1. Introduction
The EPEVER Tracer AN series MPPT Solar Charge Controller is designed for advanced solar power management. Utilizing a common negative design and a sophisticated MPPT (Maximum Power Point Tracking) control algorithm, this controller ensures efficient and reliable operation. It features an LCD display for real-time status monitoring, making it both user-friendly and practical. The enhanced MPPT algorithm minimizes power loss and tracking time, allowing the PV array to quickly reach its maximum power point and extract optimal energy from solar modules under various conditions. This can increase energy utilization in solar systems by 10%-30% compared to traditional PWM charging methods. The controller also includes automatic charging power and current limitation functions, improving stability even with oversized PV modules or in high-temperature environments. Professional protection chips for communication ports further enhance reliability, meeting diverse application requirements.
2. Features
- Advanced MPPT technology, with efficiency no less than 99.5%.
- Ultra-fast tracking speed and guaranteed tracking efficiency.
- Advanced MPPT control algorithm to minimize the maximum power point loss rate and time.
- Wide MPP operating voltage range.
- High-quality components ensuring optimal system performance, with maximum conversion efficiency of 98%.
- Accurate recognition and tracking of multiple-peaks maximum power point.
- Utilizes international brands like ST and IR components for high quality and low failure rate, which can ensure the product’s service life.
- Charging power and current limitation function.
- Compatible with both lead-acid and lithium-ion batteries.
- Battery temperature compensation function.
- Real-time energy statistics function.
- Overheating power reduction function.
- Multiple load work modes.
- The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.
- With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
- Monitor and set the parameters via mobile phone APP or PC software.
- Full-load operation without any drop in capacity within the range of working environment temperature.
- Extensive electronic protection.
3. Product Overview
Familiarize yourself with the components and connections of your EPEVER Tracer MPPT Solar Charge Controller.

This image shows the front of the EPEVER Tracer MPPT Solar Charge Controller, highlighting the LCD DISPLAY, SELECT button, ENTER button, REMOTE TEMP. SENSOR port, SOLAR PANEL TERMINAL, BATTERY TERMINAL, LOAD TERMINAL, and RJ45 COMMUNICATION PORT. Mounting holes (Φ5) are also indicated.

This image displays the bottom of the controller, labeling the RTS* Interface, PV Terminals, Battery Terminals, Load Terminals, and RS485 communication interface.
4. Setup and Installation
4.1 Wiring Diagram
Follow the wiring diagram carefully to ensure correct and safe installation of your solar charge controller. Always connect the battery first, then the solar panel, and finally the load.

This diagram illustrates the connections: Solar Panels (Max Voc: 100V, Max Power: 390W (12V) / 780W (24V)) connect to the controller's PV terminals. The controller connects to the Battery (12Vdc or 24Vdc) via Battery terminals. DC Loads (Max 30A) connect to the Load terminals. An Inverter (110Vdc or 220Vdc) for AC Loads (110Vdc or 220Vdc) can be connected to the battery.

This diagram shows the controller connected to a solar panel and battery, with outputs to various loads including an MT (Meter), SPP (Solar Power Plant), PC (Computer), and a light bulb, demonstrating load control capabilities.
4.2 Battery Type Configuration
The controller is compatible with various battery types. Ensure you select the correct battery type for optimal charging and battery longevity.

This image lists compatible battery types: Flooded (FLD), Gel, AGM/Sealed (SLD), User custom Battery, and Lithium-ion (LI). It also notes that for Lithium Battery programming, accessories like Ebox-Wifi or Ebox-Blue are needed for PC or phone APP connection.
Note: Lead-acid battery "User" settings must be set via MT50 or PC software or phone APP. If you are connecting lithium-ion batteries, you must download the PC software or the latest version of the phone APP (only supports Android phones).
4.3 Smart Device Connection (Optional)
The controller supports monitoring and parameter setting via a mobile phone APP or PC software. This requires an optional Ebox-Wifi or Ebox-Blue adapter.
Video 4.1: Connecting the EPEVER Tracer Controller to a Smartphone App via WiFi Module.
This video demonstrates the process of connecting the EPEVER Tracer MPPT Solar Charge Controller to a smartphone application using an external WiFi module. It shows the app searching for devices, connecting to the WiFi module, and then displaying real-time data from the controller, including PV voltage, current, power, battery voltage, current, temperature, and load status.
5. Operating the Controller
5.1 LCD Display Information
The LCD provides comprehensive real-time data about your solar system's performance.

This image shows various screens of the LCD display, including PV INPUT (voltage), Charging Current, Power Generation, Load Work Mode, Battery Voltage, Battery Current, Discharge Capacity, Discharge Current, and Temperature.
Use the "SELECT" and "ENTER" buttons to navigate through the display screens and adjust settings as needed.
5.2 Load Work Modes
The controller offers multiple load work modes to suit different application needs. These modes typically include:
- Manual Control: Turn the load on/off manually.
- Light Control: Load turns on at dusk and off at dawn.
- Light Control + Timer: Load turns on at dusk and stays on for a set number of hours.
- Dual-Timer Control: Two separate timer periods for load operation.
- Test Mode: For testing purposes.
- Always ON/OFF: Load is always on or always off.
Refer to the detailed manual (if available) or the controller's interface for specific instructions on configuring load work modes.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your solar charge controller.
- Cleanliness: Keep the controller clean and free from dust and debris. Ensure ventilation openings are not blocked.
- Connections: Periodically check all wiring connections for tightness and corrosion. Loose connections can cause overheating and damage.
- Environment: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
- Battery Health: Monitor battery voltage and health. Ensure the battery type setting in the controller matches your battery.
- Firmware Updates: Check the EPEVER website for any available firmware updates for your model to ensure you have the latest features and bug fixes.
7. Troubleshooting
If you encounter issues with your EPEVER Tracer MPPT Solar Charge Controller, refer to the following common troubleshooting steps:
- No Display/Power:
- Check battery connections. Ensure they are secure and correctly polarized.
- Verify battery voltage is within the controller's operating range (8-32V).
- No Charging:
- Check solar panel connections. Ensure they are secure and correctly polarized.
- Verify PV input voltage is within the controller's maximum PV open circuit voltage (60V or 100V depending on model).
- Ensure there is sufficient sunlight on the solar panels.
- Check for any shading on the solar panels.
- Load Not Working:
- Check load connections.
- Verify load current does not exceed the controller's rated discharge current.
- Check the selected load work mode. Ensure it is set to an appropriate mode (e.g., Manual ON, Light Control).
- Ensure the battery has sufficient charge.
- Incorrect Readings:
- Ensure the battery type is correctly configured in the controller settings.
- Check the temperature sensor connection if external.
For more complex issues, consult the full product manual or contact EPEVER technical support.
8. Specifications
Detailed technical specifications for the Tracer AN series MPPT Solar Charge Controllers.

This table provides comprehensive specifications for Tracer1206AN, Tracer1210AN, Tracer2206AN, Tracer2210AN, Tracer3210AN, and Tracer4210AN models, including System nominal voltage, Rated charge current, Rated discharge current, Battery voltage range, Battery type, Max. PV open circuit voltage, Max. PV input power, Self-consumption, Discharge circuit voltage drop, Temperature compensate, Grounding, RS485 interface, LCD backlight time, Weight, Working environment temperature, Storage temperature range, Relative humidity, Dimension, Mounting dimension, Mounting hole size, Terminal, and Recommended cable.
| Parameter | Tracer2206AN | Tracer4210AN |
|---|---|---|
| System nominal voltage | 12/24VDC Auto | |
| Rated charge current | 20A | 40A |
| Rated discharge current | 20A | 40A |
| Battery voltage range | 8~32V | |
| Battery Type | Lead-acid(Sealed,Flooded,Gel) and Lithium-ion batteries | |
| Max. PV open circuit voltage | 60VDC | 100VDC |
| Max. PV input power | 260W/12V, 520W/24V | 520W/12V, 1040W/24V |
| Self-consumption | ≤12mA | |
| Discharge circuit voltage drop | ≤0.23V | |
| Temperature compensate | - 3mV/℃/2V (Default) | |
| Grounding | Common negative | |
| RS485 interface | 5VDC/100mA | |
| LCD backlight time | 60S (Default) | |
| Weight | 1.14kg | 1.87kg |
| Working environment temperature | -25℃~+50℃ | |
| Storage temperature range | -20℃~+70℃ | |
| Relative humidity | ≤95%, N.C. | |
| Dimension | 220x154x52mm | 252x180x63mm |
| Mounting dimension | 170x145mm | 210x171mm |
| Mounting hole size | Φ5mm | |
| Terminal | 6AWG(16mm2) | 6AWG(16mm2) |
| Recommended cable | 10AWG(6mm2) | 8AWG(10mm2) |
9. User Tips
- Optional WiFi Dongle: Consider purchasing the optional WiFi dongle for convenient monitoring and control via a smartphone app. This allows for easy access to system data and settings.
- Lithium Battery Programming: If using Lithium-ion batteries, remember that programming requires additional accessories like an Ebox-Wifi or Ebox-Blue for PC or phone APP connection. Ensure you have the latest version of the phone APP (Android only) or PC software.
- Installation: Ensure proper installation, especially regarding wiring and battery type selection, for optimal performance and safety.
- Language: The app interface might default to other languages (e.g., Chinese) initially. Look for language settings within the app to switch to English.
10. Warranty and Support
EPEVER products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official EPEVER website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.