Introduction
The Baseus PocketGo Portable Air Pump is a compact and versatile 2-in-1 device designed for both inflation and deflation of various low-pressure inflatable items. Its super-light design, weighing approximately 130g, makes it ideal for outdoor activities such as camping, beach trips, and pool parties. Equipped with a powerful DC motor, it offers a high airflow of 230L/min and an air pressure of 3.5kPa, allowing for quick inflation and deflation. Additionally, it features an integrated LED light with three modes (Soft, Bright, SOS) for enhanced safety and convenience in low-light conditions.
Safety Information
- Read all instructions before using the device.
- Keep the device away from water and moisture. This product is not waterproof.
- Do not operate the pump near flammable liquids or gases.
- Keep out of reach of children.
- Do not block the air intake or outlet during operation.
- Do not attempt to inflate high-pressure items such as vehicle tires, balloons, basketballs, or volleyballs, as this pump is not designed for such applications.
- Use only the provided charging cable and a compatible 5V=1A power adapter.
- Avoid prolonged continuous operation to prevent overheating. Allow the device to cool down if it becomes warm.
Package Contents
Please check the package for the following items:
- Baseus PocketGo Portable Air Pump
- USB-C Charging Cable
- 4 x Air Nozzles (Swim ring/inflatable toy, Vacuum storage bag, Small air mattress, Large air mattress)
- Lanyard
Product Overview
Familiarize yourself with the components of your Baseus PocketGo Portable Air Pump:
- Deflating Port: Used for extracting air from inflatables and vacuum storage bags.
- Inflating Port: Used for pumping air into inflatables.
- Power Button: Controls power ON/OFF and LED light modes.
- Charging Port (USB-C): For recharging the internal battery.
- LED Lamp: Provides illumination with multiple modes.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Baseus PocketGo Portable Air Pump |
| Model No. | BS-CG017 |
| Color | Stellar White |
| Material | ABS+PC |
| Weight | Approx. 130g |
| Dimensions (L x W x H) | 55mm x 55mm x 71mm |
| Input | 5V⎇1A |
| Inflation Speed | 230L/min |
| Air Pressure | 3.5kPa |
| Battery Capacity | 1600mAh |
| Charging Time | 2-3 hours |
| Continuous Use (Full Charge) | 22-24 minutes |
Setup
- Charge the Device: Before first use, fully charge the air pump using the provided USB-C cable and a 5V=1A power adapter. The LED lamp will indicate charging status. A full charge typically takes 2-3 hours.
- Select Nozzle: Choose the appropriate air nozzle for the item you intend to inflate or deflate. Refer to the 'Operating Instructions' section for guidance on nozzle selection.
- Attach Nozzle: Firmly attach the selected nozzle to either the inflating port or deflating port of the pump, depending on your desired function.
Operating Instructions
Power On/Off
- To turn the pump ON: Press and hold the power button for 2 seconds.
- To turn the pump OFF: Press and hold the power button for 2 seconds.
Inflation
- Attach the appropriate nozzle to the inflating port.
- Insert the nozzle firmly into the valve of the item to be inflated.
- Press and hold the power button for 2 seconds to turn the pump ON. The pump will begin inflating.
- Monitor the inflation process and turn the pump OFF once the desired firmness is reached.
Deflation
- Attach the appropriate nozzle to the deflating port.
- Insert the nozzle firmly into the valve of the item to be deflated.
- Press and hold the power button for 2 seconds to turn the pump ON. The pump will begin deflating.
- Turn the pump OFF once the item is fully deflated.
Emergency Light Operation
- With the pump ON, briefly press the power button to cycle through the light modes: Soft mode (130LM) > Bright mode (400LM) > SOS mode > OFF.
Nozzle Usage Guide
- Swim Ring/Inflatable Toy Air Nozzle: For small inflatables like swimming rings and pool toys.
- Vacuum Storage Bag Air Nozzle: For use with vacuum storage bags to compress items. (Note: This nozzle often requires the small air mattress nozzle as an adapter).
- Small Air Mattress Nozzle: For smaller air mattresses and similar inflatables.
- Large Air Mattress Nozzle: For larger air mattresses and inflatable beds.
Important: This product is NOT suitable for high-pressure items such as balloons, vehicle tires, basketballs, volleyballs, or other similar high-pressure products.
Note: This product is not waterproof. Please ensure the pump and the inflatables are dry during use to prevent damage.
Maintenance
- Cleaning: Wipe the exterior of the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the pump and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the pump at least once every three months if not in regular use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not turn on. | Low battery or incorrect power button operation. | Ensure the pump is charged. Press and hold the power button for 2 seconds to turn it on. |
| Pump turns on but does not inflate/deflate. | Nozzle not properly attached or air ports blocked. | Check that the nozzle is securely attached to the correct port (inflating or deflating). Ensure air ports are clear of obstructions. |
| LED light works, but pump does not operate. | Insufficient battery charge for pump motor, or pump is in light-only mode. | Fully charge the pump. Ensure you press and hold the power button for 2 seconds to activate the pump function, not just cycle the light. |
| Slow inflation/deflation. | Incorrect nozzle size or low battery. | Use the most appropriate nozzle for the item. Fully charge the pump. |
User Tips
- Power Control: Remember to press and hold the power button for 2 seconds to turn the pump on or off. A short press will cycle through the LED light modes.
- Nozzle Compatibility: Always select the correct nozzle for your inflatable. For vacuum storage bags, you may need to use the small air mattress nozzle as an adapter for the vacuum nozzle.
- Avoid High Pressure: This pump is designed for low-pressure inflatables. Do not attempt to inflate items like car tires, sports balls, or balloons, as it can damage the pump and the item.
- Keep Dry: The pump is not waterproof. Ensure both the pump and the inflatable item are dry before and during use to prevent electrical hazards and damage.
Frequently Asked Questions (FAQ)
- Q: What items can this pump inflate?
- A: This pump is suitable for low-pressure inflatables such as air mattresses, inflatable beds, swimming rings, inflatable toys, and certain types of inflatable boats (non-high pressure).
- Q: What items is this pump NOT suitable for?
- A: It is not suitable for high-pressure items like balloons, vehicle tires, basketballs, volleyballs, or other similar high-pressure products.
- Q: How do I turn the pump on/off?
- A: Press and hold the power button for 2 seconds to turn the pump on or off.
- Q: How do I use the emergency light?
- A: With the pump on, briefly press the power button to cycle through Soft, Bright, and SOS light modes.
- Q: How long does it take to charge?
- A: A full charge typically takes approximately 2-3 hours.
- Q: How long can it operate on a full charge?
- A: The pump can provide 22-24 minutes of continuous use on a full charge.
- Q: Is the pump waterproof?
- A: No, the Baseus PocketGo Portable Air Pump is not waterproof. Please keep it and the inflatables dry during use.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.
