MN Model MN82

Contents

MN82 1:12 Full Scale RC Car Instruction Manual

Model: MN82 | Brand: MN Model

1. Introduction

Thank you for purchasing the MN82 1:12 Full Scale MN Model RTR Version RC Car. This 2.4G 4WD proportional off-road remote control car is designed for enthusiasts aged 14 and above, offering a realistic driving experience with its detailed design and robust features. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new RC car to ensure optimal performance and enjoyment.

MN82 and LC79 RC cars, officially licensed Toyota Land Cruiser models, displayed on rocky terrain.
The MN82/LC79 models are officially licensed Toyota Land Cruiser products, showcasing their detailed design and off-road capabilities.

2. Safety Warnings

  • WARNING: Not suitable for children under 36 months. Contains small parts which may pose a choking hazard.
  • Always operate the RC car in open areas, away from people, pets, and obstacles.
  • Do not operate near public roads, water, or high-voltage power lines.
  • Ensure batteries are charged correctly and handled with care. Do not short-circuit or puncture batteries.
  • Turn off the RC car and remote control when not in use to prevent accidental operation.
  • Adult supervision is recommended for younger users.

3. Package Contents

The MN82 RC Car package includes the following items:

  • 1 x MN82 RC Car (Ready-to-Run)
  • 1 x 2.4G Remote Control
  • 1 x 7.4V 500mAh Lithium Battery (pre-installed or included for the car)
  • 1 x USB Charging Cable
Red MN82 RC car with its included accessories: a green battery pack, a black USB charger, and a black remote control.
The MN82 RC car and its essential accessories, including the battery, USB charger, and remote control.

4. Specifications

FeatureDetail
Model NumberMN-82
Scale1:12
MaterialMetal, Plastic (ABS)
Product Dimensions36 x 16 x 16 cm
Color OptionsRed, Yellow
Drive System4WD
Motor280 Strong Magnetic Motor
Servo17g Waterproof Servo
Body Battery7.4V 500mAh Lithium Battery
Remote Control Battery2 x 1.5V AA (not included)
Charging Voltage5V (via USB Charger)
Charging TimeApproximately 3 hours
Play TimeApproximately 30-40 minutes
Remote Control Frequency2.4G (Full-ratio servo upgraded)
Remote Control DistanceApproximately 50 meters
Max Speed8 km/h
Max Grade Ability46 degrees
Angle of Approach52 degrees
Chassis Clearance40 mm
Angle of Departure39 degrees
Tire Diameter62 mm
Tire Width24 mm
Rim Diameter37 mm
Wheel Adapter5 mm
State of AssemblyReady-to-Go (RTR)
Recommended Age14+ years
FeaturesRemote Control, Front Lights, Rear Lights, Turn Signals, Detailed Design, Forward/Backward, Turn Left/Right
Detailed product data table for the MN82 RC car, showing model, remote control, scale, motor, battery, charging, play time, lights, and dimensions.
Comprehensive product data for the MN82 RC car, including performance metrics and dimensions.
Diagram illustrating the off-road parameters of the MN82 RC car, including max grade ability (46 degrees), angle of approach (52 degrees), chassis clearance (40mm), and angle of departure (39 degrees).
Off-road performance parameters of the MN82, highlighting its climbing and obstacle-crossing capabilities.
Image showing the tire specifications of the MN82 RC car, including a diameter of 62mm, width of 24mm, rim diameter of 37mm, and a 5mm adapter.
Detailed tire and wheel specifications for the MN82 RC car.

5. Setup Guide

5.1. Charging the Car Battery

  1. Locate the 7.4V 500mAh Lithium Battery. The MN82 features an openable hood for convenient battery access.
  2. Connect the battery to the included USB charging cable.
  3. Plug the USB charging cable into a compatible 5V USB power source (e.g., computer USB port, USB wall adapter).
  4. Charging Status: During charging, the red light on the USB charger will be on, and the green light will be flashing.
  5. Full Power Indication: Once fully charged (approximately 3 hours), both the red and green lights on the charger will be on continuously.
  6. Disconnect the battery from the charger once fully charged.
Red MN82 RC car with its hood open, revealing the battery compartment and the green battery pack inside. Below, a USB balance charger is shown with charging status indicators.
The MN82 features an easily accessible battery compartment under the hood. The USB charger includes indicators for charging status and overcharge protection.

5.2. Installing Remote Control Batteries

  1. Locate the battery compartment on the back of the remote control.
  2. Open the battery cover.
  3. Insert 2 x 1.5V AA batteries (not included), ensuring correct polarity (+/-).
  4. Close the battery cover securely.

5.3. Powering On and Pairing

  1. Ensure the car battery is fully charged and installed.
  2. Turn on the RC car using the power switch located on the chassis.
  3. Turn on the remote control using its power switch.
  4. The remote control and car should automatically pair. If not, turn both off and on again. The 2.4G system ensures a stable connection.

6. Operating Your RC Car

6.1. Remote Control Functions

Diagram of the 2.4G remote control for the MN82 RC car, labeling its various functions: Remote light, Steering trim, Speed fast/slow switch, Power switch, Proportional steering wheel, Proportional throttle trigger, and Max distance 50m.
The 2.4G remote control features proportional steering and throttle, along with switches for speed and lights.
  • Proportional Throttle: Use the trigger to control forward and backward movement. Pull the trigger to accelerate forward, push it to brake or reverse. The further you pull/push, the faster the car moves.
  • Proportional Steering: Turn the steering wheel left or right to control the car's direction. The amount you turn the wheel corresponds to the steering angle of the car.
  • Speed Switch (Fast/Slow): Adjust the maximum speed of the car using this switch. 'Fast' mode provides full power, while 'Slow' mode is ideal for beginners or precise control.
  • Steering Trim: If the car doesn't drive straight when the steering wheel is centered, use the steering trim dial to fine-tune the steering until it tracks straight.
  • Remote Light Control: The remote control has a dedicated button or switch to turn the car's front and rear lights on or off.
  • Power Switch: Turns the remote control on/off.

6.2. Driving Tips

  • Start in 'Slow' speed mode to get accustomed to the controls.
  • Practice steering and throttle control in an open, flat area before attempting more challenging terrain.
  • The MN82 is designed for off-road use. Explore various terrains like dirt, gravel, and grass.
  • Avoid driving in deep water or mud, despite the waterproof servo, to protect other electronic components.
  • When the car's performance decreases, it's likely due to a low battery. Recharge the car battery promptly.
A hand holding the remote control, operating the red MN82 RC car on a rocky, mountainous terrain, demonstrating its off-road capability.
Experience realistic off-road driving with the MN82's proportional control and 4WD system.

7. Maintenance

  • Cleaning: After each use, especially after driving in dirt or mud, clean the car with a soft brush or cloth. Avoid using water directly on electronic components.
  • Battery Care: Always fully charge the car battery before storage and recharge it every 1-2 months if not used regularly to maintain battery health. Do not over-discharge the battery.
  • Storage: Store the RC car and remote control in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote control if storing for extended periods.
  • Inspection: Regularly check for loose screws, damaged parts, or debris caught in the wheels or chassis. Replace any damaged parts promptly.
  • Chassis Structure: The MN82 features a robust chassis with front four-link suspension and rear simulated steel plate suspension. Periodically inspect these components for wear.
Exploded view diagram of the MN82 RC car chassis, showing the front four-link suspension, rear simulated steel plate suspension, power switch, simulated frame, integrated control main board, 280 motor, and 17g waterproof servo.
Detailed view of the MN82 chassis structure, highlighting key components like the motor, servo, and suspension system.

8. Troubleshooting

  • Car not turning on:
    • Ensure the car battery is fully charged and properly connected.
    • Check if the car's power switch is in the 'ON' position.
  • Remote control not responding:
    • Check if the remote control batteries are installed correctly and have sufficient power. Replace if necessary.
    • Ensure both the car and remote control are powered on and within range (approx. 50 meters).
    • Re-pair the remote control and car by turning both off and then on again.
  • Short play time:
    • The car battery may not be fully charged. Ensure it charges for the recommended 3 hours.
    • Battery degradation over time is normal. Consider replacing the battery if play time significantly decreases despite proper charging.
  • Car pulls to one side:
    • Use the steering trim dial on the remote control to adjust the steering until the car drives straight.
    • Check for any debris or damage to the steering mechanism or wheels.

9. User Tips

  • Check All Accessories: Upon receiving your MN82 RC car, carefully unbox and verify that all listed package contents are present and undamaged before initial use.
  • Battery Management: For optimal battery life and performance, avoid completely draining the car's battery. Charge it when you notice a significant drop in power.
  • Explore Terrain: The MN82 is built for off-road adventures. Don't hesitate to test its capabilities on varied surfaces like gravel, dirt, and small obstacles, but always within safe limits.
  • Headlights Feature: Utilize the controllable headlights for enhanced visibility during low-light conditions or for a more realistic driving experience.
Yellow MN82 RC car with its headlights illuminated, driving through a forest at dusk, showcasing its functional lighting.
The MN82 features functional headlights for realistic driving, even in low-light conditions.

10. Warranty and Support

For warranty information, technical support, or replacement parts, please refer to the seller's specific policies or contact the retailer where you purchased the product. Keep your proof of purchase for any warranty claims.

© 2023 MN Model. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.