GMAIPOP Dash Cam

Contents

GMAIPOP 1080P WiFi Dual Camera Dash Cam User Manual

Model: Dash Cam

Brand: GMAIPOP

1. Important Safety Information & Tips

Please read and understand all warnings and safety instructions before operating your dash cam.

1.1 Battery & Charger

  • The dash cam's built-in 150mAh battery is primarily for maintaining and saving settings. It requires a constant power source (car charger or USB) to operate. If power is interrupted, the unit will shut down.
  • Always use the original car charger provided to prevent faults or incompatibility. Mobile phone chargers or USB cables are not supported and may cause malfunction.

1.2 High Temperature Cautions

  • Do not leave this product in environments where the temperature may exceed 70°C (160°F) for extended periods.
  • When using a sunshade, avoid placing the dash cam between the windshield and sunshade, as this can lead to heat buildup and damage.

1.3 SD Card Insertion

The dash cam is designed to use a Micro SD card (Class 10 or higher recommended, up to 64GB). Ensure the card is inserted in the correct direction as shown in the diagram below.

Diagram showing correct SD card insertion direction

Image: Correct direction for Micro SD card insertion.

1.4 Resetting the Dash Cam

If you encounter issues such as the dash cam freezing, getting stuck, or experiencing format errors, a quick reset can often resolve the problem. Use a small tool to press the reset hole.

2. Product Overview

Familiarize yourself with the dash cam's components and controls.

Diagram of Dash Cam with labeled parts

Image: Dash Cam overview with key features highlighted.

2.1 Dash Cam Components

  1. Power/OK Button: Turns the camera on/off, starts/stops recording, plays/pauses videos, enters/saves menu settings.
  2. Down Button: Scrolls down in menu, switches front/cabin camera display, scrolls to next video file, long-press to turn on/off WiFi.
  3. Up Button: Scrolls up in menu, mutes audio recording, long-press to enter file management.
  4. Menu Button (M): Long-press to enter/exit menu (when not recording), short-press to lock current video file (when recording).
  5. RESET Hole: Used to reset the device.
  6. AV-IN Port: For connecting a cabin camera (if applicable).
  7. TF Card Slot: For inserting the Micro SD card.
  8. Mini USB Power Interface: For connecting the car charger.

3. Installation

3.1 Installing the Electrostatic Film

  1. Clean the Windshield: Thoroughly clean the area on your windshield where the dash cam will be mounted using the provided accessories. A clean surface is crucial for proper adhesion.
  2. Apply Film: Peel off the cover marked "1" (usually in red) from the electrostatic film. Carefully apply the film to the cleaned glass.
  3. Remove Second Cover: After installing the film, peel off the cover marked "2" (usually in green).

Important Note: It is very important to clean the glass. If the glass is dirty, the bracket may easily detach.

Steps for applying electrostatic film to windshield

Image: Applying the electrostatic film to the windshield.

3.2 Installing the Bracket

  1. Remove the protective film from the bracket cover.
  2. Place the bracket onto the electrostatic film on the windshield.

Important Note: Do not remove or take off the dash cam after installation to ensure stable mounting.

3.3 Connecting the Car Charger Cable

Connect the car charger to the dash cam's Mini USB power port. Route the cable according to one of the wiring diagrams below.

Wiring diagrams for dash cam power cable

Image: Two methods (A and B) for routing the power cable in a car.

  1. Hide Cable in Top Panel: Tuck the cable into the top panel lining.
  2. Route Along Side Panel: Gently break the side panel slightly and insert the cable. Be extremely careful if your vehicle has side curtain airbags; ensure the cable does not interfere with their deployment.
  3. Insert into Door's Sealing Tape: Continue routing the cable along the door's sealing tape.
  4. Connect to Cigarette Lighter: Plug the car charger into the cigarette lighter socket. Ensure the cigarette lighter is clean for a secure connection. Check if the car charger's red indicator light is on.
Images showing cable routing steps

Image: Detailed steps for routing the power cable.

Important Airbag Warning: If your vehicle has side curtain airbags, be very careful when running cables along your vehicle windows. Ensure you are not running the cable past any of the airbags, as this can prevent the airbags from deploying in an accident.

4. Operating Instructions

4.1 Power On/Off & Recording

  • Turn On/Off: Long-press the Power/OK button for 2-3 seconds.
  • Start/Stop Recording: Short-press the Power/OK button once.

4.2 Display & Audio Control

  • Switch Camera Display: Short-press the Down button to switch between front camera and cabin camera views during recording.
  • Mute Audio: Short-press the Up button during recording to mute audio.

4.3 WiFi & App Control

The dash cam features built-in WiFi for smart app control and footage sharing.

Dash cam with phone showing WiFi control and social sharing

Image: Smart APP control with WiFi for real-time viewing and sharing.

  1. Download the App: Search for "Viidure" or "Framefox" in Google Play Store (Android) or Apple App Store (iOS) and download the app. Both apps can be used, but Viidure offers more complete functions.
  2. Turn on Dash Cam WiFi:
    Method 1: Long-press the Up button while the dash cam is in working status.
    Method 2: Long-press the Menu button to enter the settings menu. Use the Up and Down buttons to find "WiFi & APP" setting and turn it on. The app download QR code is also available in the menu bar.
  3. Connect Phone to Dash Cam WiFi: On your mobile phone, go to WiFi settings. Search for the dash cam's WiFi network (e.g., "D50 ******"). Enter the default password: 12345678. Ensure you connect to "WLAN" (WiFi), not Bluetooth.
  4. Operate via App: Once connected, you can use the app to view real-time footage, download videos, take photos, and access camera settings.
Diagram showing how to connect to WiFi and app interface

Image: Steps for connecting to the dash cam's WiFi and app interface.

Important Note: When the WiFi is connected and you are operating the app, you cannot operate the dash cam using its physical buttons.

5. Playback Videos

There are three methods to playback recorded videos:

  1. Playback on PC: Remove the Micro SD card from the dash cam and insert it into a card reader connected to your computer. You can then play the video files directly on your PC.
  2. Download and Playback via WiFi: Connect your phone to the dash cam's WiFi using the app (refer to Section 4.3). You can then download the video files to your phone for playback.
  3. Playback on the Dash Cam:
    a. Long-press the Down button to enter playback mode.
    b. Use the Up and Down buttons to scroll through and select video files.
    c. Long-press the Menu button to delete or protect the current file.
    d. Short-press the Down button to exit playback mode.

6. Features & Specifications

6.1 Key Features

  • 1080P Full HD Recording: Captures clear and detailed footage.
  • Dual Camera System: Records both the front (170° wide angle) and inside cabin (140° wide angle) simultaneously.
  • WiFi Connectivity: Enables smart app control, real-time viewing, and footage sharing to social media.
  • Super Night Vision: Equipped with F2.0 large aperture, 6-glass lens, and WDR (Wide Dynamic Range) technology for enhanced clarity in low-light conditions.
  • G-Sensor: Automatically locks and saves video footage upon detecting a collision, preventing overwriting.
  • Loop Recording: Automatically overwrites the oldest unlocked recordings when the memory card is full, ensuring continuous recording.
  • 24-Hour Parking Monitor: Monitors your vehicle for damage when parked (requires hardwire kit, not included).
  • Motion Detection: Records when motion is detected.
  • Built-in Screen: HD IPS display for true color and clear viewing.
  • Audio Recorded: Yes.
  • OSD Language Support: Arabic, Chinese (Simplified), Chinese (Traditional), English, French, German, Hebrew, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish.
Dash cam night vision features

Image: Super Night Vision with 6-Glass Lens, WDR Tech, and f1.6 Aperture.

Front and cabin wide-angle view diagram

Image: Front 170° and Cabin 140° wide-angle view coverage.

Different screen switching modes

Image: Five different screen switching modes for viewing camera feeds.

6.2 Technical Specifications

AttributeSpecification
Camera Resolution1920x1080
Pixels200 Mega
View Angle170° (Front), 140° (Cabin)
ApertureF2.0
Video CodeH.264
Frames Per Second30
Imaging SensorAR0330
Display TypeIPS
Screen Ratio16:9
Built-in ScreenYes
Touch ScreenNo
Loop-Cycle RecordingYes
Audio RecordedYes
NightShot FunctionYes
Special FeaturesG-Sensor, Motion Detection, Real Time Surveillance, WiFi Function, 3D DNR
Max External Memory64G
Memory Card Required SpeedClass 10
Battery TypeBuilt-In (150mAh)
Power SourceCorded Electric
Cable Length3.5m
Weight0.35kg
Dimensions (W x H x D)As shown in product size diagram
OSD LanguageMultiple (Arabic, Chinese, English, French, German, Hebrew, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish)
CertificationCE, FCC
Product size diagram with measurements

Image: Product dimensions (W x H x D).

7. Maintenance

  • Cleaning: Regularly clean the camera lenses and screen with a soft, dry cloth to ensure clear recordings.
  • SD Card Management: For optimal performance, it is recommended to format the Micro SD card periodically (e.g., once a month) using the dash cam's menu settings. This helps prevent data corruption and ensures smooth loop recording.
  • Temperature: Avoid exposing the dash cam to extreme temperatures, both hot and cold, to prolong its lifespan.

8. Troubleshooting & FAQ

8.1 WiFi Connectivity Issues

Q: What is the dash cam's WiFi for?
A: The dash cam's WiFi creates a hotspot designed solely for controlling the dash cam via its app and downloading video files. It cannot be used for internet browsing.

Q: Why does the WiFi keep disconnecting?
A: This can happen due to several reasons:

  • Phone Settings: Ensure your phone's settings allow connections to the dash cam's WiFi network.
  • Auto WiFi Features: Some phones have strong auto-WiFi connection features (e.g., wireless CarPlay) that may automatically disconnect from the dash cam's WiFi.

Solution:

  • Forget the dash cam's WiFi network on your phone and reconnect.
  • Ensure your phone's settings are correct for WiFi connections.
  • If you have strong auto-WiFi features, temporarily turn them off when using the dash cam's WiFi.

8.2 General Issues

  • Dash Cam Freezes or Gets Stuck: Press the reset hole with a small tool.
  • Format Error: Press the reset hole with a small tool.
  • Screen Doesn't Display / WiFi Disconnects When Using App: When the dash cam is connected to your phone via WiFi and you are operating the app, the dash cam's physical buttons become inactive, and the screen may not display or WiFi may disconnect if you try to use the buttons. This is normal behavior; control should be exclusively via the app during WiFi connection.

9. User Tips

  • Power Source is Essential: Remember that the internal battery is only for settings. The dash cam requires continuous power from the car charger to function.
  • Use Original Charger: Always use the provided car charger to avoid power issues or damage. Do not use standard phone chargers or USB cables.
  • Proper Cabin Camera Alignment: When installing, ensure the cabin camera is positioned correctly to capture the interior as intended.
  • Parking Monitor Setup: For 24-hour parking monitoring, a hardwire kit (not included) is required to provide continuous power to the dash cam when the vehicle is off.
  • Audio Recording: The dash cam records audio by default. If you prefer not to record audio, you can mute it using the Up button during recording.
  • PDF User Manual: A detailed PDF user manual is available for download. You can find it at: GMAIPOP Dash Cam User Manual (PDF)

10. Warranty & Support

For any product issues, technical support, or warranty inquiries, please contact the GMAIPOP professional after-sales team at ricardozed23@gmail.com.

Please refer to the official seller's policies for specific warranty terms and conditions.

Made in China

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.