1. Introduction
The XSDTS Tuya Wifi Electronic Smart Door Lock F8 offers advanced security and convenience for your home or office. Featuring multiple unlocking methods including biometric fingerprint, smart card, password, and mechanical key, alongside a built-in camera and Wi-Fi connectivity, this smart lock provides comprehensive access control and monitoring capabilities.
Key Features:
- Multiple Unlock Methods: Fingerprint, Password, IC Card, Mechanical Key, APP.
- Built-in Camera & HD Screen: For real-time monitoring and visual verification.
- Wide-Angle Peephole: Offers a broader viewing scope.
- Automatic Light Adjustment: Ensures clear visibility even at night.
- Virtual Password: Anti-peeping feature for enhanced security.
- Multi-State Alarms: Low battery alarm, trying alarm.
- Tuya Smart Life APP Integration: Remote control and management.
- USB Emergency Charging: For power outages.
2. Product Components
Before installation, ensure all components are present:
- Front Lock Panel (with camera, keypad, fingerprint sensor)
- Rear Lock Panel (with HD screen, battery box, screen buttons)
- Mortise Lock Body
- Square Shaft (various lengths)
- Screws (various lengths for different door thicknesses)
- Magnetic Cards (IC Cards)
- Mechanical Keys
- Reversing Screw (for handle direction adjustment)
- Data Cables

3. Installation Guide
Proper installation is crucial for the optimal performance and security of your smart lock. Please follow these steps carefully.
3.1. Pre-Installation Checks
Before beginning installation, measure your door and existing mortise lock to ensure compatibility. The lock is suitable for door thicknesses between 40-70mm and is compatible with wooden, stainless steel, bronze, double, and old-fashioned security doors. It is not suitable for sliding doors.


3.2. Adjusting Handle Direction
The handle direction can be adjusted to suit your door's opening. Refer to the diagram below for guidance.
- Loosen the screw on the front handle.
- Rotate the handle to the desired direction (e.g., right-open to left-open).
- Tighten the screw to secure the handle.

3.3. Installing the Mortise Lock
- Insert the mortise lock into the door edge.
- Secure the mortise lock with the provided screws.
- Adjust the reversing screw on the mortise according to the door opening direction (refer to the diagram in Figure 3.3). For a single tongue lock, the clutch arrow should point to the opposite side of the handle. For a double tongue lock, push the clutch arrow upwards.
3.4. Connecting Data Cables and Mounting Lock Panels
- Carefully pass the data cables through the door hole to prevent pinching or damage.
- Connect the data cables from the front and rear lock panels.
- Organize any extra cable length neatly within the door.
- Align the lock panels with the square shaft and secure them to the door using the appropriate length screws.
3.5. Battery Installation
- Open the battery cover on the rear lock panel.
- Insert 4 AAA batteries, ensuring correct polarity.
- Close the battery cover.
4. Operating Instructions
4.1. Unlocking Methods
The XSDTS F8 smart lock offers multiple ways to unlock:
- Fingerprint Unlock: Place your registered finger on the semiconductor fingerprint sensor. The lock will unlock in approximately 0.5 seconds.
- Password Unlock: Enter your registered password on the digital keypad. For enhanced security, use the virtual password feature by inputting random numbers before or after your correct password.
- IC Card Unlock: Present your registered IC card to the card reader area.
- Mechanical Key Unlock: In case of emergency or battery depletion, use the mechanical key to unlock the door.
- APP Unlock: Use the Tuya Smart Life app on your smartphone for remote unlocking.


4.2. Built-in Doorbell and Camera
The smart lock features an in-built doorbell and camera. When the doorbell is pressed, the peephole and HD screen trigger, and the outside scene is sent to your cellphone via the Tuya app.

4.3. Internal Lock Button
The internal lock button provides an additional layer of security. When activated, common users outside cannot unlock the door, even with valid credentials. This is useful for privacy and security when inside the home.
5. Maintenance
- Battery Replacement: Replace all 4 AAA batteries when the low battery alarm is triggered. Do not mix old and new batteries.
- Cleaning: Use a soft, dry cloth to clean the lock's surface, fingerprint sensor, and camera lens. Avoid abrasive cleaners or solvents.
- Sensor Care: Keep the fingerprint sensor and camera lens free from dirt, dust, and moisture to ensure optimal performance.
- Firmware Updates: Regularly check the Tuya Smart Life app for any available firmware updates to ensure your lock has the latest features and security enhancements.
6. Troubleshooting
- Lock not responding: Check battery levels. If batteries are low, replace them or use the USB emergency charging port.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint if the issue persists.
- Password not working: Double-check the entered password. Ensure the virtual password feature is not causing confusion.
- App connectivity issues: Ensure your Wi-Fi network is stable and the lock is within range. Restart the app and the lock if necessary.
- Factory Reset: If you encounter persistent issues, perform a factory reset by pressing the reset button for 5 seconds (refer to Video 3.1 for location). Note that this will erase all user data and settings.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XSDTS |
| Model Number | F8 |
| Color | Black |
| Material | Aluminium alloy |
| Power Supply | DRY BATTERY (4pcs AAA battery) |
| Charging | Support USB charge |
| Connectivity | WiFi |
| Smart Home Platform | Tuya |
| APP Name | Tuya Smart Life |
| Unlock Methods | Fingerprint, Password, IC Card, Mechanical Key, APP, Temporary Password |
| Fingerprint Sensor | Semiconductor |
| Fingerprint Capacity | 100 pcs |
| Password & Card Capacity | 100 groups (Password), 2 pcs (IC Cards) |
| Mechanical Keys | 2 pcs |
| Working Current | 300mA |
| Working Humidity | -10°C ~ 60°C |
| Protection Level | No Waterproof |
| Suitable for Mortise | 5050 |
| Installation Method | Drilling installation |
| Fit Door Thickness | 40-70mm |
| Suitable Door Type | Wooden, Stainless Steel, Bronze, Double, Old-fashioned Security Doors |
| Handle Direction | Direction Reversible (Left Open and Right Open All compatible) |
| Special Features | Built-in Doorbell, Built-in Camera, Built-in Peephole, Built-in Screen |
| Certifications | CE, FCC |
8. User Tips
- Door Thickness: Ensure your door thickness is between 40-70mm for proper installation. If your door is 35mm, this lock may not be suitable.
- Door Type: This lock is designed for wooden, stainless steel, bronze, double, and old-fashioned security doors. It is not compatible with sliding doors.
- Auto-Lock Feature: The lock typically has an auto-lock feature when the door is closed, providing immediate security. Verify this setting in the app or lock menu.
- Remote Access: Utilize the Tuya Smart Life app for convenient remote unlocking and monitoring, especially when guests arrive.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.