1. Introduction
Thank you for choosing the Awei T87 TWS Earbuds. These true wireless stereo earbuds are designed to provide a high-quality audio experience with advanced features like Bluetooth 5.3 connectivity, low latency for gaming, and a comfortable, mini design. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

2. Package Contents
Please check the box for the following items:
- Awei T87 TWS Earbuds (Left and Right)
- Charging Case
- Charging Cable (Type-C)
- User Manual

3. Product Overview
The Awei T87 earbuds feature a compact, semi-open design for comfortable wear. They are equipped with 13mm dynamic drivers for HIFI sound quality and a microphone for HD calls. The charging case provides extended battery life and convenient storage.

Key Features:
- Bluetooth 5.3: For stable and quick connection with lower delay.
- IPX6 Waterproof: Provides protection against strong jets of water, suitable for sports and outdoor use.
- Built-in Battery: 35mAh per earbud, 250mAh in charging case.
- HD Call: Integrated microphone for clear voice calls.
- Low Latency: Approximately 0.06s game low delay for synchronized audio-visual experience.
- Touch Controls: For music playback, call management, and volume control.

4. Setup
4.1 Charging the Earbuds and Case
- Place the earbuds into the charging case. Ensure they are correctly seated; the indicator lights on the earbuds should illuminate.
- Connect the Type-C charging cable to the charging port on the case and the other end to a USB power source (e.g., wall adapter, computer USB port).
- The charging indicator on the case will show charging status. A full charge for the case and earbuds takes approximately 1 hour.
- Once fully charged, disconnect the charging cable.
Battery Life:
- Total battery life (with charging case): Up to 30 hours
- Earbud single music time: Up to 5.5 hours
- Earbud talk time: Up to 4 hours
- Standby time: Up to 300 hours

4.2 Pairing with a Bluetooth Device
- Power On: Open the charging case. The earbuds will automatically power on and enter pairing mode (indicator lights will flash).
- Activate Bluetooth: On your smartphone or other Bluetooth device, enable Bluetooth.
- Search for Device: In your device's Bluetooth settings, search for available devices.
- Select 'T87': From the list of devices, select 'T87' to connect.
- Confirmation: Once connected, you will hear an audio prompt, and the earbud indicator lights will stop flashing.
The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

5. Operating Instructions
The Awei T87 earbuds feature touch controls for easy management of music and calls.
5.1 Power On/Off
- Power On: Open the charging case, or long-press the touch area on both earbuds for a few seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch area on both earbuds for several seconds until you hear a power-off prompt.
5.2 Music Playback
- Play/Pause: Tap the touch area on either earbud once.
- Next Track: Double-tap the touch area on the right earbud.
- Previous Track: Double-tap the touch area on the left earbud.
- Volume Up: Triple-tap the touch area on the right earbud.
- Volume Down: Triple-tap the touch area on the left earbud.
5.3 Call Management
- Answer/End Call: Tap the touch area on either earbud once.
- Reject Call: Long-press the touch area on either earbud for 2 seconds.
5.4 Voice Assistant
- Activate Voice Assistant (Siri/Google Assistant): Long-press the touch area on either earbud for 3 seconds.
5.5 Gaming Mode (Low Latency)
The earbuds support a low-latency mode, ideal for gaming, to ensure audio and video are synchronized.
- Activate/Deactivate Gaming Mode: Specific gesture not provided, typically a quadruple-tap or a specific long-press. Refer to quick start guide if included.

6. Maintenance
6.1 Cleaning
- Use a soft, dry, lint-free cloth to clean the earbuds and charging case.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Clean the charging contacts on the earbuds and inside the case regularly with a dry cotton swab to ensure proper charging.
6.2 Storage
- When not in use, always store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place, away from extreme temperatures and direct sunlight.
6.3 Waterproofing
The Awei T87 earbuds are IPX6 waterproof. This means they are protected against high-pressure water jets from any direction. They are suitable for use during workouts or in light rain, but should not be submerged in water.
- Do not wear the earbuds while swimming or showering.
- If the earbuds get wet, wipe them dry thoroughly before placing them back in the charging case to prevent damage to the charging contacts.
7. Troubleshooting
- Earbuds not pairing with device:
- Ensure earbuds are charged and out of the case.
- Turn off and on Bluetooth on your device.
- Forget 'T87' from your device's Bluetooth list and try pairing again.
- Try pairing with another device to rule out device-specific issues.
- Only one earbud working:
- Place both earbuds back into the charging case, close the lid, and then take them out again.
- Ensure both earbuds are charged.
- Perform a factory reset (refer to specific instructions if available, usually involves long-pressing both earbuds while in the case or out).
- Earbuds not charging:
- Ensure the charging cable is securely connected to both the case and the power source.
- Check if the charging contacts on the earbuds and inside the case are clean and free of debris.
- Try a different charging cable or power adapter.
- Low volume or poor sound quality:
- Adjust the volume on both your device and the earbuds.
- Ensure the earbuds are properly seated in your ears.
- Clean any earwax or debris from the earbud mesh.
8. Specifications
| Feature | Specification |
|---|---|
| Model | T87 |
| Brand | Awei |
| Material | Metal, Plastic |
| Dimensions (Case) | 60mm (Length) x 50mm (Width) x 23mm (Depth) |
| Weight (Product) | 120g |
| Bluetooth Version | 5.3 |
| Wireless Range | <10m |
| Waterproof Rating | IPX6 |
| Driver Diameter | 13mm |
| Vocalism Principle | Dynamic |
| Frequency Response Range | 20 - 20000Hz |
| Sensitivity | 104dB |
| Impedance Range | up to 32 Ω |
| Resistance | 16Ω |
| Codecs | sbc |
| Microphone | Yes |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Charging Case Battery | 250mAh |
| Earbud Battery Capacity | 35mAh * 2 |
| Total Battery Life | Up to 30 hours |
| Music Playback Time (single charge) | Up to 5.5 hours |
| Talk Time | Up to 4 hours |
| Charging Time | Approx. 1 hour |
| Standby Time | 300 hours |
| Charging Method | Charging case (Type-C) |
| Voice Assistant Built-in | No (Supports Apple Siri via phone) |
| NFC Technology | No |
| Support APP | No |
| Certification | CE |

9. User Tips
- For optimal sound quality and comfort, try different ear tip sizes if available (though not explicitly listed in package contents, many earbuds come with options).
- Regularly clean the charging contacts to ensure consistent charging.
- When experiencing connection issues, a quick reset by placing earbuds back in the case and taking them out often resolves the problem.
- Keep the charging case charged, as it's essential for both charging and automatically powering on/off the earbuds.
10. Warranty & Support
Awei products are manufactured to the highest quality standards. For any issues or support, please refer to the seller's return policy or contact customer service. Keep your purchase receipt as proof of purchase.





