BASEUS Bowie 30

Contents

Baseus Bowie 30 True Wireless Earbuds User Manual

Model: Bowie 30 | Brand: BASEUS

1. Introduction

Thank you for choosing the Baseus Bowie 30 True Wireless Earbuds. These earbuds are designed to provide a superior audio experience with advanced features such as 50dB deep active noise cancellation, crystal-clear calls with 6-mic Environmental Noise Cancellation (ENC), and an impressive 65 hours of total playback time with the charging case. They are also IPX4 water-resistant, making them suitable for various activities. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

Baseus Bowie 30 Earbuds and Charging Case
Baseus Bowie 30 Earbuds and Charging Case with 50dB ANC, IPX4, and 65H Playtime.

2. Package Contents

Please check the package for the following items:

  • Baseus Bowie 30 True Wireless Earbuds (L/R)
  • Charging Case
  • USB-C Charging Cable
  • Replaceable Ear Pads Set
  • User Manual

3. Product Overview

The Baseus Bowie 30 earbuds feature a sleek design with intuitive touch controls and a charging case equipped with a digital display for battery status. Two versions of the charging case are shipped randomly, with identical earbud features.

Baseus Bowie 30 Earbuds and Charging Case
Baseus Bowie 30 Earbuds and Charging Case.
Comparison of two versions of Baseus Bowie 30 charging cases
Two versions of the Baseus Bowie 30 charging case are shipped randomly. The earbuds' features remain the same.
Digital display on charging case showing battery level
Digital display on the charging case shows the battery level at a glance.

4. Setup Guide

4.1. Initial Charging

Before first use, ensure your earbuds and charging case are fully charged.

  1. Take out the earphones and tear off the insulating film on the earphones, then put them back into the earphone case.
  2. Use a Type-C charging cable to charge the earphone case. The estimated full charging time is about 1-2 hours.
  3. The percentage on the digital display will flash to show the current power level and charging status. When fully charged, the percentage will show 100% steadily.

4.2. Bluetooth Connection

  1. Power On: Open the charging case to turn it on. The left and right earphones will flash slowly and breathe alternately, indicating they are in pairing mode.
  2. Device Connection: Turn on the Bluetooth function of your device (e.g., smartphone, tablet) and search for "Baseus Bowie 30" in the list of available devices.
  3. Select "Baseus Bowie 30" to pair. After successful pairing, the left and right earphones will flash alternately once, and then the white light will stay on.

Note: When you take out the earphones while connected, the white light will go out when playing music, and the white light will stay on after pausing the music for a few seconds.

Bowie 30 TWS Wireless Earphones Operating Guide for Charging and Connection
Detailed operating guide for charging and Bluetooth connection.

5. Operating Instructions

5.1. Touch Controls

The Baseus Bowie 30 earbuds feature simple touch controls for various functions:

FunctionGesture
Volume +Swipe up on L or R earbud
Volume -Swipe down on L or R earbud
Play / PauseDouble-tap L or R earbud
Activate Voice AssistantTriple-tap L or R earbud
Noise Cancellation Mode ToggleLong-press L or R earbud for 1.5 seconds
Answer / Hang Up CallDouble-tap L or R earbud
Decline CallLong-press L or R earbud for 1.5 seconds
Simple Touch Controls Diagram
Visual guide to simple touch controls on the earbuds.

5.2. Active Noise Cancellation (ANC)

The earbuds feature 50dB deep active noise cancellation to reduce environmental sounds. Use the touch control gesture (long-press) to toggle between ANC modes.

Man on subway using earbuds, illustrating -50dB ANC for blocking subway & traffic noises
Experience quiet with -50dB ANC, effectively blocking subway and traffic noises.

5.3. Crystal-Clear Calls

Equipped with 6-mic ENC technology, the earbuds reduce 98% of background noise, ensuring your voice is clear during calls.

Man on video call using earbuds, illustrating Crystal-Clear Calls with 6-Mic ENC
Enjoy clear communication with 6-Mic ENC for crystal-clear calls.

5.4. Enhanced Bass

The 10mm ultra-large audio drivers deliver powerful and deep bass, enhancing your listening experience.

Bass frequency response graph showing 200% more bass presence with Baseus Effects
A frequency response graph illustrating the 200% increase in bass presence with Baseus Effects.

6. In-App Customization

Unlock the full potential of your Baseus Bowie 30 earbuds by downloading the official Baseus app. The app allows you to:

  • Customize button controls
  • Adjust EQ settings
  • Check remaining battery life
  • Access additional features like low latency mode
Baseus app interface for customizing controls, EQ, and checking battery
Screenshots of the Baseus app interface showing customization options.

7. Maintenance

7.1. Cleaning

  • Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth.
  • Do not use harsh chemicals or abrasive materials.

7.2. Storage

  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid storing in extreme temperatures or high humidity.

7.3. Battery Care

  • To prolong battery life, avoid fully discharging the earbuds and charging case frequently.
  • Charge the device regularly, even if not used for extended periods.

8. Troubleshooting

If you encounter any issues with your Baseus Bowie 30 earbuds, please refer to the following common solutions:

ProblemSolution
Earbuds not chargingEnsure the charging contacts on both the earbuds and the case are clean and free of debris. Verify the charging cable and power source are working correctly.
Unable to pair with deviceMake sure Bluetooth is enabled on your device and the earbuds are in pairing mode. Try resetting the earbuds (see below).
Sound quality issues or no soundCheck the volume levels on both your device and the earbuds. Ensure the earbuds are properly seated in your ears. Try disconnecting and reconnecting Bluetooth.
Indicator light behaviorThe indicator lights on the earbuds are typically on during pairing and charging. During music playback, they usually turn off. You may be able to adjust light settings via the Baseus app.

8.1. Reset Function

If you experience persistent issues, you can reset your earbuds:

  1. Put both earphones into the charging case and open the cover.
  2. Press and hold the charging case button for 5 seconds.
  3. The earphone indicator light and the charging case digital display will flash 3 times, indicating a successful reset.

9. Specifications

FeatureDetail
Product NameBaseus True Wireless Earphones
Model No.Baseus Bowie 30
ColorCosmic Black
MaterialABS, Plastic
Weight58g
Bluetooth VersionV5.3
Wireless RangeAbout 10 m (<10m)
CommunicationTrue wireless
Noise Cancellation50dB Deep Active Noise Cancellation (ANC)
Microphones6-Mic ENC (Environmental Noise Cancellation)
Drivers10mm Ultra-Large Audio Driver
Frequency Response Range20 - 20000Hz
Earphone Battery Capacity45mAh/0.173Wh
Charging Case Battery Capacity800mAh/2.96Wh
Music Playback Time (Earbuds only)About 8 hours (at 70% volume)
Total Playback Time (with Charging Case)Up to 65 hours
Charging TimeAbout 1.5 hours
Earphone Rated Input3.8V-5V == 100mA
Charging Case Rated Input5V == 600mA
Charging PortUSB-C
Waterproof RatingIPX4 (Resistance against sweat, rain, & dust)
CodecsAAC, SBC
CertificationsCE, FCC, RoHS, KC, BQB
OriginMainland China
Product CodeA00073100126-00
Barcode6932172659394
Product Specifications Table
Detailed product specifications including dimensions and technical data.
Compatibility and detailed features list
Overview of compatibility and key features.

10. User Tips

  • Mono Mode: The Baseus Bowie 30 earbuds support using a single earbud independently. If you take one out, the other will continue to function.
  • Wind Noise Reduction: These earbuds are designed with wind noise reduction, making them suitable for outdoor activities like jogging or commuting in windy conditions.
  • Software Updates: Baseus guarantees software updates for the Bowie 30 until December 30, 2025. Ensure your app and earbuds firmware are up-to-date for optimal performance.
  • Indicator Lights: The indicator lights on the earbuds are primarily for pairing and charging status. They typically turn off during active music playback to avoid distraction.

11. Safety Information

  • Do not disassemble or modify the product.
  • Keep the product away from extreme temperatures, direct sunlight, and open flames.
  • Avoid exposing the product to water or other liquids beyond its IPX4 rating.
  • Do not use the product during activities that require full attention, such as driving or operating heavy machinery.
  • Dispose of the product and its battery responsibly according to local regulations.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please contact Baseus customer support through their official website or the retailer where you purchased the product. Please retain your proof of purchase for warranty claims.

Baseus is committed to providing software updates for the Bowie 30 until December 30, 2025, ensuring continued performance and feature enhancements.

International Certifications for Baseus Bowie 30
The Baseus Bowie 30 earbuds hold various international certifications including CE, FCC, RoHS, KC, and BQB.

13. Video Guide

Watch this official video for a visual guide on the features and usage of your Baseus Bowie 30 earbuds.

Official product video showcasing the Baseus Bowie 30 True Wireless Earbuds.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.