1. Product Overview
The IMILAB C22 is a versatile home security camera designed for indoor use, offering 3K resolution, Wi-Fi 6 compatibility, and advanced AI detection features. It can be placed on flat surfaces or mounted on a wall or ceiling.
1.1. Camera Components

Figure 1: IMILAB C22 Front View with Status Indicator, Lens, MIC, and Reset Hole.

Figure 2: IMILAB C22 Rear View with Loudspeaker and Micro-USB Charging Port.
- Status Indicator: Displays the current status of the camera.
- Lens: Captures video footage.
- MIC: Microphone for two-way audio.
- Reset Hole: Used to restore factory settings.
- MicroSD Slot: For local storage, revealed by pushing the lens upward.
- Loudspeaker: For two-way audio output.
- Micro-USB Charging Port: For power input.
1.2. Package Contents

Figure 3: Contents of the IMILAB C22 package, including camera, power adapter, manual, screw pack, and mounting base.
- IMILAB C22 Camera x 1
- Power Cable x 1
- Wall Mounting Accessories Pack x 1
- User Manual x 1
2. Setup
2.1. Installation
The IMILAB C22 camera can be placed on flat surfaces such as desks, dining tables, and coffee tables. It can also be securely mounted on a wall or ceiling.
Wall Mounting Instructions:
- Use a pencil to mark the positions for the base mounting holes on the wall. Drill two holes at these marked positions. Each hole should be approximately 6 mm in diameter and 30 mm deep.
- Insert the provided plastic wall plugs into the drilled holes.
- Position the base with the arrows facing forward, aligning the holes. Insert the screws and tighten them into the wall plugs using a Phillips head screwdriver.
- Align the grooves on the bottom of the camera with the raised part on the base. Turn the camera clockwise until it locks securely into place.

Figure 4: Wall Mounting Diagram showing drilling and attachment steps.
⚠ Precaution for Mounting: The wall must be able to support at least three times the total weight of the camera.
⚠ WARNING: To prevent possible injury, the camera must be securely fixed to the ceiling or wall according to these installation instructions.
2.2. Installing a MicroSD Card
- Ensure the camera is unplugged from its power source.
- Adjust the camera lens upward until the MicroSD slot is revealed.
- Insert the MicroSD card into the slot with the contact points facing down.

Figure 5: MicroSD Card Slot Location and insertion direction.
Note: Always unplug the camera when installing or removing the MicroSD card. Use a MicroSD card from a qualified brand. The camera supports MicroSD cards with a maximum capacity of 64 GB and only the FAT32 format. MicroSD cards with a capacity of 64 GB or more may need to be formatted to FAT32 via "Settings > Manage Storage" on the camera's plug-in page in the Mi Home/Xiaomi Home app. A read/write speed of no less than U1/Class 10 is recommended.
2.3. Turning the Device On
The IMILAB C22 will automatically activate once the power cable is inserted into the Micro-USB charging port.

Figure 6: Powering on the IMILAB C22 and app connection steps.
- If the indicator light is flashing orange, the device has been successfully activated. If not, please reset the device.
- Once the IMILAB C22 is turned on, do not attempt to rotate its head by force. If the camera position is incorrect, adjustments can be made through the app.
Indicator Light Status:
- Steady blue: Connected / Device status is normal.
- Flashing blue: Network error.
- Flashing orange rapidly: Waiting for connection.
- Flashing orange slowly: System upgrade in progress.
2.4. Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app (referred to as Xiaomi Home app in Europe, except for Russia). Control your device using this app.
- Scan the QR code below to download and install the app. If the app is already installed, you will be directed to the connection setup page. Alternatively, search for "Mi Home/Xiaomi Home" in your app store.
- Open the Mi Home/Xiaomi Home app, tap "+" on the upper right corner.
- Follow the in-app instructions to add your IMILAB C22 device.

Figure 7: QR Code for Mi Home/Xiaomi Home App download.
Note: The app version may be updated; please follow the instructions based on the current app version. Ensure the camera is powered on and the network connection is stable during the connection process. The indicator will rapidly flash orange when waiting for a connection and turn blue once successfully connected.
2.5. Restoring Factory Settings
If you need to change the network the camera is connected to, or the Xiaomi Account it is paired with in the Mi Home/Xiaomi Home app, press and hold the reset button for approximately three seconds until the indicator rapidly flashes orange. This will restore the camera to factory settings. Afterward, reconnect the camera with the app.
Note: Restoring factory settings will not delete the content stored on the MicroSD card.
3. Operating the Camera
3.1. Real-time Surveillance
Within the camera's plug-in section of the Mi Home/Xiaomi Home app, you can access the real-time monitoring screen. From here, you can adjust image sharpness, change the horizontal and vertical viewing angles, capture screenshots, record video, and make remote calls.
3.2. Infrared Night Vision
The camera automatically switches to night vision mode at night, adapting to changes in ambient light. With built-in infrared night vision lights, the camera can capture clear images and videos even in dark environments.

Figure 8: Enhanced Night Vision maintains full-color footage in low-light compared to standard night vision.
3.3. Playback
The playback feature is available only when a compatible MicroSD card is installed in the IMILAB C22 or when a cloud storage service has been purchased.
3.4. Automatic Surveillance
When the home surveillance assistant is enabled, the camera will record videos upon detecting human movement or real-time changes within its monitored area, sending notifications to your app. You can enable or disable this function in the camera's plug-in in the Mi Home/Xiaomi Home app. Surveillance can be set for all-day, daytime, nighttime, or custom periods. Alert sensitivity and time intervals are also customizable within the app.

Figure 9: Automatic surveillance with motion detection and app notifications.
3.5. Video Sharing
In the camera's plug-in section of the Mi Home/Xiaomi Home app, you can select the device sharing option in the settings menu to share your camera's feed with other users. Individuals with whom the camera is shared will need to download the Mi Home/Xiaomi Home app and sign in with a Xiaomi account.
4. Maintenance
- Keep the camera clean by gently wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Ensure the camera is not exposed to high humidity or water to prevent damage to its precision electronic components.
- Regularly check for firmware updates through the Mi Home/Xiaomi Home app to ensure optimal performance and security.
- Periodically verify that the MicroSD card is functioning correctly and has sufficient space if you are using local storage.
5. Troubleshooting
- Camera not turning on: Ensure the power cable is securely inserted into the Micro-USB charging port and the power adapter is connected to a working outlet.
- Indicator light flashing blue: This indicates a network error. Check your Wi-Fi connection and ensure the camera is within range of a strong signal.
- Indicator light rapidly flashing orange: The camera is waiting for a connection. Follow the app connection steps (Section 2.4). If it persists, try resetting the device (Section 2.5).
- Poor image quality (overly bright, dark, or white images): Avoid placing the camera's lens directly facing or next to reflective surfaces like glass windows or white walls.
- Weak Wi-Fi signal or disconnections: Ensure the camera is installed in an area with a strong Wi-Fi signal. Avoid placing it near objects that can interfere with Wi-Fi signals, such as metal objects or microwave ovens.
- MicroSD card not recognized or recording: Ensure the card is from a qualified brand, formatted to FAT32, and has a read/write speed of U1/Class 10 or higher. Unplug and re-insert the card.
- Camera not responding to app commands: Try restarting the camera by unplugging and re-plugging it. If the issue persists, perform a factory reset (Section 2.5) and re-pair with the app.
6. User Tips
- Mi Home App Compatibility: The camera is fully compatible with the Mi Home/Xiaomi Home app for seamless control and monitoring.
- Recording History: Yes, the camera supports recording history. You can store footage locally on a MicroSD card (up to 64GB, FAT32 format) or utilize cloud storage services for extended history.
- Two-Way Communication: The camera features two-way audio, allowing you to speak and listen through the device using the Mi Home app.
- Wi-Fi Compatibility: The IMILAB C22 operates on Wi-Fi IEEE 802.11 b/g/n/ax 2.4 GHz networks. It is not compatible with 5GHz Wi-Fi.
- Versatile Mounting: The camera can be easily attached to ceilings or walls using the provided mounting accessories, offering flexible placement options.
- Night Vision: The enhanced night vision provides clear, full-color footage in low-light conditions. While infrared lights are used, they are designed to be discreet.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | IMILAB C22 |
| Model Number | CMSXJ60A |
| Resolution | 2880 x 1620 (3K) |
| Megapixels | 5 MP |
| Input Power | 5V=2A |
| Power Consumption | 10W |
| Dimensions (L x W x D) | 108 mm x 76 mm x 76 mm (4.37 x 2.95 x 2.87 inches) |
| Net Weight | 239 g |
| Operating Temperature | -10 °C to 40 °C |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n/ax 2.4 GHz |
| Operating Frequency Range | 2400-2483.5 MHz |
| Max Output Power | 18 dbm |
| Expandable Memory | MicroSD card (up to 64 GB, FAT32 format) |
| Lens (mm) | 2mm |
| Zoom Type | Digital zoom (up to 6X) |
| Movement Range (Pan) | 0°-360° |
| Movement Range (Tilt) | -10°-180° |
| Viewing Angle | 360° |
| AI Functions | Human Detection, Noise Detection |
| Color Night Vision | Yes |
| IR Distance | 10m |
| Audio Output | Two Way Audio |
| Video Compression Format | H.265 |
| Alarm Action | FTP Photo, Telefon Alarm, Local Alarm |
| Supported Mobile Systems | Android, iOS |
| Supported Operating Systems | macOS, Windows 10 |
| App Name | Mi Home / Xiaomi Home |
| Shell Material | Plastic |
| Installation | Normal, Wall Mounted, Pendant Mount |
| Certification | CE, RoHS, KC, WEEE |

Figure 10: Detailed dimensions and specifications of the IMILAB C22.
8. Warranty and Support
8.1. Warranty Information
The IMILAB C22 comes with a standard 2-year warranty. An additional 1-year warranty extension (total 3 years) may be applicable upon registration of the order and product on the official IMILAB website.
8.2. Manufacturer and Support
- Manufacturer: Shanghai Imilab Technology Co., Ltd.
- Address: Room 001A, Floor 11, Block 1, No. 588 Zixing Road, Minhang District, Shanghai, China
- Official Website: www.imilabglobal.com
- Support Email: help@imilab.com
- Support Website: www.imilabhelp.com
8.3. WEEE Information
All products bearing the WEEE symbol (Waste Electrical and Electronic Equipment, as per Directive 2012/19/EU) should not be mixed with unsorted household waste. Protect human health and the environment by handing over waste equipment to a designated collection point for recycling. Proper disposal and recycling prevent potential negative consequences. Contact your installer or local authorities for more information.
8.4. EU Declaration of Conformity
Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type IMILAB C22 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.imilabglobal.com/pages/eu-declaration-of-conformity

CE Mark indicating compliance with European standards.
9. Disclaimer
⚠ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.