1. Product Overview
The XSDTS Smart Door Lock Handle (Model FT001) is an advanced security solution designed for modern homes and offices. It offers multiple convenient and secure ways to unlock your door, integrating seamlessly with smart home ecosystems like Tuya. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and security.
Key Features:
- Multiple Unlocking Methods: Fingerprint, Password, Mobile App (Tuya Smart), IC Card, and Mechanical Key.
- High Recognition Rate: Fingerprint recognition up to 99.8% accuracy, unlocking in approximately 0.3 seconds.
- Easy Installation: Designed for standard doors, no complex wiring or drilling required.
- Adjustable Handle Direction: Compatible with both left-handed and right-handed doors.
- Emergency Power: USB Type-C interface for emergency charging and mechanical key backup.
- Security Features: Virtual password for enhanced security, security alarm for tampering.
- Smart Home Integration: Tuya Bluetooth connectivity (optional WiFi Gateway for remote access).
2. Package Contents
Please verify that all components are present before beginning installation:
- Front Handle Assembly (with fingerprint sensor and keypad)
- Rear Handle Assembly
- Mortise/Latch
- Strike Plate
- Screws and Mounting Hardware
- Mechanical Keys (2 included)
- IC Cards (quantity may vary, typically 2-3)
- User Manual (English language instructions)
- 4x AAA Batteries (may be included)
3. Installation Guide
The XSDTS Smart Door Lock is designed for easy installation on standard doors without the need for complex wiring or drilling. Please follow these steps carefully.
3.1 Door Compatibility and Preparation
- Door Thickness: Suitable for doors with a thickness of 35-70mm.
- Door Type: Compatible with wooden, stainless steel, bronze, double, and old-fashioned security doors.
- Handle Direction: The handle direction is reversible and compatible with both left-open and right-open doors.
3.2 Installation Steps
- Install the Latch: Insert the latch into the door edge and secure it with screws. Ensure the latch is oriented correctly for your door's opening direction. The latch backset is adjustable to 60mm or 70mm.
- Pass Connecting Wire: Pass the connecting wire from the front handle through the latch mechanism and the door hole to the inside.
- Install Front Handle: Position the front handle assembly on the exterior side of the door, aligning it with the latch.
- Install Rear Handle and Connect Wire: On the interior side, connect the wire from the front handle to the rear handle assembly. Carefully tuck the wire into the designated channel.
- Secure Handles: Tighten the outer screw to secure both handle assemblies to the door.
- Install Batteries: Open the battery compartment on the rear handle. Insert 4 AAA batteries, ensuring correct polarity.
- Close Battery Box: Cover the battery box securely.
4. Operating Instructions
4.1 Unlocking Methods
The XSDTS Smart Door Lock offers five ways to unlock:
- Fingerprint Unlock: Place your registered finger on the sensor. The lock will verify your fingerprint in approximately 0.3 seconds.
- Password Unlock: Enter your registered password on the keypad.
- IC Card Unlock: Swipe your registered IC card over the card reader area.
- Mobile App Unlock: Use the Tuya Smart app on your smartphone to unlock the door via Bluetooth.
- Mechanical Key Unlock: In case of emergency or power failure, use the provided mechanical key to unlock the door.
4.2 Advanced Features
- Virtual Password: To enhance security, you can enter any random numbers before and after your correct password. Only the continuous correct password in the middle will unlock the door.
- Pass Mode: Enable pass mode to unlock the door without requiring a password, fingerprint, or card. This is useful for temporary access or high-traffic periods.
- Temporary Password (App): Generate one-time temporary passwords remotely via the Tuya Smart app and share them with guests or service providers.
- Smart LED Indicator: The LED indicator shows the lock status (enabled, verify successfully, verify failed).
- Security Alarm: The lock features a security alarm that triggers if the password is entered incorrectly multiple times or if the lock is tampered with.
4.3 Tuya Smart App Integration
The lock connects to the Tuya Smart app via Bluetooth. For remote control and advanced features (like remote temporary password generation), a Tuya WiFi Gateway is required (sold separately).
5. Maintenance
- Battery Replacement: The lock requires 4 AAA batteries. When the battery is low, the lock will provide a reminder. Replace all four batteries simultaneously with new alkaline 1.5V AAA batteries.
- Emergency Power: If the batteries completely drain, you can use a power bank connected via the USB Type-C emergency charging port to temporarily power the lock and unlock it. Alternatively, use the mechanical key.
- Cleaning: Clean the lock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
- Fingerprint Sensor: Keep the fingerprint sensor clean and dry for optimal performance.
6. Troubleshooting
- Lock not responding: Check battery levels. If low, replace batteries or use emergency USB power.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint if the issue persists.
- Password not working: Double-check the entered password. Ensure you are not accidentally triggering the virtual password feature incorrectly.
- App connection issues: Ensure Bluetooth is enabled on your phone and the lock is within range. For remote access, verify your Tuya WiFi Gateway is properly connected and configured.
- Handle direction needs adjustment: Refer to Section 3.1 and Figure 3 for instructions on adjusting the set screw to change the handle direction.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XSDTS |
| Model Number | FT001 (XSDTS Model F2) |
| Ways To Unlock | Fingerprint, Password, IC Card, Mechanical Keys, App (Tuya Bluetooth) |
| Fingerprint Type | Semiconductor |
| Recognition Speed | 0.3 seconds |
| Fingerprint Capacity | 50 fingerprints (First three are administrators) |
| Password Capacity | 100 sets of passwords |
| Main Material | Aluminium Alloy |
| Power Supply | 4pcs AAA battery (alkaline 1.5V batteries) |
| Power Supply Interface | Type-C interface (for emergency charging) |
| Working Voltage | 4pcs AAA battery |
| Working Temperature | -20°C ~ 50°C |
| Protection Level | No Waterproof (Indoor use recommended) |
| Connectivity | Bluetooth (Tuya Smart App) |
| Smart Home Platform | Tuya |
| Installation Method | Drilling installation |
| Fit Door Thickness | 35-70mm |
| Suitable Door Type | Wooden, Stainless Steel, Bronze, Double, Old-fashioned Security Doors |
| Handle Direction | Direction Reversible (Left Open and Right Open All compatible) |
| Language | English Voice and menu |
| Certification | CE |
8. User Tips
- Card Unlocking: The lock supports IC card unlocking. Typically, 2-3 cards are included with the lock. Ensure they are properly registered through the app or lock interface.
- Outdoor Use: The product is listed as "No Waterproof". It is recommended for indoor use or in areas protected from direct weather exposure to ensure longevity and proper function.
- Manual Availability: An English language instruction manual is provided to assist with installation and setup.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact XSDTS customer service. Keep your purchase receipt as proof of purchase.
