CYCPLUS M2 Wireless GPS Bicycle Computer User Manual

1. Introduction

The CYCPLUS M2 is a smart GPS bicycle computer designed to provide comprehensive cycling data for road bikes and MTBs. It features an active GPS antenna for rapid and accurate positioning, a ublox GPS chip for enhanced sensitivity, and a clear 2.5-inch screen for easy readability day and night. With 16MB of internal memory, it can store up to 150 hours of cycling data. The device supports Bluetooth 5.0 for quick data synchronization to your mobile phone and ANT+ for connecting to external sensors like speed, cadence, heart rate monitors, and power meters. It also includes convenient features such as automatic power-off and auto-pause.

The CYCPLUS M2 Bicycle Computer, showing its display interface.

2. Package Contents

Please check the box for the following items:

• CYCPLUS M2 GPS Bike Computer
• Bike Computer Mount
• Rubber Pad
• Type-C Charging Cable
• Rubber Band x 3
• Instruction Manual (this document)

All items included in the CYCPLUS M2 package.

3. Installation Instructions

Follow these steps to install your CYCPLUS M2 on your bicycle handlebars:

1. Overlap the base and rubber mat.
2. Hang the rubber rings on the base.
3. Cross the rubber rings and secure them to the handlebars.
4. Rotate the M2 cycling computer into the base until it clicks securely.

Note: An optional CYCPLUS Z1/Z2 bike computer mount can be purchased separately for alternative mounting.

Step-by-step guide for installing the CYCPLUS M2 on your bike.

4. Button Description

The CYCPLUS M2 features four buttons for navigation and control:

• [L1] Button (Left Top):
• Press: Start/Pause Recording
• Long Press: Power On/Off
• [L2] Button (Left Bottom):
• Press: Count Lap
• Long Press: Save Record
• [R1] Button (Right Top):
• Press: Go to next page
• Long Press: Enter/Quit Settings
• [R2] Button (Right Bottom):
• Press: Turn on/off Backlight

Overview of button functions on the CYCPLUS M2.

5. Basic Operation

Here's how to get started with your CYCPLUS M2:

1. Power On: Long press the L1 button to turn on the device.
2. GPS Location - Quick Start: To receive satellite signals, remain static in an open and unobstructed environment. The device will acquire a GPS signal within a few minutes. A GPS icon will light up when connected.
3. Start Recording: Once the GPS signal is connected, press the L1 button to start recording. A play icon will appear.
4. Save Recording Data: After your ride, long press the L2 button to save the recording data. The play icon will disappear.
5. Power Off: Long press the L1 button to turn off the device.

Example of current data display during a ride.

6. Settings

To access settings, long press the R1 button. Use short presses of R1 to navigate through the setting pages (C1-C9). Press L1 to start setting, R1 to modify digits/options, L2 to switch settable digits, and L1 again to finish setting. Long press R1 to return to the home page.

Overview of common settings on the CYCPLUS M2.

6.1. ANT+ Sensors Connection (C2)

1. Long press R1 to enter settings, then short press R1 until 'C2' is displayed.
2. Press L1 to start searching for ANT+ sensors. Unlinked sensor digits will flash.
3. Data will appear when the sensor has been connected.
4. To unpair sensors, switch to the 'C9' page (Odometer setting), then press the L1 button to unpair all paired sensors.

6.2. Wheel Circumference Setting (C3)

1. Long press R1 to enter settings, then short press R1 until 'C3' is displayed.
2. Press L1 to start setting. The settable digit will flash.
3. Press R1 to modify the digit.
4. Press L2 to switch the settable digit.
5. Press L1 to finish setting. All digits will flash briefly.

6.3. Time Zone Setting (C4)

1. Long press R1 to enter settings, then short press R1 until 'C4' is displayed.
2. Press L1 to start setting.
3. Press R1 to modify the time zone (e.g., UTC+1, UTC-5).
4. Press L1 to finish setting. Time zone digits will flash briefly.

6.4. Speed Unit Setting (C5)

1. Long press R1 to enter settings, then short press R1 until 'C5' is displayed.
2. Press L1 to start setting.
3. Press R1 to switch between KMH (kilometers per hour) and MPH (miles per hour).
4. Press L1 to finish setting. The unit will flash briefly.

6.5. Temperature Unit Setting (C6)

1. Long press R1 to enter settings, then short press R1 until 'C6' is displayed.
2. Press L1 to start setting.
3. Press R1 to switch between °C (Celsius) and °F (Fahrenheit).
4. Press L1 to finish setting. The icon will flash briefly.

6.6. Factory Reset (C7)

1. Long press R1 to enter settings, then short press R1 until 'C7' is displayed.
2. Press L1 to start setting.
3. Long press L2 to restore factory settings. The computer will turn off after the reset.

6.7. Odograph Setting (C8)

The odograph setting allows you to set the total distance (ODO) manually.

1. Long press R1 to enter settings, then short press R1 until 'C8' is displayed.
2. Press L1 to start setting. The settable digit will flash.
3. Press R1 to modify the digit.
4. Press L2 to switch the settable digit.
5. Press L1 to finish setting. All digits will flash briefly.

7. App Connection & Data Synchronization

The CYCPLUS M2 can connect to the "CYCPLUS Fit" app for data management and synchronization with Strava.

7.1. Downloading the App

Scan the QR code provided in the manual or search for "CYCPLUS Fit" on Google Play Store (for Android) or Apple App Store (for iOS) to download the app. Register an account using your email.

7.2. Connecting the M2 to the App

1. Ensure Bluetooth is enabled on your smartphone.
2. Open the "CYCPLUS Fit" app.
3. Go to the "Add Device" section and select "M2".
4. The app will search for your device. Once found, select it to connect.

7.3. Syncing Data to Strava

You can sync your activity ".Fit" files to Strava via Bluetooth 5.0 through the CYCPLUS Fit app. This allows you to sync 100km of data in just 30 seconds.

The CYCPLUS Fit App interface for data management.

Data synchronization process from CYCPLUS M2 to Strava via the app.

8. Specifications

The 2.5-inch large screen displays data at a glance.

The M2 offers up to 70 hours of battery endurance with a Type-C charging port.

9. Troubleshooting & FAQ

• Does the speedometer need a mobile phone with an app to work?
  No, the CYCPLUS M2 functions independently to record your ride data. The app is primarily used for data synchronization and analysis.
• Can I select the gradient on the screen?
  Yes, the device is capable of displaying gradient data.
• Is there tempered glass for this meter?
  The product specifications do not explicitly mention tempered glass.
• Does it have the Polish language?
  The device's interface language is English.
• Are speed, cadence, and power sensors included or separate?
  The CYCPLUS M2 supports external ANT+ sensors for speed, cadence, heart rate, and power, but these sensors need to be purchased separately.
• GPS signal acquisition takes a long time.
  Ensure you are in an open and unobstructed environment. The device may take a few minutes to acquire a GPS signal after startup. Remaining static can help with faster positioning.
• Screen contrast is disappointing.
  While the device features a 2.5-inch black and white display for clarity, individual perception of contrast may vary. Ensure the backlight is adjusted to your preference.

10. User Tips

• The M2 is praised for its ease of operation and readability, making it user-friendly for cyclists.
• Users appreciate the long battery life and quick, accurate GPS updates.
• The device offers good compatibility with various ANT+ sensors, including heart rate monitors and power meters.
• Connecting and integrating with the CYCPLUS Fit app works well for data analysis and Strava synchronization.
• The screen size is generally considered good, offering clear visibility of data.
• If you encounter initial setup difficulties, refer to the detailed instructions in this manual or contact customer support.

11. Maintenance

To ensure the longevity and optimal performance of your CYCPLUS M2, follow these maintenance guidelines:

• Cleaning: Wipe the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Water Resistance: The M2 is IPX6 waterproof, meaning it is resistant to rain and splashes. However, it is not designed for submersion in water. Avoid prolonged exposure to heavy rain or direct water jets.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge it regularly, especially if storing for extended periods.

12. Warranty & Support

The CYCPLUS M2 comes with a 2-year warranty, covering free replacement or repair for manufacturing defects.

Manufacturer Information:
Chengdu Chendian Intelligent Technology Co., Ltd.

After-sales Support:
For any inquiries or support needs, please contact us via email:

Email: steven@cycplus.com

Please refer to the official user manual PDF for more detailed information and specific instructions: User Manual (PDF)