Introduction
The QCY AilyBuds Clear are truly wireless semi in-ear earphones designed for a superior audio experience. Featuring Bluetooth 5.3 for stable connectivity, 4 Mics ENC (Environmental Noise Cancellation) for crystal-clear calls, and a low-latency gaming mode, these earbuds are versatile for various uses. This manual provides detailed instructions on how to set up, operate, and maintain your QCY AilyBuds Clear earphones.
What's in the Box
Upon opening your QCY AilyBuds Clear package, you will find the following items:
- QCY AilyBuds Clear Earbuds (Left and Right)
- Charging Case
- Type-C Charging Cable
- User Manual

Product Overview
Familiarize yourself with the components and controls of your QCY AilyBuds Clear earphones:
- Touch Panel: Located on the outer surface of each earbud for various controls.
- Sound Hole: Audio output.
- LED Indicator: Provides status information (pairing, charging).
- Microphone: For calls and voice commands.
- Pogo Pins: Charging contacts inside the case.
- Charging Case Button: Used for pairing and factory reset.
- Type-C Charging Port: For charging the case.

Setup Instructions
Wearing the Earbuds
- Properly wear the earbuds on both the left and right sides. After wearing them, you can make slight adjustments by rotating to find a comfortable and secure position.
- Ensure the microphone opening is facing downward towards your mouth.
- Incorrect earbuds placement may affect both call quality and hearing experience.
Initial Pairing
Follow these steps for the first-time connection:
- Take out both earbuds from the charging case. Peel off any isolation film from each earbud.
- Place both earbuds back into the charging case and close the lid. This step activates the new device.
- Retrieve both earbuds again.
- On your phone, go to Bluetooth settings, refresh the list of available devices, and tap on "QCY AilyBuds Clear" to connect.
*Opening the charging case automatically turns on the earbuds. If they do not turn on automatically, please charge them and try again.
One-Click Device Switching
To switch the earbuds' connection from one device (Device A) to another (Device B):
- Open the lid of the charging case with both earbuds inside.
- Keep pressing the charging case button for approximately 3 seconds. The white light on the secondary earbud will be solid, and the white light on the main earbud will flash, indicating the earbuds have entered device pairing mode.
- On Device B, search for "QCY AilyBuds Clear" in the Bluetooth settings and tap to connect.
Operating Instructions
The QCY AilyBuds Clear earphones feature intuitive touch controls:
- Power On: Open the charging case (with earbuds inside) or, if earbuds are outside the case, long-press either touch panel for 1.5 seconds.
- Power Off: Place the earbuds into the charging case and close the lid.
- Play/Pause Music: Double-tap either touch panel.
- Previous Track: Long-press the left earbud touch panel for 1.5 seconds.
- Next Track: Long-press the right earbud touch panel for 1.5 seconds.
- Volume Up: Single-tap the right earbud touch panel.
- Volume Down: Single-tap the left earbud touch panel.
- Answer/End Call: Double-tap either touch panel.
- Reject Call: Long-press either touch panel for 1.5 seconds.
- Voice Assistant: Triple-tap the left earbud touch panel.
- Low-latency Mode (Gaming Mode): Triple-tap the right earbud touch panel to activate or deactivate.
- Remote Shutter (Photography): Open the camera app on your phone, then tap the touch panel of either the left or right earbud to take a photo.

Charging
Earbuds Charging
- When charging, the red light on the earbuds will stay solid.
- Once fully charged, the white light will turn on for 30 seconds and then turn off.
Charging Case Charging
- During charging, the red light on the charging case will stay solid.
- When fully charged, the white light on the charging case will stay solid.
Charging Case Battery Status
- Sufficient Battery: When the charging case is opened, the white light will stay on for 5 seconds before turning off.
- Low Battery: When the charging case is opened, the red light will stay on for 5 seconds before turning off.

QCY App
Enhance your experience by downloading the QCY App. The app unlocks a range of customizable features:
- Customizable control settings
- Pop-up window for quick status
- Battery level display for each earbud
- EQ (Equalizer) settings for personalized sound
- Sleep/Gaming mode toggles
- Firmware updates
- "Find headset" function
- And more...
To download, scan the QR code provided in the physical user manual or search for "QCY" in your device's app store (Android 8.0 or above, iOS 13 or above required). Pairing pop-up requires Android system and cannot be enabled until you open the App and enable Bluetooth on phone.
Factory Reset
If you encounter persistent connection issues or other malfunctions, performing a factory reset can often resolve them. This process will remove all previous pairing records.
- Place both earbuds back into the charging case.
- Open the lid of the charging case.
- Keep pressing the charging case button for 10 seconds.
- The LEDs on the earbuds will blink red 5 times, indicating that the reset is complete once the blinking stops.
- After the factory reset, follow the "Initial Pairing" steps to reconnect your earbuds.
Troubleshooting (FAQ)
Q: Only one earbud has sound. How to fix this?
A: Place both earbuds back into the charging case, close the lid, and then take them out again. Check if both earbuds now have sound. If only one still has sound, perform a factory reset on both earbuds.
Q: My phone shows "cannot connect". How to fix this?
A: Delete the previous pairing record for "QCY AilyBuds Clear" from your phone's Bluetooth settings. After deleting, search for the earbuds again and re-pair them.
Q: No sound during music playback or calls. How to fix this?
A: For Android phones, check the settings icon next to the Bluetooth device name. Ensure "phone audio" and "media audio" are enabled. If still no sound, re-pair the earbuds with your phone. For general issues, ensure volume is up on both phone and earbuds.
Q: Why is there latency in video/games?
A: Latency can be affected by the usage environment, network conditions, and your phone's audio codec. While the earbuds feature a low-latency mode, external factors can still cause varying degrees of delay in audio data transmission.
Q: The sound is stuttering/intermittent. How to fix this?
A: If there are strong interferences from Wi-Fi, 5G/4G signals, or high-power electrical appliances in your surroundings, it may cause stuttering or intermittent sound. Try moving to a different environment or re-pair the earbuds to resolve the issue.
Specifications
| Feature | Detail |
|---|---|
| Product Name | QCY AilyBuds Clear |
| Pairing Name | QCY AilyBuds Clear |
| System Compatibility | iOS / Android |
| Bluetooth Version | 5.3 |
| Operation Range | 10m (Max wireless range: 10m-20m) |
| Earbud Battery Life | 5 hours playback (single charge) |
| Total Battery Life (with case) | 22.5 hours |
| Bluetooth Profiles | A2DP/AVRCP/HFP |
| Earbud Battery Capacity | 27mAh |
| Charging Case Battery Capacity | 350mAh |
| Charging Port | Type-C |
| Waterproof Rating | IPX5 |
| Earbud Dimensions | 33.1*17.0*19.2mm |
| Case Dimensions | 53.1*54.9*29.2mm |
| Material | ABS, Plastic |
| Weight | 40g |
| Sound Isolating | Yes |
| Voice Assistant Built-in | Yes |
| Earcups Type | Semi-open |
| Number of Drivers | 2 |
| Impedance Range | up to 32 Ω |
| Codecs | sbc |
| With Microphone | Yes (4 Mics ENC) |
| Wireless Type | Bluetooth (Truly Wireless) |
| Support APP | Yes |
| Frequency Response Range | 100 - 10000Hz |
| Sensitivity | 99dB |
| Function | Video Game, Common Headphone, HiFi Headphone, For Outdoor, For Office |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | No (Touch Control) |
| Vocalism Principle | Dynamic |
| Certification | CE, RoHS, BQB |
| Origin | Mainland China |

Safety Precautions
Please read these safety guidelines carefully before using your QCY AilyBuds Clear earphones:
- Always read and retain this user manual for future reference.
- For first-time use, ensure the product is fully charged.
- If the product is not used for an extended period (more than 2 weeks), please recharge it to maintain battery health.
- Only use chargers produced by legitimate manufacturers and certified by national safety authorities.
- Battery Safety: Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids. This can prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be performed by the manufacturer or authorized service personnel.
- Avoid dropping, crushing, or puncturing the battery. Prevent external pressure that may lead to internal short circuits and overheating.
- Do not dismantle or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low (below 0°C) or high (above 45°C) temperatures.
- Avoid directing the product's indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Hearing Protection: Prolonged use of earphones at high volumes can cause hearing damage. Please manage your listening time and volume levels responsibly.
Hazardous Substances Table
This table indicates the presence of hazardous substances in the product components, in accordance with SJ/T 11364 regulations:
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer Casing | O | O | O | O | O | O |
| Circuit Board Assembly | X | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Charging Cable | X | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
O: Indicates that the hazardous substance contained in all homogeneous materials for this part is below the limit requirements specified in GB/T 26572.
X: Indicates that the hazardous substance contained in at least one homogeneous material for this part exceeds the limit requirements specified in GB/T 26572.
Environmental Protection Use Period: Under normal operating conditions, the environmental protection use period for this product is 10 years. During this period, the product will not leak any hazardous substances and can be recycled according to local regulations.
Warranty and Support
QCY products are covered by an after-sales service commitment in strict accordance with relevant consumer protection laws. The service details are as follows:
Warranty Period
Your QCY AilyBuds Clear earphones come with a 12-month limited manufacturer warranty from the date of purchase. Please retain your purchase receipt as proof of purchase.
Free Service Conditions
- Within 7 days of purchase: If the product experiences a malfunction confirmed as a quality issue by a QCY after-sales service center, you are eligible for repair, replacement, or return services.
- Within 15 days of purchase: If the product experiences a malfunction confirmed as a quality issue by a QCY after-sales service center, you are eligible for repair or replacement services.
- Within 12 months of purchase: If the product experiences a malfunction confirmed as a quality issue by a QCY after-sales service center, you are eligible for repair services.
Warranty Exclusions
The manufacturer's warranty is void under the following circumstances, including but not limited to:
- Malfunctions or damages caused by natural disasters (e.g., earthquakes, lightning), abnormal voltage, or other environmental factors.
- Disassembly, modification, or replacement of non-original parts by the user or unauthorized service providers.
- Damage resulting from failure to follow the user manual or improper use, such as water immersion, corrosion, dropping, crushing, or exposure to abnormal temperature/humidity conditions.
- Use of unspecified adapters or accessories.
Contact Information
- Manufacturer: Dongguan Hele Electronics Co., Ltd.
- Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China
- Phone: 4008-306-708
- Website: www.qcy.com
User Tips
Here are some helpful tips for using your QCY AilyBuds Clear earphones, based on common user inquiries:
- App Integration: For the best experience, download the QCY App. It allows for personalized EQ settings, gaming mode activation, and other custom controls that can significantly enhance your audio experience.
- Connection Stability: If you experience frequent disconnections or sound interruptions, try to minimize interference from other wireless devices (Wi-Fi routers, other Bluetooth devices) in your immediate vicinity.
- Troubleshooting First Steps: Before contacting support for minor issues like one earbud not working or connection problems, always try a factory reset. This often resolves many common glitches.
- Comfort and Fit: Experiment with the earbud placement and slight rotations to find the most comfortable and secure fit for your ears. A good fit is crucial for optimal sound quality and call performance.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Full Instruction Video
For a comprehensive visual guide to setting up and using your QCY AilyBuds Clear earphones, please watch the full instruction video below: