User Manual

Important Safety Instructions

Please follow these instructions carefully to actively reduce the risk of electronic shock, and injury to persons or property:

• Keep all crevices and openings of the product unblocked.
• Do not set the product on a heating register or over a radiator.
• Ensure that you provide proper ventilation at the installation site.
• Do not use while standing in or nearby water (e.g., bathtubs, kitchen sinks, or swimming pools).
• Do not use it unless your body - and especially your hands - are completely dry.
• Never insert objects of any kind into the product vents as that may result in fire or electric shock.
• Do not use liquid cleaners, aerosol cleaners, chemicals, or cleaning agents to clean this product.
• Clean this product with a soft, damp cloth.
• Do not disassemble this product.

If your device requires service or repair work, please contact our Support Department. Read and understand all instructions and save them for future reference. Follow all warnings and instructions as marked on the product. Save these instructions.

Introduction

Thank you for purchasing this adapter. This user guide will provide comprehensive information to maximize the utility of your adapter. We kindly request that you review the instructions diligently. It's important to note that wireless Android Auto function only works in the smart phone built in this app and equipped with 5GHz Wi-Fi.

Compatibility

This adapter is designed to add wireless CarPlay and wireless Android Auto functionality to your vehicle's existing Toyota Touch 2 and Entune 2.0 systems. It is compatible with over 90% of Toyota models from 2014-2019 that have a Panasonic/Fujitsu/Pioneer host unit.

Important: Please ensure your car has both wired CarPlay and wired Android Auto functions. If your car only has wired CarPlay but not wired Android Auto, the wireless Android Auto feature will not work with this adapter.

Supported Phone OS:

• iPhone: iOS 10 or Newer
• Android: Android 11 or Newer (requires 5GHz Wi-Fi support on the phone)

To verify compatibility for your specific vehicle model, please refer to the following lists:

• Apple CarPlay compatible models: https://www.apple.com/ios/CarPlay/available-models/
• Android Auto compatible models: https://www.android.com/auto/compatibility/

Compatible Toyota Models (2014-2019) with Touch2 & Entune2.0 System (6"/7"/8" Screen):

If you are unsure about your car's compatibility, please contact customer support by providing photos of your car's center console, vehicle model and year, and screen size.

Figure 1: Compatible Toyota Touch 2 and Entune 2.0 System Hosts

Figure 2: Visual representation of compatible Toyota car models.

Product Features

• Supports Toyota car models including Corolla, Tacoma, Camry, Avalon, Prius, Sienna, Land Cruiser, and more. Refer to the compatible model list for full details.
• Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 Technology.
• Supports CarPlay, Android Auto, Mirror Link, and USB Flash drive.
• Control via steering wheel controls and touch control (*dependent on vehicle specification) and voice control using "Hey Siri...".
• GPS navigation Apps like Google Maps, Waze, and Apple Maps are all available with live traffic information.
• Built-in DSP (Digital Signal Processor) for fully adjustable Audio EQ and best audio quality.
• Features 2 RCA inputs, allowing the addition of rear and front PAL, NTSC, and CVBS AHD cameras.
• Plug and play, non-destructive installation, free from wire breaks.
• Switch in/out of CarPlay display at any time using factory controls.

Figure 3: Wireless CarPlay & Android Auto functionality with various apps.

Figure 4: Siri voice control for hands-free operation.

Figure 5: Seamless integration with original car controls.

Figure 6: Key features of CarPlay and Android Auto.

Figure 7: Product Information and included cables.

Figure 8: Wiring harness connection points on the car radio unit.

Package Contents

• 1 x Toyota upgrade box
• 1 x Power Harness
• 1 x USB/MIC Cable
• 1 x WIFI Antenna

Figure 9: Contents of the product package.

Setup Instructions

Professional installation is recommended. Improper installation may damage the product or vehicle. If you are unsure, please consult a professional.

1. Hardware Installation

1. Locate the USB port in your vehicle. This port may be marked with a CarPlay car icon or a smartphone icon.
2. Plug the adapter into the vehicle's USB port.
3. Connect the provided wiring harness to the back of your car's main unit. The video demonstrates connecting three main connectors from the harness to the corresponding ports on the car radio unit.
4. Ensure all connections are secure.

Video 1: Installation and basic operation demonstration for Toyota RAV4.

2. Phone Pairing (Wireless CarPlay / Android Auto)

After connecting the hardware, the car's radio system will display a new interface with options like Carplay, Auto, AirPlay, AutoLink, Bluetooth, USB, Camera, and Settings.

Figure 10: New interface after adapter installation.

For iPhone (Wireless CarPlay):

1. Before pairing with a new iPhone, forget any previously connected Bluetooth and Wi-Fi devices (e.g., factory car Bluetooth or Wi-Fi dashcamera).
2. Turn on your iPhone's Wi-Fi and Bluetooth.
3. Pair your iPhone to the Bluetooth device named "SmartBox-xxxx" (where xxxx is a unique identifier).
4. On your iPhone, tap "Pair-Allow-Use CarPlay" on the popup notifications.
5. It will connect to wireless CarPlay after a few seconds.

Figure 11: iPhone Bluetooth pairing steps for CarPlay.

For Android Phone (Wireless Android Auto):

1. Before pairing with a new Android phone, forget any previously connected Bluetooth and Wi-Fi devices (e.g., factory car Bluetooth or Wi-Fi dashcamera).
2. Turn on your Android smart phone's Wi-Fi and Bluetooth.
3. Pair your Android phone to the Bluetooth device named "SmartBox-xxxx".
4. On your Android phone, tap "Pair-Allow" on the popup notifications.
5. It will connect to wireless Android Auto after a few seconds.

Note: Because Android Auto does not have the same prompt image as CarPlay, after your first successful connection, the prompt image will not be displayed unless you forget the current device and reconnect.

Operating Instructions

1. Accessing CarPlay/Android Auto

There are two ways to enter the CarPlay/Android Auto interface:

• Method 1: On the car's audio source selection screen, click "AUX" to enter the system.
• Method 2: Press the "VOL" button (or equivalent) on your car's radio unit to switch back to the CarPlay/Android Auto interface.

2. Using Voice Control (Siri)

To activate Siri, long-press the voice control button on your steering wheel or say "Hey Siri".

Note: When using the CarPlay Siri function, you may need to close your car's native voice assistant to avoid conflicts.

3. Media Playback and Volume Control

You can control media playback (play, pause, skip tracks) and adjust the volume directly within the CarPlay/Android Auto interface using the car's touch screen or steering wheel controls. The volume indicator on the car's display may not change, but the audio volume will be adjusted.

4. Mirror Link Function

The Mirror Link function allows you to mirror your smartphone's screen to the car's display, enabling you to watch videos or use other apps wirelessly and synchronously.

Figure 12: Mirror Link with Smart Phones.

Maintenance

To ensure the longevity and proper functioning of your adapter:

• Keep the device clean by wiping it with a soft, damp cloth. Avoid using liquid cleaners, aerosol cleaners, or harsh chemicals.
• Ensure the device is not exposed to extreme temperatures or direct sunlight for prolonged periods.
• Avoid physical damage by handling the device carefully and ensuring it is securely installed.

Troubleshooting (FAQ)

Q: What should I do if there is no response when I plug in the product?

A: 1. Replug the adapter.
2. Pull out the product, then check if the original car's wired Apple CarPlay/Android Auto can be used normally.
3. If it still not working, please contact us to get a replacement.

Q: Can't connect automatically.

A: 1. Please turn on your phone's Bluetooth and WLAN, and make sure both Bluetooth and WLAN do not connect to other devices. Neglect the original car Bluetooth.
2. Replug the adapter. If it doesn't work, then forget this adapter's Bluetooth on phone. Reboot your phone and repair the Bluetooth.
3. If it still doesn't help, please reference the "Upgrade Steps" section to upgrade the firmware.

Q: When stuck in the connection state, and it keeps connecting, what should I do?

A: 1. Please click settings - clear pair list, and ignore the Bluetooth pairing record on the phone, then restart your phone.
2. Restore the factory settings of the original car.

Q: My phone can identify the product Bluetooth/WiFi, but my car does not enter the connection page.

A: 1. Reset the box: Use your phone to scan the QR code below or enter 192.168.200.1 on iPhone's or Android smart phone browser. Then select the Factory reset.
2. Restore the factory settings of your original car system.

Firmware Upgrade

Note: Please do NOT plug the adapter into the car stereo to perform the upgrade. Many car stereo USB ports may lose power during an update, which can cause adapter failure. Always plug the adapter into a stable power supply source like a phone charger or a computer's USB port.

1. Use your iPhone to connect to the adapter's Wi-Fi network. The default password is "12345678". If your phone cannot find the Wi-Fi, manually join the adapter Wi-Fi network named "[SmartBox-xxxx]".
2. On your phone's browser, enter "192.168.200.1" and tap "upgrade" if an upgrade is available.

Figure 13: Connecting to the adapter's Wi-Fi.

Figure 14: Firmware upgrade interface in browser.

Specifications

User Tips

• For optimal performance, ensure your smartphone's operating system is up to date (iOS 10+ or Android 11+).
• If experiencing connection issues, try forgetting the device in your phone's Bluetooth settings and re-pairing.
• Always perform firmware updates using a stable power source, not directly from the car's USB port, to prevent damage.

Warranty and Support

If we repair or replace a product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period. If you are not satisfied with your purchase for any quality problem, you shall return the item in its original condition within 30 days of receipt and we will gladly provide a refund, replacement, or an exchange. Any items received after 30 days will not be accepted for refund. For any items received after 30 days, we will provide repair service during the warranty period.

Warranty Exclusions:

• Warranty expired.
• Damage caused by human factors, accident, misuse of the product.
• Products purchased from unauthorized channels.
• Unauthorized alteration to change of parts or components of the product.
• Failure to provide a receipt or proof of purchase.
• Malfunctions caused by phenomena such as fire, natural disasters.

For Warranty Claims:

To process your warranty claim efficiently, please provide:

• A copy of the receipt showing the purchase date.
• A clear reason for the claim (description of the defect).

For service or repair work, please contact our Support Department.

A PDF user manual is available for download: User Manual (PDF)