EPever UP1500-M3222

Contents

EPever UP1500-M3222 UPower Inverter/Charger Instruction Manual

Model: UP1500-M3222 | Brand: EPever

1. Introduction

The EPever UPower series is an advanced inverter/charger system designed for various power applications. This model, the UP1500-M3222, offers 1500W of continuous power and operates on a 24VDC battery system. It integrates an MPPT solar charge controller, a pure sine wave inverter, and an AC/DC charger into a single, compact unit. This all-in-one design allows the inverter and AC/DC charger to function simultaneously, making it ideal for residential use, schools, cottages, and areas with unstable electricity grids, or any application requiring an uninterruptible power supply.

EPever UPower Inverter/Charger product family overview

Figure 1: EPever UPower Inverter/Charger Product Family

2. Safety Information

Please read all instructions and warnings carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury. Keep this manual for future reference.

  • Ensure all wiring is performed by qualified personnel.
  • Do not disassemble or attempt to repair the unit yourself. Contact qualified service personnel.
  • Keep the unit away from water, moisture, and flammable materials.
  • Ensure proper ventilation to prevent overheating.
  • Always disconnect power sources (solar, utility, battery) before performing any maintenance or wiring.
  • Use appropriate circuit breakers and fuses as recommended in the wiring diagrams.

3. Product Features

The UPower series offers a range of advanced features for efficient and reliable power management:

  • Advanced MPPT Technology: Achieves a maximum tracking efficiency of 99.5% for optimal solar energy harvesting.
  • High DC-DC Conversion Efficiency: Up to 98.5% efficiency for DC-DC power conversion.
  • All-Digital Control: Features advanced all-digital control, adapting AC-DC charging modules with wide voltage input, high efficiency, and high stability for utility charging.
  • Multiple Charging Modes: Supports four charging modes: Utility Priority, Solar Priority, Utility & Solar, and Solar only.
  • Dual Output Modes: Provides two output modes: Battery and Utility.
  • Rich Set of Options: Configurable charging current, battery type, battery voltage threshold, and other parameters.
  • Communication Interface: Standard RS485 isolated communication interface with 5V 200mA output, supporting optional WiFi and GPRS modules for remote monitoring.
  • Extensive Electronic Protection: Includes short circuit protection and battery reverse polarity protection.
Detailed features of the UPower inverter/charger, including MPPT efficiency, digital control, charging modes, and output modes.

Figure 2: UPower Inverter/Charger Key Features

More detailed features, including options, communication interfaces (RS485), and electronic protection.

Figure 3: UPower Inverter/Charger Advanced Features

4. Components and Interface Identification

Familiarize yourself with the various components and interfaces of your UPower inverter/charger:

Front and rear view of the UPower inverter/charger with numbered components.

Figure 4: UPower Inverter/Charger Front and Rear Panels

No. Component
1Ventilation
2M4 Screw (2 pcs)
3AC Output Terminals
4Utility Input Terminals
5Battery Input Terminals
6RTS Interface
7Dry Contact Interface
8Remote Interface
9RS485 Interface (5VDC/200mA)
10Inverter/Charger Switch
11PV Input Terminals
12Terminals Cover

5. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your UPower inverter/charger. Refer to the following diagrams for typical system connections.

5.1 System Overview

Diagram showing the internal components and power flow of the UPower inverter/charger.

Figure 5: UPower Inverter/Charger Internal Power Flow Diagram

5.2 Solar System Connection

The UPower inverter/charger can be integrated into various solar power systems. Below are common wiring configurations:

Connection to Utility (Grid)

Wiring diagram for connecting the UPower inverter/charger to utility power, solar panels, and batteries.

Figure 6: Utility Connection Diagram

Connection to Generator

Wiring diagram for connecting the UPower inverter/charger to a generator, solar panels, and batteries.

Figure 7: Generator Connection Diagram

Important Note: Utility power supply and Battery power supply cannot be carried out simultaneously. Ensure proper switching mechanisms are in place to prevent conflicts.

5.3 Typical Solar Home System Diagram

Diagram illustrating a solar home system setup with the UPower inverter/charger, solar panels, batteries, and AC loads.

Figure 8: Typical Solar Home System Setup

5.4 Communication Connections

The UPower inverter/charger features an RS485 interface for communication. Optional WiFi or GPRS modules can be connected for remote monitoring and control via a PC or mobile application.

Diagram showing RS485 communication interface for PC and optional WiFi module for app connectivity.

Figure 9: Communication Interface Connections

6. Operating Instructions

The UPower inverter/charger is equipped with an LCD display for monitoring system status and configuring settings. Refer to the detailed user manual (if available) for specific menu navigation and parameter adjustments.

  • Power On/Off: Use the Inverter/Charger Switch (10) to power the unit on or off.
  • Monitoring: The LCD display provides real-time information on battery status, solar charging, AC input/output, and load.
  • Charging Mode Selection: Configure your preferred charging mode (Utility Priority, Solar Priority, Utility & Solar, or Solar only) via the unit's interface or connected monitoring software.
  • Output Mode Selection: Choose between Battery or Utility output modes based on your power requirements.
  • Parameter Settings: Adjust charging current, battery type, and voltage thresholds as needed for your specific battery bank.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your UPower inverter/charger.

  • Cleaning: Periodically clean the exterior of the unit and ensure ventilation openings (1) are free from dust and debris. Use a dry, soft cloth.
  • Connection Checks: Annually inspect all electrical connections (AC input/output, PV input, Battery input) for tightness and corrosion.
  • Battery Inspection: Follow the manufacturer's recommendations for battery maintenance.
  • Environment: Ensure the operating environment remains within specified temperature and humidity ranges.

8. Troubleshooting

If you encounter issues with your UPower inverter/charger, consider the following basic troubleshooting steps:

  • No Power Output:
    • Check if the Inverter/Charger Switch (10) is in the 'ON' position.
    • Verify battery connections and voltage.
    • Check AC input and output circuit breakers.
    • Ensure no overload condition is present.
  • No Solar Charging:
    • Check PV input connections and voltage.
    • Ensure solar panels are receiving adequate sunlight.
    • Verify PV input terminals (11) are correctly wired.
  • Abnormal Display/Indicators:
    • Refer to the detailed user manual for specific error codes or indicator meanings.
    • Restart the unit by cycling the power switch.

For persistent issues, contact customer support or a qualified technician.

9. Specifications

Detailed technical specifications for the UPower series, including the UP1500-M3222 model:

Parameter UP1000-M3212 UP1000-M3222 UP1500-M3222 UP2000-M3322
Nominal battery voltage12VDC24VDC24VDC24VDC
Battery input voltage range10.8~16VDC21.6~32VDC21.6~32VDC21.6~32VDC
Inverter Output
Continuous output power800W800W1200W1600W
Output power 15min.1000W1000W1500W2000W
Output voltage range220V(-6%~+5%) 230V(-10%~+5%)220V±5%;230V (-10%~+5%)220V±5%;230V (-10%~+5%)220V±5%;230V (-10%~+5%)
Output frequency50/60±0.1Hz
Output modeSingle phase
Output wavePure Sine Wave
Distortion THD≤3%(12V or 24V resistive load)
Max.efficiency91%94%95%95%
Utility Charging
Utility input voltage range160VAC~280VAC (Working voltage range); 170VAC~270VAC (Utility starting voltage range)
Max.utility charge current20A20A20A30A
Solar Charging
Max. PV open circuit voltage60V (At minimum operating environment temperature); 46V (At 25℃ environment temperature)100V (At minimum operating environment temperature); 92V (At 25℃ environment temperature)
Max. PV input power390W780W780W780W
Max. PV charging current30A30A30A30A
Equalization voltageSealed:14.6V, Flooded:14.8VSealed:29.2V,Flooded:29.6V
Boost voltageGel:14.2V, Sealed:14.4V, Flooded:14.6VGel:28.4V,Sealed:28.8V,Flooded:29.2V
Float voltageGel/Sealed/ Flooded:13.8VGel/Sealed/Flooded:27.6V
Tracking efficiency≤99.5%
Charging conversion efficiency≤98%
Temperature compensation-3mV/℃/2V (Default)
Other Specifications
No load consumption≤1.2A≤0.6A≤0.6A≤0.8A
EnclosureIP30
Operating temperature range-20℃~50℃ (full input and output with no derating)
Dimensions (HxWxL)386×300×126mm386×300×126mm386×300×126mm444×300×126mm
Net weight7.3kg7.3kg7.4kg8.5kg

10. User Tips

  • Battery Compatibility: Always ensure your battery bank's voltage and type are compatible with the inverter's settings to prevent damage and ensure optimal charging.
  • Load Management: Avoid consistently running loads close to the inverter's maximum continuous output power. Leave some headroom for peak demands and to extend the unit's lifespan.
  • Monitoring: Utilize the RS485 communication port with an optional WiFi or GPRS module to remotely monitor your system's performance and health. This allows for proactive management and troubleshooting.
  • Ventilation: Ensure the inverter is installed in a well-ventilated area. Proper airflow is critical to prevent overheating, especially during high-load operation or in warm climates.

11. Warranty and Support

The EPever UP1500-M3222 UPower Inverter/Charger comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or service inquiries, please contact your authorized dealer or EPever customer service. Ensure you have your product model number and purchase details available.

12. Application Scenarios

The UPower inverter/charger is versatile and suitable for a wide range of applications, including:

  • Solar Home Systems
  • Solar Camping Systems
  • Solar Monitoring Systems
  • Solar Marine Systems (Boats)
  • Solar RV Systems
  • Solar Street Lighting Systems
  • General household appliances and electric tools
  • Commercial units requiring stable power
Collage of application scenarios for the UPower inverter/charger, including solar home, camping, monitoring, marine, RV, and street lighting systems.

Figure 10: Diverse Application Scenarios

Another collage of application scenarios, including solar RV, solar boat, solar home, and solar wind energy.

Figure 11: Additional Application Examples

13. Certifications

The UPower series inverter/charger complies with various international standards and holds the following certifications:

  • CE
  • ROHS
  • FCC
  • IEC
  • UL (where applicable)
Certifications for the UPower series, including CE, ROHS, etc.

Figure 12: Product Certifications

Additional certifications for the UPower series.

Figure 13: Further Certifications

© 2023 EPever. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.