1. Introduction
The HobbyEagle A3 Pro and A3 Pro V2 are high-performance and functional 6-axis gyros and stabilizers designed for R/C airplanes. These systems enhance flight stability and control, making flying easier and more comfortable for various R/C airplane types. Featuring a 32-bit MCU and high-precision 6-axis MEMS sensor, they offer reliable performance and support multi-protocol serial receivers for simplified connections.
2. Safety Information
Please read and understand all instructions before operating this device. Improper use can lead to damage to the product, property, or serious injury.
- Always ensure all connections are secure and correct before powering on your aircraft.
- Operate your R/C aircraft in open areas, away from people, buildings, and other obstacles.
- Regularly inspect all components for damage or wear.
- This product is not a toy. Recommended for users aged 14 and above.
3. Package Contents
Upon opening your package, please verify that all the following items are included:
- 1x HobbyEagle A3 Pro or A3 Pro V2 Flight Controller Unit
- Connection Cables (various lengths)
- Double-sided Mounting Tape
- Note: An optional data cable for firmware upgrades is not included in the standard package and must be purchased separately.
4. Specifications
| Feature | Description |
|---|---|
| Model | A3 Pro / A3 Pro V2 |
| Processor | 32-bit MCU |
| Sensor | High-precision 6-axis MEMS sensor |
| Supported Receivers | PWM, PPM, Futaba S.Bus (FrSky SBUS, RadioLink SBUS, WFLY WBUS), Spektrum DSM/DSMX (1024/2048), Spektrum SRXL, Multiplex SRXL / JR XBUS Mode B, Graupner SUMD, FlySky iBus |
| Flight Modes | 6 (GYRO OFF, NORMAL, LOCK, ANGLE, LEVEL, HOVER) |
| Wing Types | Standard Fixed-wing, Delta-wing (Flying-wing), V-tail |
| Dimensions (L x W x H) | 11 cm x 7 cm x 3 cm (approx.) |
| Weight | 0.065 kg (approx.) |
| Material | Metal (internal components) |
| Batteries Included | No |
| Recommended Age | 14+ years |
5. Setup
5.1 Mounting the Flight Controller
Mount the flight controller securely to the airframe using the provided double-sided tape. Ensure it is level and oriented correctly. The arrow on the unit should point towards the front of the aircraft.
5.2 Port Description
Refer to the table below for a description of the input and output ports on the flight controller:
5.3 Standard Receiver Connection (PWM)
For standard PWM receivers, connect the flight controller to your receiver and servos as shown in the diagram below. Ensure correct polarity for all connections.
5.4 Serial Receiver Connection
For serial receivers (PPM, S.Bus, DSM/DSMX, etc.), connect the flight controller to your serial receiver and servos according to the diagram and protocol table below. Note that when operating in PPM or serial receiver mode, the 'THR Out / AIL' port provides the throttle channel output for the ESC or throttle servo.
5.5 Initial Configuration
After connecting all components, power on the aircraft. The LED indicator on the flight controller will show its status. Refer to the official HobbyEagle user manual for detailed instructions on initial calibration, setting the correct wing type (standard fixed-wing, delta-wing, or V-tail), and assigning flight modes to your transmitter switches.
6. Operating Modes
The HobbyEagle A3 Pro / A3 Pro V2 offers 6 distinct flight modes to suit various flying preferences and conditions:
- GYRO OFF Mode: The gyroscope and stabilizer functions are completely disabled. The aircraft responds directly to pilot input.
- NORMAL Mode: Provides basic stabilization, assisting in maintaining level flight and smoothing out turbulence.
- LOCK Mode: Also known as Heading Hold mode, it locks the aircraft's attitude, resisting external forces and maintaining its last commanded orientation.
- ANGLE Mode: Limits the maximum bank and pitch angles, preventing the aircraft from entering extreme attitudes. Ideal for beginners.
- LEVEL Mode: Automatically levels the aircraft when control sticks are released, providing a self-leveling function.
- HOVER Mode: Designed for specific aircraft types (e.g., VTOL) to assist in maintaining a stable hover.
7. Adjustments
The flight controller allows for precise adjustments to optimize performance:
- Basic Gain Adjustment: Separate gain adjustments are available for Aileron, Elevator, and Rudder. These can be fine-tuned to match your aircraft's characteristics and your flying style.
- Remote Master Gain: A master gain control can be assigned to a channel on your transmitter, allowing for real-time adjustment of overall stabilization intensity during flight.
- Sub Trim and Travel Limit: These settings are supported for fine-tuning control surface neutral positions and maximum travel, ensuring optimal control response.
8. Care and Maintenance
- Keep the flight controller clean and dry. Avoid exposure to moisture, dust, and extreme temperatures.
- Ensure all wiring connections remain secure and free from damage.
- If the casing appears loose, a small amount of hot glue can be used to secure it, protecting the internal components.
8.1 Firmware Update
The firmware of the A3 Pro / A3 Pro V2 is upgradable. To update the firmware, an optional data cable is required. Visit the official HobbyEagle website for the latest firmware versions and detailed update instructions.
9. Troubleshooting
- Aircraft Hunting/Oscillation: If the aircraft exhibits unwanted hunting or oscillation, particularly in stabilized modes like Trainer mode, reduce the gain settings for the affected control surfaces. Fine-tuning gains is crucial for stable flight.
- Casing Not Intact: If the flight controller's casing is not perfectly secure, apply a small amount of hot glue to hold it together and protect the internal electronics.
- Serial Number Registration Issues: If you encounter problems with serial number registration (e.g., 'already registered 3 times'), contact HobbyEagle customer support directly for assistance.
10. User Tips
- Beginner-Friendly: The A3 Pro/V2 can significantly ease the learning curve for new pilots. Its basic stabilization modes perform well even in moderate wind conditions.
- Trainer Mode Considerations: While effective, Trainer mode is best utilized in calm weather. In strong winds, it may require careful gain adjustments to prevent over-compensation.
- Customization: Take advantage of the detailed settings available to customize the flight controller's response to your specific aircraft and personal flying style.
- Spektrum Compatibility: The gyro is confirmed to work well with Spektrum systems, including DSMX satellites, integrating smoothly with various transmitter setups.
11. Video Tutorial
Watch this official product video for a visual overview of the HobbyEagle A3 Pro/V2 Flight Controller and its features, including installation and basic setup guidance.
12. Warranty & Support
For detailed warranty information, technical support, or specific inquiries regarding your HobbyEagle A3 Pro / A3 Pro V2 Flight Controller, please refer to the official HobbyEagle website or contact their customer service department.
For the most comprehensive instructions and advanced configurations, please download the official user manual from the HobbyEagle website: HobbyEagle A3ProV2 User Manual (PDF)