Product Overview
The QCY MeloBuds Pro are advanced wireless earbuds featuring Adaptive Hybrid Active Noise Cancellation (ANC) up to 46dB, Hi-Res Audio with LDAC codec for superior sound quality, and a comfortable in-ear design. They offer multiple noise-cancelling modes, dual transparency modes, crystal-clear calls with 6 ENC microphones, and multipoint connection for seamless switching between devices. With Bluetooth 5.3 and up to 34 hours of playtime, these earbuds are designed for an immersive audio experience.

Image: QCY MeloBuds Pro earbuds in their charging case.
Package Contents
Please check the package for the following items:
- QCY MeloBuds Pro Earbuds
- Charging Case
- Type-C Charging Cable
- Eartips (various sizes)
- User Manual (this document)

Image: Contents of the QCY MeloBuds Pro package.
Setup
1. Initial Pairing
- Take out both earbuds and peel off the isolation film from each.
- Place both earbuds back into the charging case. Close the lid to activate the new device.
- Retrieve both earbuds again.
- Refresh your phone's Bluetooth device list, select "QCY MeloBuds Pro" to pair, and complete the setup.
Note: Opening the charging case turns on the earbuds. If they do not turn on automatically, try again after charging.
2. Multi-Device Connection (Requires QCY APP setting)
- Power on the earbuds to initiate pairing. After connecting to Device A, turn off Bluetooth on the phone. The earbuds will enter pairing mode again.
- Enable Bluetooth on Device B and select "QCY MeloBuds Pro" for pairing.
- On Device A, turn on Bluetooth and click the paired earbuds' name. Successful pairing means the earbuds are now connected to both devices simultaneously.
Note: The multipoint connection function and LDAC audio decoding format cannot be enabled simultaneously.
3. One-Click Device Switching
To switch between connected devices (e.g., from Device A to Device B):
- Open the lid, keep both earbuds in the charging case, and long-press the case button for about 3 seconds. The earbuds will flash white once. Search for them on the new device and click to connect.
4. Wearing the Earbuds
- Properly wear the earbuds on both the left and right sides.
- After wearing them, you can make slight adjustments by rotating to find a comfortable and secure position.
- Ensure the microphone opening is facing downward towards your mouth.
Incorrect earbuds placement may affect both call quality and hearing. If the fit is not snug enough, the ANC (active noise cancellation) effectiveness may decrease. Try adjusting the wearing angle and direction before reactivating the adaptive noise cancellation mode.

Image: Diagram illustrating comfortable wear of the earbuds.
Operating Instructions
1. Power On/Off
- Power On: Open the charging case (with earbuds inside) or, if the earbuds are outside the case, long-press the touch panel for 1.5 seconds.
- Power Off: Place the earbuds into the charging case and close the lid.
2. Touch Controls

Image: Easy control at your fingertips with touch panel functions.
- Answer/End Call: Double-tap the touch panel.
- Reject Call: Long-press the touch panel for 1.5 seconds.
- Play/Pause: Double-tap the touch panel.
- Next Track: Triple-tap the touch panel of the right earbud.
- Voice Assistant: Triple-tap the touch panel of the left earbud.
- Low Latency Mode: Long-press the touch panel of the left earbud for 1.5 seconds.
- ANC/Normal/Transparency Mode Switch: Long-press the touch panel of the right earbud for 1.5 seconds to cycle through modes.
Note: LDAC is activated by default. If you need to disable it, please do so via the QCY app.
3. Charging
Earbuds Charging
- While charging, the red light on the earbuds stays on and turns off when fully charged.
Charging Case Charging
- During charging: The red light stays on.
- Fully charged: The white light stays on.
Charging Case Battery Status Indication
- Sufficient battery: When the charging case is opened, the white light will stay on for 5 seconds before turning off.
- Low battery: When the charging case is opened, the red light will stay on for 5 seconds before turning off.

Image: 34 Hours Playtime and Quick Charge capabilities.
4. QCY App Integration
Download the QCY APP to experience the full range of features and customize your earbuds:
- Pop-up Pairing
- Smart Wearing Detect
- Control Settings
- Dual Connection
- EQ Adjustments
- Find My Earbuds
- ANC Mode Switch
- OTA Upgrade

Image: Screenshots illustrating the QCY app interface and features.
Maintenance
- Do not use oil or other volatile liquids to clean the product.
- Keep the earbuds and charging case dry. Avoid exposure to extreme temperatures (below 0°C or above 45°C).
- Clean the charging contacts and eartips regularly to ensure optimal performance and hygiene.
- Store the earbuds in their charging case when not in use to protect them from dust and damage.
Troubleshooting (FAQ)
1. Only one earbud has sound?
Place both earbuds back into the charging case and close the lid, then retrieve them again to check if both earbuds have sound. If only one earbud still has sound, please perform a factory reset for both earbuds.
2. Phone indicates it cannot connect?
Delete the pairing record on your mobile phone, then search for and pair the earbuds again.
3. No sound during music playback or calls?
On Android phones, there is a settings icon to the right of the Bluetooth connection name. Click to enter, turn off mobile phone audio and media audio, then turn them on again. If there is still no sound, please re-pair the earbuds with the mobile phone.
4. Why is there a delay in videos or games?
Affected by factors such as usage environment, network, and mobile phone codec, there may be varying degrees of delay when the mobile phone transmits audio data to the earbud.

Image: 80ms Ultra-Low Latency for seamless gaming experience.
5. Sound stuttering or intermittent?
If there are many Wi-Fi, 5G, or 4G signals, or high-power electrical appliances nearby during use, it may cause stuttering and intermittent sound. Changing the environment or re-pairing can solve the problem.
6. Factory Reset
To clear pairing records (use in case of connection issues):
- Place the earbuds in the charging case, open the lid, and long-press the charging case button for 10 seconds. The earbuds will flash red 5 times, indicating the reset is complete after the blinking stops.
After the factory reset, follow the initial pairing method to connect for normal usage.
Specifications
| Feature | Specification |
|---|---|
| Product Name | QCY MeloBuds Pro |
| Bluetooth Version | 5.3 |
| Bluetooth Profiles | HFP/A2DP/AVRCP |
| Operating Range | 10 meters (33 feet) |
| ANC Noise Reduction | Up to 46dB (20Hz to 2500Hz) |
| Audio Codecs | LDAC |
| Drivers | 12mm Dynamic Drivers |
| Microphones | 6 ENC Mics with AI-based voice pickup |
| Earbud Battery Capacity | 35mAh |
| Charging Case Battery Capacity | 350mAh |
| Playtime (ANC ON) | Approx. 7.5 hours (single charge), 30 hours (with charging case) |
| Playtime (ANC OFF) | Approx. 8.5 hours (single charge), 34 hours (with charging case) |
| Charging Port | Type-C |
| Waterproof Rating | IPX5 |
| Material | PVC, ABS |
| Compatibility | iOS/Android |
| Earbud Dimensions | 20.7mm x 33.6mm x 23.4mm |
| Charging Case Dimensions | 56.3mm x 51.1mm x 28mm |
All dimensions are measured manually with a deviation of 3-5mm.

Image: Dimensions of the QCY MeloBuds Pro earbuds and charging case.
User Tips
- Optimal ANC: If the fit is not snug enough, the ANC effectiveness may decrease. Try adjusting the wearing angle and direction before reactivating the adaptive noise cancellation mode.
- LDAC Feature: LDAC is activated by default. If you need to disable it, please do so via the QCY app. Note that dual connection is not available when LDAC is active.
- App Features: Download the QCY APP to experience the full range of features such as ambient sound modes, EQ tuning, firmware updates, and more.
- First Use: Ensure you remove the isolation film from new earbuds before their first use.
- Connectivity: For optimal performance, use with compatible smartphone devices. Connecting to a computer may impact the experience due to potential compatibility issues.
- Troubleshooting Connection: If your phone cannot detect the Bluetooth earbuds, either re-enter pairing mode or perform a factory reset on the earbuds. If a phone program error occurs, try turning Bluetooth off and on, or restarting your phone.
- Call Clarity: For crystal-clear calls, ensure the microphone opening is facing downward towards your mouth.
- Battery Life: The battery life may be shorter with the LDAC feature on.
Warranty and Support
Your QCY product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. Please retain your purchase receipt. If any defects occur due to quality issues within the warranty period, kindly bring both the warranty card and the purchase receipt to an authorized dealer for complimentary replacement services.
Warranty Exclusions:
The manufacturer's warranty is void under the following circumstances (but not limited to):
- Improper or inadequate maintenance or modification.
- Accident, misuse, abuse, contamination, or other external causes.
- The use of unspecified adapters and accessories.
- Malfunctions or damages resulting from natural disasters, earthquakes, lightning, abnormal voltage, or environmental factors.
- Damages that occur as a result of failure to follow the instructions in the user manual.
For further support or to view the full user manual in PDF format, please refer to the official QCY website or the provided PDF link: QCY MeloBuds Pro User Manual (PDF)
Manufacturer: Dongguan Hele Electronics Co., Ltd.
Address: No. 325 Yuehui Rd. Daojiao Town Dongguan City Guangdong Province China
Safety Information
General Safety Precautions
- Please carefully read and retain this user manual before using the product.
- If the product is not used for an extended period (more than 2 weeks), please recharge it.
- You must choose a charger produced by a legitimate manufacturer and certified by the national safety authority.
- Do not disassemble or modify the earbuds for any reason, as it may result in fire, electronic breakdown, or permanent damage to the product.
- Do not expose the product to extremely low or high temperatures (below 0°C or above 45°C).
- Do not use the product indicator light near the eyes of children or animals.
- Do not use the product during thunderstorms, as it may cause abnormal operation and increase the risk of electric shock.
- Do not use oil or other volatile liquids to clean the product.
- Using this device for long periods at high volume carries a risk of hearing damage. Please manage your listening time and volume responsibly.
Battery Safety
- Do not disassemble or modify the battery, insert foreign objects, expose it to high temperatures, or immerse it in water or other liquids to prevent battery leakage, overheating, ignition, or explosion. Battery replacement should only be done by the manufacturer.
- Do not drop, crush, or puncture the battery. Prevent external pressure that may lead to internal short circuits and overheating.
Product Hazardous Substances Name and Content
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Outer Casing | O | O | O | O | O | O |
| Circuit Board Assembly | X | O | O | O | O | O |
| Battery | O | O | O | O | O | O |
| Charging Cable | X | O | O | O | O | O |
| Accessories | O | O | O | O | O | O |
O: Indicates that the hazardous substance content in all homogeneous materials of this part is below the limit requirements specified in GB/T26572.
X: Indicates that the hazardous substance content in at least one homogeneous material of this part exceeds the limit requirements specified in GB/T 26572.
Environmental Protection Use Period
Under normal use conditions, the environmental protection use period of this product is 10 years. During this period, the product will not leak any hazardous substances. This product can be recycled and must be handled according to local regulations.