XiNOWy V6 PRO Motorcycle Helmet Intercom User Manual

1. Product Overview

1.1 Key Features

• Bluetooth 5.1 Connectivity: Seamless and stable audio transmission.
• Full Duplex Intercom: Supports communication between up to 6 riders, with 2 riders talking simultaneously.
• Extended Intercom Range: Up to 1200 meters (3937 feet) in open environments.
• Waterproof Design: IP65 rated, ensuring functionality in wet conditions.
• Noise Reduction: DSP cancellation for clear audio at speeds up to 120km/h.
• HD Call Quality: Built-in chip reduces wind noise and ensures clear voice.
• Music Player: Built-in stereo music playback, compatible with GPS/MP3 audio navigation.
• Automatic Call Reception: Automatically answers phone calls after 5 seconds.
• Long Battery Life: 850mAh Li-Polymer battery provides up to 29 hours talk time, 27 hours music time, and 360 hours standby time.
• Versatile Application: Suitable for various helmet types (Modular, Motocross, Open face, Full Face, Flip Up Helmet) and activities like motorcycling, skiing, karting, ATV sports, and more.

1.2 Package Contents

• Helmet Intercom (1 or 2 units, depending on purchase)
• Headset (1 or 2 units)
• USB Cable (1 or 2 units)
• Screwdriver (1 or 2 units)
• Clip (1 or 2 units)
• Metal Clip Replacement (Gift, 1 or 2 units)
• User Manual (1 or 2 units)

1.3 Device Layout

2. Setup Instructions

2.1 Installation on Helmet

1. Attach the Clip: Loosen the screws of the clip and install it securely on your helmet. Ensure it is fixed firmly.

   

2. Mount the Intercom: Install the V6 PRO intercom unit onto the attached clip.

   

3. Organize Cables and Microphone: Organize the internal cables and tuck them into the helmet foam for comfortable wear. Use the provided Velcro stick inside your helmet to secure either the stick microphone or soft microphone, depending on your preference and helmet type.

   

3. Operating Instructions

3.1 Power On/Off

• Power On: Long press the MOTOR button for approximately 2 seconds until the main device light flashes. Release the button.
• Power Off: Short press the Power Off button (button 9 in Figure 1).

3.2 Connecting with a Mobile Phone (Bluetooth Pairing)

1. Ensure the V6 PRO intercom is powered off.
2. Long press the Phone button (button 6 in Figure 1) for 5 seconds until both red and blue lights flash alternately. This indicates pairing mode.
3. On your mobile phone, enable Bluetooth and search for "V6".
4. Select "V6" to connect. Once successfully paired, the intercom's blue light will flash slowly.
5. (If your GPS/MP3 device supports Bluetooth, follow the same pairing procedure.)

3.3 Phone Call Management

• Receiving a Call: When a call comes in, the device will automatically answer after 5 seconds if no operation is performed.
• Refusing a Call: When a call comes in, press the Phone button (button 6 in Figure 1) to end the call.
• Last Number Redial: After connecting to your phone, long press the Phone button (button 6 in Figure 1) for 3 seconds. The device will automatically dial the last outgoing call number.

3.4 Music Playback

• Play/Suspend Music: Short press the Phone button (button 6 in Figure 1). (95% compatible with cellphone music players).
• Choose Music:
  • Previous Music: Long press Volume - (button 8 in Figure 1) for 2 seconds.
  • Next Music: Long press Volume + (button 7 in Figure 1) for 2 seconds.

3.5 Volume Control

• Increase Volume: Short press Volume + (button 7 in Figure 1).
• Decrease Volume: Short press Volume - (button 8 in Figure 1).

3.6 Charging

• When charging, the red indicator light will be continuously on.
• Once fully charged, the red indicator light will turn off.

3.7 Clear Pairing (Restore Factory Settings)

• Press the Phone button (button 6 in Figure 1) and the B button (button 2 in Figure 1) simultaneously. The indicator light will flash red three times and then blue once, indicating that all previous pairings have been cleared.

4. Intercom Pairing and Operation

The V6 PRO supports up to six riders using the device, with two riders able to talk simultaneously. One main device can be paired with up to five sub-devices. The main device can select which sub-device (A, B, C, D, or E) to communicate with.

Note:

• The main device cannot communicate with all five sub-devices simultaneously; it can only talk to one selected sub-device at a time.
• The other five sub-devices cannot communicate directly with each other.
• When using an old version of the machine as the main unit, it cannot be successfully paired with a new version. The new version must be used as the main unit to pair with an old version.

4.1 Pairing with Sub-Devices (A, B, C, D, E)

The pairing process involves pressing specific buttons on both the main device and the sub-device you wish to pair.

1. Pairing Main Device with Sub-Device A:
   • Ensure both the main device and Sub-Device A are powered off.
   • Long press the MOTOR button (button 1 in Figure 1) on the main device and the MOTOR button on Sub-Device A simultaneously for about 5 seconds. Both devices' red and blue lights will flash.
   • One device will automatically initiate a pairing connection, and its blue light will flash quickly.
   • After a short while, both devices' blue lights will flash slowly and simultaneously, indicating successful pairing. They can now communicate.
   • To pair another sub-device, first press the MOTOR button on the main device to disconnect from Sub-Device A.
2. Pairing Main Device with Sub-Device B:
   • Ensure both the main device and Sub-Device B are powered off.
   • Long press the B button (button 2 in Figure 1) on the main device and the B button on Sub-Device B simultaneously for about 5 seconds. Both devices' red and blue lights will flash.
   • Follow the same light sequence as for Sub-Device A to confirm successful pairing.
   • To pair another sub-device, first press the B button on the main device to disconnect from Sub-Device B.
3. Pairing Main Device with Sub-Devices C, D, and E:
   • The pairing method for Sub-Devices C, D, and E is identical to that of A and B. Use the corresponding C, D, or E button on the main device and the respective sub-device.

Simplified Pairing Overview:

The MOTOR/B/C/D/E buttons on the main device are used to pair with the corresponding MOTOR/B/C/D/E buttons on the five other sub-devices. After pairing, press the corresponding button on the main device to initiate communication with that specific sub-device.

4.2 Connecting to Paired Devices

Once devices are paired, you do not need to re-pair them for subsequent use. Simply click the corresponding MOTOR/B/C/D/E button on the main device to connect and talk with the desired sub-device.

5. Specifications

6. Maintenance

• Keep the device clean and dry.
• Avoid exposing the device to extreme temperatures.
• Do not attempt to disassemble or modify the device, as this will void the warranty.
• Use only the provided or recommended charging cable and power adapter.
• Ensure the earphone jack is fully inserted to maintain waterproof integrity, especially in rainy conditions.

7. Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect to the charger and check the red indicator light.
• Cannot pair with mobile phone:
  1. Ensure the intercom is in pairing mode (red and blue lights flashing alternately).
  2. Check that Bluetooth is enabled on your phone and it's searching for devices.
  3. If issues persist, clear all previous pairings on the intercom (see section 3.7) and try again.
• Intercom pairing issues:
  1. Ensure both devices are powered off before initiating pairing.
  2. Follow the specific button press sequences for each sub-device (see section 4.1).
  3. If pairing fails, clear all previous pairings on both devices and attempt pairing again.
  4. Remember that an old version of the intercom cannot be the main unit when pairing with a new version.
• Poor communication distance: For optimal communication range, use the device in open areas with minimal obstructions.
• No sound from headset: Ensure the headset is properly connected to the earphone interface.

8. User Tips

• Helmet Compatibility: The V6 PRO is designed to be compatible with a wide range of helmet types including Modular, Motocross, Open face, Full Face, and Flip Up Helmets. For specific helmet models like Scorpion Exo, physical fitment of the clip and microphone should be verified.
• Microphone Choice: Utilize the provided Velcro to choose between the stick microphone (often better for open-face helmets) or the soft microphone (often better for full-face helmets) for optimal audio clarity.
• Package Options: The V6 PRO is available in single or double packs. Ensure you select the correct quantity based on your needs.
• Headset Included: The package includes the necessary headphones and microphone for immediate use.
• Optimal Use: While the device supports music playback, for maximum riding safety, it is recommended to minimize distractions and focus on the road.

9. Safety Precautions

• Installation: Ensure correct installation, especially in rainy conditions, by fully inserting the headphone jack to prevent water ingress.
• Charging: Use only the standard charger provided to ensure battery life and prevent damage.
• Riding Safety: It is not recommended to listen to music while riding to maintain full awareness of your surroundings.
• Device Operation While Riding: Do not manually operate the device buttons while riding; prioritize safety.
• Communication Distance: For optimal communication distance, it is recommended to use the device in open areas.

10. Regulatory Information

10.1 FCC/IC Compliance Statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. L'appareil ne doit pas produire de brouillage.
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

11. Warranty and Support

Your XiNOWy V6 PRO Intercom is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. Contact information can typically be found on the product packaging or the seller's website.

A PDF version of this user manual is available for download. Please refer to the product page for the link: User Manual (PDF)