Introduction
The GEARELEC C2 is a state-of-the-art Bluetooth intercom headset designed for motorcycle helmets, offering seamless communication and entertainment for riders. Featuring Bluetooth 5.3 technology, IPX7 waterproofing, and a 2800mAh battery, it provides reliable performance for solo rides or two-rider communication up to 50 meters. Enjoy crystal-clear audio, voice control, and customizable light effects for an enhanced riding experience.
Package Contents
Please check the box for the following items:
- 1 x C2 Intercom Main Unit
- 1 Set x Speakers
- 1 x Hard Microphone
- 1 x Soft Microphone
- 1 x Mounting Clamp
- 1 x Adhesive Mount
- 4 x Speaker Fasteners (Velcro pads)
- 2 x Mic Fasteners (Velcro pads)
- 1 x USB-C Charging Cable
- 2 x Adhesive Mount Fasteners (for main unit)
- 1 x User Manual
Product Overview
The GEARELEC C2 unit features a sleek design with intuitive controls and customizable lighting. It is built for durability and ease of use in various riding conditions.
Key features include:
- Bluetooth 5.3: For stable and efficient wireless connections.
- 2-Rider Communication: Intercom mode for rider-to-passenger or rider-to-rider communication within 50 meters.
- Auto Answer: Optional automatic call answering for safety.
- Talk & Listen to Music Simultaneously: Enjoy music while maintaining intercom communication.
- Hi-Fi Stereo Music: Enhanced audio quality with 3D stereo surround sound.
- Voice Control: Activate your smartphone's voice assistant.
- IPX7 Waterproof: Designed to withstand rain and wet conditions.
- 7 Colors Light Effect: Customizable LED lights on the unit.
Setup and Installation
Follow these steps to install your GEARELEC C2 headset into your helmet:
- Choose Mounting Method:
- Clamp Mount: Slide the mounting clamp onto the edge of your helmet shell. Ensure it is securely fastened.
- Adhesive Mount: Clean the desired mounting area on your helmet. Peel off the backing from the adhesive mount and firmly press it onto the helmet. Allow sufficient time for the adhesive to bond before attaching the intercom unit.
- Attach Main Unit: Slide the GEARELEC C2 main unit onto the chosen mount until it clicks securely into place.
- Install Speakers:
- Use the provided Velcro fasteners to attach the speakers inside your helmet, positioning them directly over your ears for optimal sound.
- Route the speaker wires neatly under the helmet padding to avoid interference.
- Install Microphone:
- Hard Microphone: Recommended for open-face or modular helmets. Attach it to the inside of the helmet near your mouth using Velcro.
- Soft Microphone: Recommended for full-face helmets. Attach it to the inside of the chin bar using Velcro.
- Connect the microphone cable to the main unit.
- Cable Management: Ensure all cables are tucked away and do not obstruct your vision or helmet functionality.
Operating Instructions
Power On/Off
- Power On: Press and hold the Power button for approximately 3 seconds until the indicator light turns on.
- Power Off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.
Bluetooth Pairing (with Smartphone)
- Ensure the C2 unit is powered off.
- Press and hold the Power button for about 5-7 seconds until the indicator light flashes rapidly (usually blue/red alternating), indicating pairing mode.
- On your smartphone, go to Bluetooth settings and search for "GEARELEC C2".
- Select "GEARELEC C2" to connect. Once paired, the indicator light will change to a slow blue flash.
Intercom Pairing (2-Rider Communication)
The C2 supports communication between two units within a 50-meter range.
- Ensure both C2 units are powered off.
- On both units, press and hold the Intercom button (often marked 'M' or a dedicated intercom button) for approximately 5-7 seconds until the indicator lights flash rapidly.
- The units will automatically search and pair with each other. Once connected, the indicator lights will change to a slow blue flash on both units.
- To initiate intercom communication, briefly press the Intercom button on either unit.
- To end intercom communication, briefly press the Intercom button again.
Call Management
- Auto Answer: The unit can be set to automatically answer incoming calls after a few rings. This feature can usually be toggled on/off via a specific button combination (refer to the included manual for exact steps).
- Manual Answer: Briefly press the Call button to answer an incoming call.
- Reject Call: Press and hold the Call button for 3 seconds to reject an incoming call.
- End Call: Briefly press the Call button to end an active call.
Music Playback
- Play/Pause: Briefly press the Play/Pause button.
- Next Track: Press the Next Track button.
- Previous Track: Press the Previous Track button.
- Volume Adjustment: Use the Volume Up/Down buttons.
Voice Assistant
To activate your smartphone's voice assistant (e.g., Siri, Google Assistant), briefly press the Voice Assistant button (refer to the included manual for exact button location).
Light Effects
The C2 unit features built-in colorful lights with four modes: orange, green, white, and multi-color. To switch between light modes, briefly press the Light Effect button (refer to the included manual for exact button location).
Charging
Connect the provided USB-C cable to the charging port on the C2 unit and to a USB 5V 1A-2A power source. The indicator light will show charging status (e.g., red for charging, blue for fully charged). A full charge takes approximately 3 hours.
Maintenance
- Cleaning: Use a soft, damp cloth to wipe the exterior of the unit. Do not use harsh chemicals or abrasive cleaners.
- Water Exposure: While the unit is IPX7 waterproof, avoid prolonged submersion. Ensure the USB-C port cover is securely closed when not charging to maintain water resistance.
- Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, charge the unit regularly and avoid fully discharging it for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | Low battery. | Charge the unit for at least 3 hours. |
| Cannot pair with smartphone. | Unit not in pairing mode; Bluetooth off on phone; too many paired devices. | Ensure unit is in pairing mode (rapid flashing light). Turn phone's Bluetooth off and on. Forget previous pairings on phone and retry. |
| Intercom not connecting. | Units not in intercom pairing mode; out of range. | Ensure both units are in intercom pairing mode. Move closer to each other (within 50m). |
| Intercom volume too low/high during call. | Volume settings. | Adjust volume using the dedicated volume buttons on the unit during an active intercom call. |
| Lights are always on/cannot change. | Incorrect button press; unit malfunction. | Refer to the manual for the correct Light Effect button. If issue persists, try resetting the device (if applicable, check manual). |
| Cannot connect to two phones simultaneously. | The C2 model supports connection to one phone at a time for primary functions. | This model is designed for single phone connection. Disconnect from one phone before attempting to connect to another. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | C2 |
| Brand Name | GEARELEC |
| Item Type | Helmet Headset |
| Bluetooth Version | 5.3 |
| Connection Mode | Bluetooth |
| Maximum Intercom Distance | 50m |
| Maximum Number of Speakers | 2 (for intercom) |
| Support Intercom | Yes |
| Waterproof Level | IPX7 |
| Battery Capacity | 2800mAh Polymer Battery |
| Battery Included | Yes |
| Working Hours | 170 hours |
| Standby Time | 1,000 hours |
| Fast Charging Time | 3 hours |
| Charging Port | USB Type-C |
| Charging Voltage | USB 5V 1A-2A |
| Special Features | Waterproof, Voice Control, Universal Pairing Function, Noise Reduction |
| Applicable Helmet Type | Universal |
| Working Temperature | -55~+125 degrees Celsius |
| Product Size | 9.5cm x 5cm x 2cm (3.74" x 1.97" x 0.79") |
| Product Weight | 143.7g |
| Certification | CE |
User Tips
- Intercom Volume: If you find the intercom volume during a call is not ideal, adjust it directly using the volume buttons on the unit while the intercom is active. This allows for real-time adjustment separate from music volume.
- Phone Connectivity: The C2 is designed to connect to one phone at a time. If you're having trouble connecting, ensure it's not already paired with another device.
- Light Control: The colorful lights can be cycled through different modes or turned off. Consult the manual for the specific button press to control the lights if they are always on or not changing as desired.
- Range Awareness: The intercom range is specified at 50 meters. For optimal communication, try to stay within this distance, especially in areas with obstructions.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official GEARELEC website. Keep your proof of purchase for warranty claims.