LIGE Q9 Pro Smart Watch User Manual

1. Introduction

Welcome to the LIGE Q9 Pro Smart Watch user manual. This guide provides detailed instructions on how to set up, operate, and maintain your new smartwatch. The LIGE Q9 Pro is a versatile device designed to enhance your daily life with features like health monitoring, fitness tracking, and smart notifications.

For additional information and a downloadable PDF version of this manual, please refer to the official documentation available at this link.

2. Package Contents

Please check the package for the following items:

• Smart Watch Host (x1)
• Charging Base (x1)
• Wrist Strap (x1)
• User Manual (x1)
• Retail Box (x1)

3. Product Overview

The LIGE Q9 Pro Smart Watch features a sleek design with an aluminum alloy body and a full-screen touch display. Familiarize yourself with the main components:

3.1. Appearance

• Aluminum Alloy Body: Durable and lightweight casing.
• Power On/Off Button: Located on the side for control.
• Touch Screen: Full-screen interactive display.
• Heart Rate Sensor: Located on the back for health monitoring.
• Charging Contacts: On the back for connecting to the charging base.

4. Setup

4.1. Initial Charging

Upon receiving your LIGE Q9 Pro Smart Watch, please charge it fully before first use. The battery may be low due to long-term logistics. Connect the charging base to a 5V 500mA power supply. Avoid using over-voltage power supplies. Do not charge the device if there are water stains on it.

4.2. App Download and Installation

To unlock the full potential of your smartwatch, download and install the companion app, "GloryFit".

1. Scan the QR code provided in the physical user manual or search for "GloryFit" in your device's application market (App Store for iOS, Google Play Store for Android).
2. Install the app on your smartphone.
3. System Requirements:
   • Android 4.4 and above
   • iOS 8.0 and above (iPhone 5S and above)
4. After downloading, register as a new user or log in using a third-party account. Complete your basic personal information.
5. Start the binding process within the app to connect your smartwatch.
6. Once binding is complete, configure the watch functions in the app according to your preferences.

4.3. Strap Installation

The watch strap can be easily installed or replaced. Refer to the diagram below for guidance:

Step 1: Align the pin on the strap with the lug hole on the watch body.

Step 2: Push the pin inwards and slide the strap into place until the pin clicks securely into the opposite lug hole.

5. Basic Operations

• Power On/Off: Long press the side button for 4 seconds.
• Return to Main Interface: Short press the side button.
• Change Dial: On the main interface, press and hold for 3 seconds to switch between available watch faces.
• Quick Settings/Shortcuts: On the main interface, swipe down to view Bluetooth status, battery volume, and a shortcut menu.
• View Messages: On the main interface, swipe up to see incoming messages. Tap to read the content.
• Function List: On the main interface, swipe right to display the full list of functions.
• Common Functions: On the main interface, swipe left to access frequently used functions.

6. Functions

The LIGE Q9 Pro Smart Watch offers a wide range of features to support your health and daily activities:

6.1. Health Monitoring

• Heart Rate Monitoring: Switch to the heart rate monitoring interface to automatically measure your current heart rate. Swipe to exit the measurement. Real-time heart rate measurement can be activated or inactivated in the app.
• Blood Oxygen Saturation (SpO2) Monitoring: Tap on the blood oxygen saturation monitoring function to start measurement. The watch will vibrate to indicate completion.
• Blood Pressure Monitoring: Measure current high and low blood pressure in real-time. Data can be synchronized to the app.
• Body Temperature Monitoring: Switch to the body temperature interface to measure surface and actual body temperature. The watch uses a highly sensitive thermistor to perceive subtle temperature changes. Monitoring time and temperature warnings can be set in the app.
• Sleep Monitoring: Switch to the sleep monitoring interface to check your sleep from the previous night. When worn during sleep, the watch automatically records deep sleep, light sleep, and total sleeping hours.

6.2. Activity Tracking

• Exercise Status: Records current walking steps, distance, and calories in real-time.
• Multiple Sports Modes (24 types): Tap to enter the sport list, then tap on a selected sport mode to start measurement. Swipe right to pause, stop, or continue. Includes modes for outdoor running, cycling, swimming, rope skipping, badminton, table tennis, tennis, mountaineering, walking, basketball, football, baseball, cricket, volleyball, hockey, rugby, dancing, yoga, spinning, sit-ups, indoor running, gymnastics, boating, and jumping jack.

6.3. Smart Features

• Message Reminders: The watch saves the latest 8 messages. Tap to read or click to delete. Supports notifications from QQ, WeChat, Facebook, Line, WhatsApp, and more.
• Incoming Call Reminder: Notifies you of incoming calls.
• Alarm Reminder: Set alarms through the app.
• Sedentary Reminder: Reminds you to move after periods of inactivity.
• Goal Reaching Reminder: Notifies you when you achieve your set fitness goals.
• Weather: When connected to the app, displays current day and next week's weather conditions.
• Flashlight: Tap to activate flashlight mode; swipe right to exit.
• Clock Display: Various versatile dials and DIY wallpaper options.
• Music Control: Play music on your phone and control it from the watch (pause/play, previous, next).
• Do Not Disturb (DND) Mode: Set DND periods in the app; activate or deactivate from the watch.
• Find Phone: Tap "Find Phone" on the watch, and your phone will ring as a reminder (even if the screen is off).
• Remote Photography: Control your phone's camera remotely.
• Stopwatch: Access stopwatch function, start, pause, continue, or reset.
• Countdown: Select a preset time or swipe up to set a custom countdown time.
• Brightness Adjustment: Tap "+" and "-" to adjust brightness (four levels available).
• Settings: Access options for dial selection, "About" information, shutdown, and reset.

7. Specifications

8. Maintenance & Care

• Environmental Conditions: Avoid strong impact, extreme heat, and prolonged sun exposure. Do not use or store the device in places with high temperature and high humidity.
• Disassembly: Do not disassemble, repair, or modify the device without authorization.
• Charging Safety:
  • Charge with a 5V 500mA power supply.
  • Over-voltage power supply is strictly forbidden for charging.
  • Charging is prohibited if there are water stains on the device.
• Water Resistance: The watch is IP68 rated, meaning it is splash-proof and sweat-proof, suitable for sports and daily activities. However, it is not suitable for swimming, hot water, hot baths, or exposure to water vapor.

9. Troubleshooting

9.1. Common Issues and Solutions

Q: Why is the blood pressure value deviated from a sphygmomanometer?

A: The watch measures blood pressure from the arteriole branches, while a sphygmomanometer measures from the radial artery. These different measurement sites, along with factors like temporary blood flow restriction during sphygmomanometer use, can cause a deviation of 30-40 units. The watch's measurements are for reference only and not for medical diagnosis.

Q: Why can't the watch receive message pushes?

A:

For Android phones:

1. Confirm that the message push switch is enabled in the GloryFit app.
2. Ensure messages are displayed normally in your phone's notification bar, as the watch reads notifications from there. (Check phone settings to enable notifications for WeChat, QQ, phone calls, SMS, etc.)
3. Open the auxiliary function settings for the GloryFit app in your phone's settings.

For Apple phones:

1. Confirm that the message push switch is enabled in the GloryFit app.
2. Ensure messages are displayed normally in your phone's notification bar. (Go to phone settings, then notification settings, and enable notifications for WeChat, QQ, phone calls, SMS, etc.)

Q: Why does the pedometer not count steps when I have already started walking?

A: To reduce errors, the smartwatch typically sets an initial threshold of 10 steps. It will start counting and displaying steps once you have walked more than 10 steps. The app will then show the real walking steps, starting from step 10.

Q: Why can't the device boot or start up properly?

A: Please charge your new device for at least 10 minutes or more before the first usage. This ensures normal device boot and optimal operation. If the battery is removable (not applicable to this model), ensure it is properly installed before charging.

Q: Cannot find device when pairing?

A: Please ensure the distance between your phone and the device is less than 0.5m. Also, ensure the device is not under low battery. If the problem persists after 1.5 hours of charging, please contact support.

Q: Cannot connect device to application?

A: Some smartphone Bluetooth services can become abnormal after a reboot. Please reboot your smartphone and try pairing the device again.

Q: Why does the Android mobile disconnect?

A: Android mobile phone system memory management may force background apps to close. You need to turn off power-saving mode or add the GloryFit app to the system's "green background" or "whitelist" to prevent it from being forced closed. The app must be running in the background for Bluetooth to remain connected automatically.

Q: Why couldn’t I connect the Bluetooth?

A:

1. Download the GloryFit app first.
2. Search for the watch's Bluetooth name within the app and connect it.
3. You should see a request to connect on your phone; click "pair."
4. If you have connected the Bluetooth before, please clear all previously paired Bluetooth devices from your phone's settings and try again.

10. User Tips

• Always charge your watch fully upon receiving it to ensure proper initial startup.
• Scan the QR code in the manual to download the official "GloryFit" app for the best experience.
• If you experience Bluetooth connectivity issues, try rebooting your smartphone.
• For Android users, ensure the "GloryFit" app is excluded from power-saving optimizations to maintain a stable background connection.
• The strap is interchangeable; consider different colors or materials to match your style.

11. Important Notes & Safety

• Medical Disclaimer: This product is an electronic consumer monitoring device and is not intended for medical purposes. All measurement data is for reference only and should not be compared to medical devices.
• Manual Updates: The company reserves the right to modify the user manual content without prior notification.
• Software Variations: It is normal for some functions to differ slightly in specific software versions.

12. Warranty & Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.