP Thread |
| Measurement Range | 1~ 40 L/min (0.3~ 10.6 GPM) |
| Max Water Consumption | 9,999.9 L or 9,999.9 Gal |
| Working Pressure | 0.5~8 BAR (7.25~116 PSI) |
| Flow Max | 2400 L/H (10.6 GPM) |
| Measurement Tolerance | ±5% |
| Accuracy | Up to 0.1 (e.g., 1/10th gallon) |
| DIY Supplies Category | Plumbing |
| Origin | Mainland China |
| Certification | CE, RoHS |
User Tips
- Accurate Measurement: For the most accurate readings, ensure that water flows fully through the meter. Avoid situations where the water stream is very weak or intermittent.
- Prevent Leaks: Always double-check that the quick connectors are securely tightened. The included rubber rings are essential for a watertight seal.
- Understanding the Display: The display shows measurements with one decimal place (e.g., 38.6 L or 9999.9 GAL). This indicates accuracy up to one-tenth of the unit.
- RV Travel: Use the meter to precisely fill your RV's fresh water tank, preventing overfilling and ensuring you have enough water for your trip without carrying unnecessary weight.
- Garden Watering: Tailor your watering to specific plant needs by monitoring the exact amount of water delivered, helping to prevent both under-watering and over-watering.
Warranty and Support
The easyover ICS006 Digital Water Flow Meter is designed for durability and reliable performance. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Please retain your proof of purchase for warranty purposes.
