BASEUS Bowie E19

Baseus Bowie E19 True Wireless Earphones User Manual

Model: Bowie E19

1. Introduction

The Baseus Bowie E19 True Wireless Earphones are designed to deliver a powerful audio experience with enhanced bass, clear calls, and reliable performance in various conditions. Featuring 12mm dynamic drivers, Bluetooth 5.3 connectivity, and IPX5 water resistance, these earbuds offer up to 33 hours of total playtime with the charging case.

2. Package Contents

Please check the package for the following items:

  • Baseus Bowie E19 True Wireless Earphones (Left and Right)
  • Charging Case
  • User Manual
  • Charging Cable (Type-C)
  • Replaceable Eartips Set
Baseus Bowie E19 Earphones and accessories in packaging
Figure 2.1: Package Contents

3. Product Overview

The Baseus Bowie E19 earphones are designed for comfort and functionality. Below are key features and components:

Baseus Bowie E19 True Wireless Earphones and Charging Case
Figure 3.1: Baseus Bowie E19 Earphones and Charging Case (Black)
Baseus Bowie E19 True Wireless Earphones and Charging Case (White)
Figure 3.2: Baseus Bowie E19 Earphones and Charging Case (White)

3.1 Key Features

  • Powerful Bass: Oversized 12mm dynamic drivers for strong, accurate ultra-low frequencies.
  • IPX5 Waterproof: Resilient against sweat and raindrops.
  • 33H Long Playtime: 6 hours on a single charge, extended to 33 hours with the charging case.
  • 2-Mic ENC: AI noise-canceling algorithm for clear call quality.
  • Intelligent Touch Controls: Capacitive touch technology for responsive control.
  • Bluetooth 5.3: Faster, more reliable, and power-efficient connection.
Diagram of 12mm PU diaphragm driver for powerful bass
Figure 3.3: 12mm PU Diaphragm Driver
Earbuds in water demonstrating IPX5 waterproof rating
Figure 3.4: IPX5 Waterproof Protection
Earbud with sound wave illustration for clear calls
Figure 3.5: Crystal-Clear Calls with 2-Mic ENC
Close-up of earbud showing touch control area
Figure 3.6: Simple Touch Controls
Diagram of Bluetooth 5.3 chip for stable connection
Figure 3.7: Bluetooth 5.3 Connectivity
Video 3.1: Baseus Bowie E19 TWS Earbuds Overview

4. Setup

4.1 Initial Charging

  1. Place both earbuds into the charging case.
  2. Connect the charging case to a power source using the provided Type-C charging cable.
  3. The indicator light on the charging case will show charging status. Ensure the earbuds and case are fully charged before first use.

4.2 Bluetooth Pairing

  1. Open the charging case. The earbuds will automatically enter pairing mode, and their indicator lights will flash.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth.
  3. Search for "Baseus Bowie E19" in the list of available Bluetooth devices.
  4. Select "Baseus Bowie E19" to connect. Once connected, the earbud indicator lights will turn off or show a steady light, and you will hear a confirmation tone.

The earphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

5. Operating Instructions

5.1 Touch Controls

The Baseus Bowie E19 earphones feature intuitive touch controls on each earbud. The capacitive touch technology ensures responsive interaction.

ActionFunction
Single Tap (Left/Right)Play/Pause Music, Answer/End Call
Double Tap (Left)Previous Track
Double Tap (Right)Next Track
Long Press (Left/Right)Reject Call, Activate Voice Assistant
Triple Tap (Left/Right)Toggle Low Latency Mode (if available)

5.2 Power On/Off

  • Power On: Open the charging case, or long-press the touch area on both earbuds for 3 seconds.
  • Power Off: Place the earbuds back into the charging case and close the lid, or disconnect from Bluetooth and they will power off automatically after a few minutes.

5.3 Charging

  • Earbuds: Place them in the charging case. They will charge automatically.
  • Charging Case: Connect the Type-C cable to the charging port on the case and a power source. The indicator light will show charging status.
Earbuds in charging case with charging cable connected
Figure 5.1: Charging the Earbuds and Case

6. Maintenance

  • Cleaning: Regularly clean the earbuds and charging case with a soft, dry cloth. Avoid using abrasive materials or harsh chemicals.
  • Eartips: Remove and clean the eartips periodically to prevent wax buildup, which can affect sound quality. Ensure they are completely dry before reattaching.
  • Charging Contacts: Keep the charging contacts on both the earbuds and the case clean and dry to ensure proper charging.
  • Water Resistance: The earbuds are IPX5 water-resistant, meaning they can withstand sweat and light rain. Do not submerge them in water or expose them to heavy downpours. Ensure they are dry before placing them back in the charging case.
  • Storage: Store the earbuds in their charging case when not in use to protect them and keep them charged. Avoid extreme temperatures.

7. Troubleshooting

7.1 Pairing Issues

  • Earbuds not pairing with device: Ensure Bluetooth is enabled on your device and the earbuds are in pairing mode. Try turning Bluetooth off and on again on your device.
  • Only one earbud working: Place both earbuds back into the charging case, close the lid, wait a few seconds, then open it again. This often resets the connection between the two earbuds.
  • Earbuds not appearing in Bluetooth list: Ensure the earbuds are charged. Try resetting the earbuds (refer to the full user manual for specific reset instructions if needed).

7.2 Sound Issues

  • No sound or low volume: Check the volume levels on both your device and the earbuds. Ensure the earbuds are properly seated in your ears and the eartips are clean.
  • Poor sound quality: Ensure there are no obstructions between your device and the earbuds. Move closer to your device. Check for any firmware updates for the earbuds (if applicable via a companion app).

7.3 Charging Issues

  • Earbuds not charging: Ensure the charging contacts on both the earbuds and the case are clean and dry. Make sure the charging cable is securely connected and the power source is working.
  • Charging case not charging: Try a different Type-C cable or power adapter.

8. Specifications

ParameterValue
Product NameBaseus True Wireless Earphones
Model No.Baseus Bowie E19
Color OptionsStellar White, Cluster Black
MaterialABS, Plastic (ABS+PC)
Weight (Earbuds + Case)92g (Total), 46.2g (Case)
Bluetooth Version5.3
Communication Distance<10m
Music Playing Time (Earbuds)Approx. 6 hours (at 70% volume)
Total Playtime with Charging CaseUp to 33 hours
Earphone Battery Capacity35mAh / 0.129Wh
Charging Case Battery Capacity500mAh / 1.85Wh
Earphone Rated InputDC5V = 70mA
Charging Case Rated InputDC5V = 360mA
Earphone Rated Consumption Current6mA
Charging Case Rated Consumption Current500mA
Charge TimeApprox. 1.5 hours
Frequency Response Range20 Hz - 20 kHz
Charging InterfaceType-C
Waterproof RatingIPX5
CertificationsCE, FCC, RoHS

*The above parameters are measured manually. It is normal for errors of 3-5mm to occur. Data from Baseus laboratory, actual use may vary.

Product dimensions and basic specifications
Figure 8.1: Product Dimensions and Basic Specifications
Detailed technical specifications table
Figure 8.2: Detailed Technical Specifications

9. User Tips

  • App Compatibility: While not explicitly stated for this model, some Baseus products support a companion app for additional features and firmware updates. Check the official Baseus website or app stores for a compatible app for the Bowie E19.
  • iPhone Compatibility: The Baseus Bowie E19 earphones are compatible with iPhones and other Bluetooth-enabled devices, offering standard Bluetooth audio functionality.
  • Volume Control: The touch controls on the earbuds do not directly control volume. Volume adjustments should be made via your connected device.

10. Warranty and Support

Baseus products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Baseus website or contact your local distributor. Keep your purchase receipt as proof of purchase.


Baseus Bowie E19 TWS Earbuds: Wireless Bluetooth 5.3 Earphones with Powerful Bass and IPX5 Water Resistance

Baseus Bowie E19 TWS Earbuds: Wireless Bluetooth 5.3 Earphones with Powerful Bass and IPX5 Water Resistance

0:54 • 1280×720 • promo

Related Documents - Bowie E19

Preview Baseus Bowie E20 TWS True Wireless Earphones Quick Start Guide
A concise guide to setting up and using your Baseus Bowie E20 TWS True Wireless Earphones, covering pairing, charging, and basic controls.
Preview Baseus Bowie M2+ True Wireless Earphones User Manual
Comprehensive user manual for Baseus Bowie M2+ true wireless earphones, covering setup, operation, features, safety information, and product specifications.
Preview Baseus Bowie E19 True Wireless Earphones Quick Start Guide
A quick start guide for the Baseus Bowie E19 True Wireless Earphones, covering pairing, powering on/off, controls, indicators, re-pairing, factory reset, warranty, and specifications.
Preview Baseus Bowie WX5 True Wireless Earphones User Manual
Comprehensive user manual for Baseus Bowie WX5 True Wireless Earphones, covering setup, features, troubleshooting, and safety information.
Preview Baseus Bowie W15 True Wireless Earphones User Manual
Comprehensive user manual for Baseus Bowie W15 True Wireless Earphones, covering setup, operation, features, troubleshooting, and specifications.
Preview Baseus Bowie E3 & E12 TWS True Wireless Bluetooth Earphones User Manual | Guide & Specs
Comprehensive user manual for Baseus Bowie E3 and E12 TWS true wireless Bluetooth earphones. Learn about pairing, controls, charging, troubleshooting, and specifications for these stylish earbuds.