Silverflo 938BD-III

Contents

Silverflo 938BD-III Soldering Station Instruction Manual

Model: 938BD-III | Brand: Silverflo

1. Introduction

The Silverflo 938BD-III is a versatile 2-in-1 soldering and hot air rework station designed for precision electronics work. It features rapid heating capabilities for both the T12 soldering iron and the hot air gun, an auto-sleep function for energy saving and tip longevity, and digital temperature calibration for improved efficiency and accuracy. This manual provides detailed instructions for safe and effective use of your new soldering station.

2. Safety Warnings

  • Always operate the soldering station in a well-ventilated area to avoid inhaling fumes.
  • Wear appropriate personal protective equipment, including safety glasses, to protect against splashes and fumes.
  • The soldering iron tip and hot air gun nozzle reach very high temperatures. Avoid direct contact with skin or flammable materials.
  • Ensure the power cord is undamaged and properly connected to a grounded outlet.
  • Never leave the soldering station unattended while powered on.
  • Keep out of reach of children.
  • Disconnect power before performing any maintenance or changing accessories.

3. Package Contents

Please verify that all items are present in your selected package:

Silverflo 938BD-III Soldering Station Package 4 contents
Figure 1: Silverflo 938BD-III Soldering Station, Package 4 contents.
  • All Packages Include:
    • 938BD-III station with hot air gun handle and soldering iron handle
    • Soldering iron holder (1pc)
    • Air gun holder (1pc)
    • Air gun nozzles (3pcs)
  • Package 1: Includes all standard items.
  • Package 2: Includes all standard items + soldering iron tips (3pcs).
  • Package 3: Includes all standard items + small table lamp (1pc).
  • Package 4: Includes all standard items + soldering iron tips (3pcs) + small table lamp (1pc).
Silverflo 938BD-III Soldering Station Package 1 contents
Figure 2: Silverflo 938BD-III Soldering Station, Package 1 contents.

4. Key Features

  • Rapid Heating Soldering Iron: The soldering iron heats up quickly, featuring an integrated heating core for easy installation (applicable to original brand heating cores).
    Soldering iron tip heating rapidly
    Figure 3: Close-up of the soldering iron tip demonstrating rapid heating.
  • Auto Sleep Mode (10-Minute): When the station detects no usage or movement for longer than 10 minutes, the soldering iron will enter sleep mode. This feature effectively prevents oxidation of the soldering iron tip, extends its lifespan, saves energy, and protects the environment.
    Diagram showing auto-sleep mode activation
    Figure 4: Auto-sleep mode activation after 10 minutes of inactivity.
  • 2-in-1 Design: A new version combining a T12 soldering iron and a hot air gun station. The hot air gun activates when picked up and enters standby when placed back in its holder.
  • Digital Temperature Calibration: Allows for precise temperature adjustments, improving overall work efficiency.
    Step-by-step diagram for digital temperature calibration
    Figure 5: Digital temperature calibration process.
  • Multifunctional Soldering Iron Holder: Equipped with a metal cleaning ball and a cleaning sponge. It can be installed on top of the machine to save workspace.
    Multifunctional soldering iron holder with cleaning accessories
    Figure 6: Multifunctional soldering iron holder with metal cleaning ball and cleaning sponge.
  • Long Service Life Brushless Fan: The hot air gun features a brushless fan with safety and efficient auto start-stop technology. It provides extremely low noise (45dB) and a rotating wind tunnel for steady temperature and consistent heat output, with an air volume of ≤120L/min.
    Diagram of hot air gun brushless fan
    Figure 7: Internal view of the hot air gun's brushless fan for smooth air delivery.

5. Setup Instructions

  1. Unpacking: Carefully unpack all components from the packaging. Retain the packaging for future storage or transport.
  2. Assemble Soldering Iron Holder: Place the metal cleaning ball and cleaning sponge into their designated slots on the soldering iron holder. Insert the spring holder into its position. The holder can be attached to the top of the main unit for convenience.
  3. Connect Tools:
    • Connect the soldering iron handle cable to the port labeled "SOLDERING STATION" on the main unit.
    • Connect the hot air gun handle cable to the port labeled "REWORK STATION" on the main unit.
  4. Placement: Place the main unit on a stable, heat-resistant, and non-flammable surface. Ensure adequate clearance around the unit for ventilation.
  5. Power Connection: Connect the power cable to the main unit and then plug it into a suitable grounded electrical outlet. Ensure the voltage matches the unit's requirements (e.g., 120V US, 220V EU/UK/AU).
Video 1: Product overview and demonstration of assembly and use.

6. Operating Instructions

6.1. Power On/Off

Flip the main power switch located on the front panel to the "ON" position to power on the station. The LED displays will illuminate. To power off, flip the switch to "OFF".

6.2. Soldering Iron Operation

  1. Tip Installation: Ensure a T12 soldering tip is securely installed in the soldering iron handle.
  2. Temperature Adjustment: Use the "+" and "-" buttons located under the "SOLDERING STATION" display to set the desired temperature. The display will show the set temperature.
  3. Heating: The soldering iron will rapidly heat to the set temperature.
  4. Auto Sleep Mode: When you place the soldering iron in its holder and it remains inactive for 10 minutes, it will automatically enter sleep mode to preserve the tip and save energy. To wake it up, simply pick up the iron.

6.3. Hot Air Gun Operation

  1. Nozzle Attachment: Select the appropriate hot air nozzle for your task and securely attach it to the hot air gun.
  2. Temperature and Air Volume Adjustment: Use the rotary knob and buttons under the "REWORK STATION" display to set the desired temperature and air volume.
  3. Activation: Pick up the hot air gun from its holder to activate it. The fan will start, and it will begin heating to the set temperature.
  4. Rework: Direct the hot air flow to the desired area for desoldering or other rework tasks.
  5. Standby: Place the hot air gun back into its holder to activate standby mode. The unit will cool down the nozzle before turning off the fan.

6.4. Digital Temperature Calibration

To ensure accurate temperature readings, perform calibration as follows:

  1. Simultaneously press the "+" and "-" buttons on the soldering station.
  2. Measure the current actual temperature of the soldering iron tip using a reliable thermometer.
  3. Adjust the displayed temperature on the station to match the measured actual temperature.

7. Maintenance

  • Soldering Iron Tip Cleaning: Regularly clean the soldering iron tip using the provided metal cleaning ball to remove excess solder and residue. For further cleaning, use the damp cleaning sponge. Ensure the sponge is only damp, not soaking wet.
  • General Cleaning: Keep the main station unit and all tools clean and free of dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Tip Replacement: Replace soldering iron tips when they become worn, pitted, or no longer tin properly. Always ensure the station is powered off and the iron has cooled down before attempting to replace a tip.
  • Hot Air Nozzle Maintenance: Ensure hot air nozzles are clear of obstructions. Clean any residue from the nozzles as needed.

8. Troubleshooting

ProblemPossible CauseSolution
Station does not power onNo power supply; Main switch offCheck power cable connection; Ensure main switch is ON; Test wall outlet.
Soldering iron not heatingLoose connection; Incorrect temperature setting; Damaged tip/heating elementEnsure iron cable is securely connected; Verify temperature setting; Replace tip or heating element if damaged.
Hot air gun not workingLoose connection; Not picked up from holder; Incorrect settingsEnsure hot air gun cable is securely connected; Pick up gun from holder to activate; Verify temperature and air volume settings.
Inaccurate temperature readingNeeds calibrationPerform digital temperature calibration as per instructions.

9. Specifications

ParameterValue
Model938BD-III
Rated Power775W
DisplayLED
Hot Air Rework Station Temperature Range100℃〜480℃ (212℉〜896℉)
Air DeliveryBrushless fan with smooth air delivery
Air Volume (Measured at Exhaust)≤120L/min
Soldering Station Temperature Range200℃〜480℃ (392℉〜896℉)
ESD SafeYes
OriginMainland China
Various T12 soldering iron tip types
Figure 8: Examples of T12 soldering iron tip types (T12-B, T12-I, T12-K, T12-2.4D, T12-3C).

10. User Tips

  • The quick heat-up time of the T12 soldering iron is ideal for tasks requiring rapid temperature changes.
  • Utilize the auto-sleep function by consistently placing the soldering iron in its holder when not actively soldering. This significantly extends the life of your tips.
  • For precise work, take advantage of the digital temperature calibration feature to fine-tune your tool's temperature to your specific needs.
  • The low noise level of the hot air gun's brushless fan contributes to a more comfortable working environment.
  • Consider having a variety of T12 tips on hand for different soldering tasks, such as fine-pitch SMD work or larger component soldering.

11. Warranty & Support

For information regarding warranty coverage, technical support, or service, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.