HOCO EW60 True Wireless Bluetooth Earbuds User Manual

1. Introduction

The HOCO EW60 are true wireless Bluetooth earbuds designed for a seamless audio experience with smartphones and other compatible devices. Featuring Bluetooth 5.3, a lightweight design, and touch controls, these earbuds offer clear sound and convenient functionality for daily use.

2. Package Contents

Please check the box for the following items:

• 1x HOCO EW60 Bluetooth Headset (Pair of Earbuds)
• 1x Charging Case
• 1x USB Type-C Charging Cable
• 1x User Manual (this document)

3. Specifications

4. Setup

4.1 Initial Charging

Before first use, fully charge the earbuds and the charging case. Connect the provided USB Type-C cable to the charging case and a power source. The indicator light on the case will show charging status. A full charge takes approximately 1 hour.

4.2 Pairing with a Device

1. Ensure the earbuds are in the charging case and the case is charged.
2. Open the lid of the charging case. The earbuds will automatically power on and enter pairing mode.
3. On your smartphone or Bluetooth-enabled device, go to Bluetooth settings.
4. Search for available devices and select "HOCO EW60" from the list.
5. Once connected, the earbuds will indicate successful pairing (e.g., a voice prompt or indicator light change).

The earbuds feature master-slave switching technology, allowing either earbud to be used independently after initial pairing. They will automatically connect to the last paired device when the case lid is opened.

5. Operating Instructions

5.1 Basic Functions

• Power On: Open the charging case lid.
• Power Off: Place earbuds back into the charging case and close the lid.
• Music Playback: Use touch controls (see section 5.2).
• Call Management: Use touch controls (see section 5.2).
• Voice Assistant: Summon Siri or other voice assistants via touch control.
• Dual-Link: The headset supports connecting to two devices simultaneously, allowing for seamless switching between them.

5.2 Touch Controls

The EW60 earbuds feature touch-sensitive areas for easy control of various functions:

• Sliding Touch Area: Swipe up or down to adjust Volume (+/-).
• Single Tap: Play/Pause music, Answer/Hang up calls.
• Double Tap: Skip to the Next track.
• Triple Tap: Go to the Previous track.
• Long Press (2 seconds): Switch listening mode (e.g., noise reduction modes) or activate voice assistant.

5.3 Noise Reduction Features

The EW60 earbuds incorporate a dual noise reduction system to enhance your listening experience. The in-ear design provides passive noise isolation, complemented by the dual noise reduction technology to minimize environmental distractions.

This feature is optimized for various scenarios:

• Indoor: Reduces human voices and other noises in environments like cafes, shopping malls, and offices.
• Outdoor: Minimizes wind noise and other ambient sounds in outdoor settings such as the seaside or subway.

6. Maintenance

6.1 Cleaning

• Regularly clean the earbuds, especially the ear tips and charging contacts, with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, solvents, or aerosol sprays.
• Ensure no moisture enters any openings.

6.2 Storage

• When not in use, store the earbuds in their charging case to protect them and keep them charged.
• Store in a cool, dry place away from extreme temperatures.

6.3 Water Resistance

The earbuds are waterproof. However, this does not mean they are suitable for swimming or prolonged submersion. Avoid exposing them to high-pressure water or steam. Dry them thoroughly before placing them back in the charging case if they get wet.

7. Troubleshooting

• Earbuds not pairing/desynchronized: If earbuds fail to pair with each other or with your device, try placing them back in the charging case, closing the lid, and then reopening it to re-initiate pairing. If issues persist, a hard reset might be necessary (refer to manufacturer support for specific hard reset instructions as they are not detailed in this manual).
• No sound: Ensure the earbuds are properly connected to your device and the volume is turned up on both the earbuds and your device. Check if the earbuds are charged.
• Charging issues: Verify that the charging cable is securely connected to both the case and the power source. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
• Voice assistant not responding: Ensure your device's voice assistant is enabled and configured correctly. Try long-pressing the touch area for 2 seconds as per the controls.

8. User Tips

• Compatibility: The HOCO EW60 earbuds use standard Bluetooth technology (v5.3) and are compatible with most Bluetooth-enabled devices, including iPhones, Android smartphones, tablets, and computers.
• Audio Codecs: These earbuds support AAC and SBC audio codecs, providing good quality audio streaming across various devices.
• Battery Management: To maximize battery life, always store the earbuds in their charging case when not in use. The case provides multiple charges, extending your listening time significantly.
• Comfort: The lightweight design, optimized based on human auricle feedback, ensures a comfortable wearing experience even during extended use.

9. Warranty and Support

For warranty information and technical support, please refer to the official HOCO website or contact your retailer. Keep your proof of purchase for any warranty claims.